PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale A
venue #1
02, West St Paul, Minnesota 55
118 ▪ Phone: 65
1-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 65
1-552-1
799 ▪ Email:
[email protected] ▪ www
.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
10
VRR-TC21B ASSEMBLY INSTRUCTIONS–LEFT SIDE ROTATION
L POSTS
SEE USER GUIDE FOR ADJUSTMENTS
DRIVE SHAFT SEALING
Adjust the Cylinder Flow
Control Screw to allow
approximately 3 seconds
time for the ladder to glide
down when operating the
loaded Ladder Rack.
18
For additional information regarding your VRR-TC21B Ladder Rack,
please visit the Prime Design website at: www.primedesign.net.
Using a QR code reader in your smart phone or tablet, read the QR
Code shown below and follow the same steps as you would from your
laptop or computer.
If you’re viewing this document as an interactive PDF, you may simply
click on the QR Code below to access the Prime Design website.
CYLINDER ADJUSTMENT ADDITIONAL INFORMATION
Torque to 90 in-lbs
Apply Silicone Sealant
to Connecting Bar ends
16.1
16.1
16.2
17.1
17.2