Page is loading ...
KN-HDMISW10
KN-HDMISW20
2
2 PORT HDMI SWITCH
4 PORT HDMI SWITCH
7
2-PORT-HDMI-SWITCH
4-PORT-HDMI-SWITCH
12
COMMUTATEUR HDMI 2 PORTS
COMMUTATEUR HDMI 4 PORTS
17
2 POORTS HDMI SWITCH
4 POORTS HDMI SWITCH
22
COMMUTATORE HDMI A 2 PORTE
COMMUTATORE HDMI A 4 PORTE
27
CONMUTADOR HDMI DE 2 PUERTOS
CONMUTADOR HDMI DE 4 PUERTOS
32
2-PORTOS HDMI KAPCSOLÓ
4-PORTOS HDMI KAPCSOLÓ
37
2 PORTIN HDMI-KYTKIN
4 PORTIN HDMI-KYTKIN
42
2 PORTARS HDMI-BRYTARE
4 PORTARS HDMI-BRYTARE
47
2 PORTOVÝ PŘEPÍNAČ SIGNÁLU HDMI
4 PORTOVÝ PŘEPÍNAČ SIGNÁLU HDMI
52
SWITCH CU 2 PORTURI HDMI
SWITCH CU 4 PORTURI HDMI
Power button
select button
2
ENGLISH
Introduction:
The HDMI switch routes high defi nition video (in multiple resolutions up to 1080p) and digital
audio from any of the several sources to display units. All the inputs accommodate the
connections of the high defi nition video sources simultaneously, such as satellite systems and
HD DVD players. The output sends the high defi nition audio/video signals to a high defi nition
display. Switching is done via the IR remote that is provided with the unit or by the selection
button on the switch.
Features:
• Support with HDMI1.3b
• Supports 12-bit deep colour
• 24K gold plated connector
• High performance up to 2.5 GBps
• Switches easily between several HDMI sources
• Maintains high resolution video - sharp HDTV resolutions up to 1080p, 2k, and computer
resolutions up to 1920 x 1200 are easily achieved
• Discrete IR remote (included)
• HDMI pass-through
• HDCP pass-through
Specifi cations:
Signal Inputs/Output
Input Video Signal 0.5-1.0 V p-p
Input DDC Signal 5 V p-p (TTL)
Maximum Single Link Range 1920X1200, 1080p
Output Video HDMI 1.3b + HDCP 1.0/1.1
Video format supported
VGA 640x480, 800x600, 1024x768, 1920x1200
DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080P
Digital Signal I/O
HDMI Compliance HDMI 1.3b
Operating Frequency
Video Amplifi er Bandwidth 2.5 GBps/250 MHz
Frequency Up to 250 MHz
Resolutions (HDTV)
Interlaced (50&60Hz) 480i, 576i, 1080i
Progressive (50&60Hz) 480p, 576p, 720p,1080p
Environmental
Operating Temperature 0 °C to +70 °C
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature -10 °C to +80 °C
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5 V DC@2A
Regulatory Approvals
Converter Unit FCC, CE, UL
Power Supply UL, CE, FCC
3
Channel Selection:
You can select the channels you want to access in 2 ways: front panel push button selection
and the remote control included with the package content.
Front panel push button selection:
The front panel push button is used to select the desired channel on the HDTV. Pressing the
button during normal operation will cause the next channel to be selected.
Remote control selection:
The channel can also be selected by the remote control. Push the IR code button on the remote
panel for 2 seconds.
Connections:
Front view:
Rear view:
1) Power switch Remote control:
2) Power indication LED
3) Infra Red eye
4) Selected port LED
5) Output indication LED
6) Selection push button
7) Output HDMI port
8) Input HDMI port
9) Power adapter connection
10) Input port selection buttons
4
Connections and Operation:
Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the HDMI input source into the HDMI switcher. (Input cables are optional)
• Connect the HDMI output device into the switcher.
• Insert the DC side of 5 V power supply into the switcher and then connect the AC side of the
power supply into the wall outlet.
• Power on all input and output devices.
HDMI DVD
HDMI DVD
HDMI DVD
HDMI DVD
HDMI Switch
HDMI Monitor
Warning: If a DVI device does not appear to work, make certain that the device is HDCP
compliant. A non-HDCP compliant DVI device will not work with a signal that has HDCP
encoding present
5
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC ’s-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: info@nedis.com
Declare that product:
Name: HDMI switch 2 & 4 port
Model: KN-HDMISW10 & KN-HDMISW20
Description: HDMI signal switch 2 or 4 input to 1 output
Is in conformity with the following standards
EMC: EN 55022: 1998 + A1: 2000 + A2: 2003
EN 55024: 1998 + A2: 2003
LVD: EN 55022: 2006
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3: 1995 + A1: 2001 + A2: 2005
EN 55024: 1998 + A1: 2001 + A2: 2003
Following the provisions of the 2004/108/EC directive.
‘s-Hertogenbosch, 2 February 2008
Mrs. J. Gilad
Purchase Director
6
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To reduce risk of electric shock, this product should ONLY
be opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifi cations of the product or
damage caused due to incorrect use of this product.
General:
Designs and specifi cations are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Attention:
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate
collections system for these products.
Copyright ©
/
