Whirlpool AKP 640 WH Program Chart

Brand: Whirlpool

Model: AKP 640 WH

Type: Program Chart

This manual is also suitable for

AKP 640 NB

Whirlpool AKP 640 WH is a kitchen appliance that provides several functions for cooking and baking.

The oven features a range of heating options, including static, static with fan, grill, grill with fan, and defrost, making it suitable for various cooking needs. The static function is ideal for cooking food on the same level, while the static with fan function allows cooking on two different levels. The grill function is perfect for grilling small pieces of meat and making toasts, and the grill with fan function is suitable for cooking larger joints of meat. The defrost function is designed to thaw frozen food to room temperature.

Whirlpool AKP 640 WH is a kitchen appliance that provides several functions for cooking and baking.

AKP 640

PRODUCT DESCRIPTION SHEET

5019 310 53221

OVEN

First...Last: Runner positions

1. Control panel

2. Cooling fan (not visible)

3. Upper heating element

4. Grill element

5. Oven light

6. Seat for turnspit

7. Fan

8. Lower heating element (not visible)

9. Oven door hinges

10.Oven door

Accessories:

• Grid

• Drip tray

• Catalytic panels

• Turnspit (to be used with the

Grill function only)

CONTROL PANEL

1. Programmer

2. Thermostat control knob

3. Functions selector knob

4. Thermostat red indicator light

Important: An optional kit consisting of an oven door

glass and of relevant mounting components, is

available by the After-Sales Service. The use of the kit

reduces the temperature of the outer oven surface and

is strongly recommended if there are kids in the house.

Code N°: 4819 310 39186.

0 Off

Oven light

STATIC FUNCTION

Use when all the food is on the same runner level.

- Pre-heat the oven to the required cooking

temperature and place the food inside as soon as the

red thermostat indicator light switches off.

- Ideally, the shelf should be on the second runner

level when using the static function.

STATIC FUNCTION + FAN

Use this function when cooking on two different levels.

- Oven pre-heating is not necessary (except for pizzas

and focaccia).

- Switch the position of the dishes in the oven 10

minutes before the end of cooking time.

- Remove the cooked dish and, if necessary, continue

cooking the other one for as long as required.

GRILL FUNCTION

Use the grill function to cook small pieces of meat

(steaks, sausages) and for making toasts.

- The oven door must be closed during the cooking cycle.

- Pre-heat the grill for about 5 minutes.

- Arrange the meat on the grid with the drip tray

underneath. Pour water in the drip tray to cover the

bottom to reduce smoke and fat spatters.

- Turn over the meat about half-way through cooking

time.

GRILL + TURNSPIT FUNCTION

- Place the food on the spit and secure it with the

two forks.

- Place the grid supporting the spit inside the oven

on the second runner.

- Insert the spit in the hole provided on the rear wall,

laying it on the support grid.

- Remove the handle from the spit.

- Place the drip tray under the grid. We suggest you

poured some water in the drip tray to reduce

smokes and grease spatters.

- Close the oven door.

GRILL FUNCTION + FAN

Ideal for large joints, pork, chicken and roast beef.

- The oven door must be closed during the cooking cycle.

- Place the meat on the grid with the drip tray

underneath. Pour water in the drip tray to cover the

bottom to reduce smoke and fat spatters.

- Turn over the meat about half-way through cooking time.

DEFROST FUNCTION

Ideal for thawing frozen food to room temperature.

- The food should be inserted in the oven in its

wrapping to prevent it from drying out.

Turn the selector knob to the required symbol.

The oven light switches on.

• Turn the thermostat knob clockwise to the required

temperature.

The red thermostat indicator light switches on.

• When the required temperature is reached, the red

thermostat indicator light switches off.

End of the cooking cycle:

• Return the knobs to the OFF position (0-•).

OVEN FUNCTIONS

SWITCHING THE OVEN ON

First

Last

mportant: the programmer symbols are given as an indication

only; for correct operation of the programmer, follow the

instructions and illustrations given on these pages.

CONTROL BUTTONS AND SYMBOLS

1. Button used to select minute minder with acoustic signal

2. Button used to set the cooking duration

3. Button used to set the end-of-cooking time

4. Button used to select manual operation

5. Button used to set or change data

6. Button used to set or change data

AUTO:

when permanently alight, indicates operation of the

oven in automatic mode.

AUTO:

will also blink to confirm end-of-cooking, prompt

further programming or indicate a wrong selection.

indicates that the oven is in operation and enabled in

manual mode.

indicates operation of the minute minder.

SETTING THE CLOCK, AND SELECTING MANUAL

OPERATION

When the appliance is installed new, or following a power

failure, digits

0:00

and the

AUTO

symbol will blink in the

display. All other functions remain inhibited.

Press and hold buttons

and

simultaneously, and set the

clock using buttons

and

To operate the oven manually, press button

: the symbol

will be displayed.

USING THE MINUTE MINDER WITH ACOUSTIC SIGNAL

This function is independent of oven operation

• Press button

: digits

0:00

are displayed

• Press button

to display the desired cooking time.

Having released the buttons, or a few seconds afterwards, the

actual time and the symbol are displayed.

The acoustic signal warns that the set time has elapsed.

Press button

to silence the acoustic signal.

PROGRAMMING THE COOKING TIME

Press button

: digits

0:00

are displayed; set the desired

cooking time with buttons

and

. After a few seconds, the

actual time is displayed with

AUTO

and the symbol both

permanently alight.

• Set the oven control knob to the temperature required:

the oven will come into operation immediately.

• Once the cooking time has elapsed, an acoustic signal

indicates that the oven has switched off.

Return the oven control knob to position

“0”

, then press

button

to silence the acoustic signal.

Note: the time remaining until end-of-cooking can be checked

or altered at any moment by pressing button

The end-of-cooking time can also be displayed by pressing button

USING THE PROGRAMMER

PROGRAMMING DURATION AND END OF COOKING

TIME

• Press button

: digits

0:00

are displayed; set the desired

cooking time with buttons

and

. After a few seconds,

the actual time is displayed with

AUTO

and the

symbol both permanently alight.

• Press button

to set the end of cooking time, which is

selected using buttons

and

. The symbol will now go

out, and reappear again when the oven comes into operation

automatically at the start of the programmed duration.

• Set the oven control knobs to the temperature and

functions required.

Once the cooking time has elapsed, an acoustic signal

indicates that the oven has switched off.

Return the oven control knob to position

“0”

, then press

button

to silence the acoustic signal.

USING THE PROGRAMMER

Whirlpool AKP 640 WH Program Chart

Brand: Whirlpool

Model: AKP 640 WH

Type: Program Chart

This manual is also suitable for

AKP 640 NB

Whirlpool AKP 640 WH is a kitchen appliance that provides several functions for cooking and baking.

Download PDF

report

Whirlpool AKP 640 WH Program Chart

This manual is also suitable for

Whirlpool AKP 640 WH Program Chart

Related papers

Other documents