Palson TECHNO Owner's manual

�

Placa de inducción

Induction hotplate

Plaque à induction

Placa de indução

Induktionsplatte

Piastra a induzione

Inductieplaat

Keramikñ pláka

Индукционная плитка

Indukciós főzőlap

Ñndüksiyon ocaxñ

Techno

Cód. 30511

MODO DE EMPLEO

OPERATING INSTRUCTIONS

MODE D’EMPLOI

MODO DE EMPRÊGO

GEBRAUCHSANLEITUNG

ISTRUZIONI

GEBRUIKSAANWIJZING

TROPOS CRHSHS

HASZNÁLATI UTASÍTÁS

KULLANMA WEKLI

�

GB

E

F

P

D

I

NL

GR

RU

AR

HU

TR

2

ENCENDIDO / APAGADO

ON / OFF

MARCHE / ARRET

LIGADO / DESLIGADO

EINGESCHALTET / AUSGESCHALTET

ACCESO / SPENTO

AAN / UITENERGOPOIOIHSH

QESH SE LETOURGIA / APENERGOPOIOIHSH

ВКЛ./ВЫКЛ

BEKAPCSOLÁS/KIKAPCSOLÁS

AÇIK/KAPALI

POTENCIA (W)

POWER (W)

PUISSANCE (W)

POTÊNCIA (W)

LEISTUNG (W)

POTENZA (W)

VERMOGEN (W)

ISCUS(W)

МОЩНОСТЬ (Вт)

TELJESÍTMÉNY (W)

GÜÇ (W)

TEMPERATURA (ºC)

TEMPERATURE (ºC)

TEMPERATURA (ºC)

TEMPERATUR (ºC)

TEMPERATURA (ºC)

TEMPERATUUR (ºC)

QERMOKRASIA (ºC)

ТЕМПЕРАТУРА (ºC)

HŐMÉRSÉKLET (ºC)

ISI (ºC)

TIEMPO (minutos)

TIME (minutes)

TEMPS (minutes)

TEMPO (minutos)

ZEIT (Minuten)

TEMPO (minuti)

TIJD (minuten)

CRONOS (leptá)

ВРЕМЯ (мин.)

IDŐ (perc)

ZAMAN (Dakika)







�

Page is loading ...

6

7

GB

Our products are developed to meet the highest quality, performance and design standards. We hope you enjoy your

new PALSON TECHNO induction hotplate.

General safety precautions

The product you have bought has been made using state-of-the-art technology and complies with accepted safety

standards. However, there are certain potential hazards. Use the induction hotplate only if it is in perfect condition and

follow these operating instructions! Only use the appliance for its intended purpose.

Attention: To avoid possible injuries or electric shocks, remember the following precautions:

• Never touch the appliance or the plug with wet hands.

• Never connect the appliance to the same socket as other appliances. Connect the appliance to a suitable socket.

• Never move the appliance by pulling on the power cord.

• Do not move the induction hotplate while it is cooking or with hot cooking utensils on it.

• Do not place empty containers on the appliance.

• Do not place metal objects on the appliance.

• Regularly check the power cord for damage. Never operate the appliance if the power cord is damaged. If the power

cord is not in good condition, change it at an authorised service centre.

• Never use the appliance if it is malfunctioning, is damaged or has been dropped.

• Do not leave the appliance unattended while it is operating. Keep away from children and people who are not able

to use it.

• Do not immerse the appliance in water or other hot liquids and do not wash in the dishwasher.

• Do not use the appliance on a metal table.

• Repair and maintenance of the appliance can only be performed by qualified experts, using original spare parts and

accessories. Never try to repair the appliance yourself!

• If the power cord is damaged, it must be replaced by the manufacturer or its authorised service centre or by a

qualified technician in order to avoid hazards.

• This product must not be used by children or by other people without assistance or supervision if their physical,

sensory or mental condition limits safe use of the appliance. Children must be watched to make sure that they do

not play with the appliance.

Installing the appliance

• Place the appliance on a flat, stable surface.

• Never place the appliance on an inflammable surface (e.g., dishcloth, carpet, etc.).

• Do not block the appliance’s ventilation holes. This could cause it to overheat. Place at least 5 - 10 cm from walls

and other objects.

• Do not place the induction hotplate near appliances or objects that are sensitive to magnetic fields (e.g., radios, TV

sets, cassette recorders, etc.).

• Do not place the induction hotplate near fires, heaters or other sources of heat.

• Make sure that the power cord is not damaged or squashed under the appliance.

• Make sure that the power cord is not touching sharp edges and/or hot surfaces.

Handling the appliance

• Before turning on the appliance, check that the voltage rating appearing on the nameplate matches your home’s

mains voltage. A faulty connection may seriously damage the appliance and cause injuries.

• The hotplate’s surface is made of heat-resistant “black glass”. If it is damaged, unplug the appliance immediately

from the mains and send to an authorised service centre.

• We advise that you do not place metal kitchen utensils, saucepan or frying pan lids, knives or other metal objects

on the hotplate. They may become hot when the appliance is turned on.

• Do not place magnetic objects such as credit cards, cassettes, etc., on the “black glass” surface while the appliance

is operating.

• To avoid overheating, do not place aluminium foil or metal dishes on the appliance.

• Do not insert objects such as wires or tools in the ventilation holes. This can cause electric shocks.

• Do not touch the hot “black glass” surface. Although the induction hotplate does not heat during cooking, the

temperature of the cooking utensils does heat the hotplate!

• Do not heat unopened cans on the induction hotplate. Heated cans may explode so they must at least be opened

first.

• Scientific tests have shown that induction hotplates are not dangerous. However, people who have pacemakers

should keep at least 60 cm from the appliance while it is operating.

6

7

Operating the appliance

• Plug into a mains socket.

• The monitoring lamp on the “ENCENDIDO/APAGADO” switch lights and you will hear a beep.

• The appliance is now on standby.

• Place a suitable cooking utensil in the centre of the hotplate.

• Press the “ENCENDIDO/APAGADO” switch once to turn on the induction hotplate. The “power” monitoring lamp

blinks and you will hear a beep.

• Press the “POTENCIA” key. The preset power rating is “1300”; the appliance starts operating.

• You can use the ▲ / ▼ keys to change the values at any time, setting them to 300W, 600W, 800W, 1000W, 1200W,

1300W, 1500W, 1600W, 1800W or 2000W.

• Press the “TEMP” key to select the temperature. The preset temperature of “120°C” is selected and the appliance

starts operating.

• You can use the ▲ / ▼ keys to change the values at any time, from 60 to 240°C. (Temperature settings: 60, 80,

100, 120, 140, 160, 180, 200, 220 and 240°C)

• Timer function. After selecting the temperature mode, press the “TIEMPO” button. The number “0” will appear

on the screen. Use the ▲ / ▼ keys to select the operating time in 5-minute increments (up to a maximum of 180

minutes). When the time expires, a beep will sound and the appliance will automatically enter the standby mode.

Note: You can change the duration of the timer function at any time using the arrow keys. Because of the appliance’s

memory function, changing the time does not change the power or temperature settings.

You can also change the power or temperature settings using the appropriate buttons to change the settings without

changing the preset time.

• When you have finished cooking or heating, unplug the appliance from the mains!

• Do not use empty cooking utensils on the “black glass” surface. Heating empty saucepans or frying pans activates

the overheating protection and the appliance will turn off.

• Do not operate the appliance if it is damaged in any way or malfunctions.

• Using accessories or spare parts not recommended by the manufacturer may damage the appliance and cause

injuries.

Cleaning and maintenance

• Unplug the appliance from the mains before cleaning. Do not use caustic cleaning products and make sure that no

water enters the appliance.

• To protect yourself against electric shocks, never immerse the appliance, the power cord or the plug in water or

other liquids.

• Clean the “black glass” surface with a damp cloth or use a gentle, non-abrasive soap solution.

• Clean the body and control panel with a soft cloth or a mild detergent.

• Do not use products that contain petrol to avoid damaging the plastic parts, body or control panel.

• Do not use inflammable, acid or alkaline materials or substances near the appliance, as this could shorten the

appliance’s life and cause an explosion when it is turned on.

• Make sure that the bottom of the cooking utensils does not scratch the “black glass” surface.

• Make sure that the appliance is clean before storing in a dry place.

Thank you for choosing one of our products.

Page is loading ...

Pol. Ind. Les Ginesteres - C/ Hostalets, 2-4-6

08293 Collbató - Barcelona (Spain)

Tel. +34 93 777 98 50 - Fax +34 93 777 93 07

Videoconferencia: +34 93 777 97 13

www.palson.com e-mail: [email protected]

Palson TECHNO Owner's manual

Palson TECHNO Owner's manual

in other languages

Related papers

Other documents