AHA CSLED-84 Setup Manual

Brand: AHA

Model: CSLED-84

Category: Supplementary music equipment

Type: Setup Manual

AHA CSLED-84 is an interactive LED display designed for indoor use in a landscape orientation, featuring a large effective screen size and touch detection technology. With its ability to connect to computers and other devices via RGB, HDMI, and USB, the CSLED-84 offers versatile display options and touch interactivity. The display's sturdy construction, VESA mounting compatibility, and 100 kg weight capacity make it suitable for mounting on walls, stands, or other supports, meeting the demands of various commercial and educational applications.

LED Interactive

Setup Manual

CSLED-84

Thank you for purchasing your AHA Interactive LED display. To ensure safe and stable operation of

this product, please read and follow all instructions and precautions carefully. If you encounter any

difficulties or faults in operation or quality, please contact your AHA dealer immediately. More

information about AHA and our products can be found at www.ahatouch.com.

Record your display’s Model and Serial numbers.

They can be found on the rear of the product and are helpful in reporting loss, theft, or service issues.

Dear AHA Customer

IMPORTANT :

1. Read these instructions.

2. Keep these instructions for future reference.

3. Heed all warnings.

4. Follow all instructions.

REMEMBER TO :

Do not use this product near water. Do not install the product in a place where water can splash onto it or

near devices such as air conditioners where water may accumulate.

Clean only with a dry or damp cloth. Avoid spraying aerosols or liquids directly on the product.

Do not use accessories or attachments that have not been recognized by the manufacturer.

When mounting the product, follow the installation instructions recommended by the manufacturer.

Do not block any ventilation openings. Install the display in a well-ventilated area or cabinet. Ensure that

proper ventilation is available, as insufficient ventilation will shorten the product’s lifespan.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses

(including amplifiers) that produce heat.

Important Safety Precautions

Model No. :

Serial No. :

This manual is to be used for the installation of your AHA interactive display. Operational manuals

and software can be found on the CD-ROM provided with the display, or at the AHA website

www.ahatouch.com. Adobe Reader is required to read all files.

After removing the product from its

packaging, firmly grasp the handle and

bottom bezel to move as shown

in the picture below.

- Keep the product horizontally level to

move stably.

- Do not lift from the very edges of the

bottom of the product.

- 2 -

- 3 -- 4 -

Do not remove the housing or blades of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

Route the power cord so that it is not walked on or pinched. Make sure the cable is uninterrupted at

receptacles or power bars and at the point where it exits from the display.

Move and mount only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the product. Be careful moving cart/apparatus combinations to avoid injury from tip-over.

This product’s screen is made of glass, and it may break if dropped or struck with significant force. Use

caution if the screen breaks to avoid injury due to broken glass.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Do not overload the receptacle or power cord the product has been connected to. This can cause strain

on equipment and create a risk of fire or electrical shock.

Never insert liquids or objects into vents or holes in the display. This can damage the product’s internal

components and high voltages produce risks for injury.

Do not service the product by yourself. Due to the nature of the product the risk of personal injury is high.

Refer all service to qualified service personnel.

Seek repair by a professional in any of the following conditions. Be sure to unplug the display from its

power source.

a. When the product was exposed to liquids or foreign objects.

b. When the power cord or plug is damaged.

c. When the product does not operate properly in either touch performance or picture

display. Do not attempt to adjust controls beyond those described in the instructions, as

this may cause damage.

d. When the product has been dropped or damaged

To completely disconnect this apparatus from its AC power source, disconnect the power cord from the

AC receptacle.

Conduct a safety inspection after installation or repair to confirm that the above precautions have been

adhered to.

The nature of this product is such that it should not be used as a means of industrial control, medical life

support control, or weapons systems control.

Use the cables provided with this product, and be sure that other cables used are properly shielded.

Note: Prolonged use of the display at high volume may cause damage to your ears.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

This symbol is intended to alert the user to the presence of un-insulated "dangerous

voltage" within the product's enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the product.

(Applicable in the European Union and other European countries with separate

collection systems)

This marking shown on the product or its literature, indicates that it should not be

disposed of with other household waste at the end of its working life. To prevent

possible harm to the environment or damage to health from uncontrolled waste

disposal, please separate this from other types of waste and recycle it responsibly to

promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product,

or their local government office, for details of where and how they can take this item for

environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of

the purchase contract. This product should not be mixed with other commercial wastes

for disposal.

Note

• Please make sure the following items are included with your LED Display.

If any items are missing, contact your dealer.

Contact a local dealer to buy optional items or extras.

Important Safety Precautions

Turning Power ON/OFF

1) POWER

Turns the LCD Display On/Off.

2) LED

Shows Power ON mode -- BLUE

Shows Power Saver mode by blinking RED.

Shows Power OFF mode -- RED.

3) SOURCE (INPUT)

Switches from PC mode to Video mode.

Changing the source is only allowed for external devices that are connected to the LCD Display

at the time.

4) IR Sensor

Aim the remote control towards this spot on the LCD Display.

Components List

Manual :

Cables :

Others :

Option :

Remote Control

Pen Tray(AHA-P300) Pen Tray(AHA-P400)

Battery(CR-2025x1, 3V) PEN x2

USB For TouchRGB

Setup Manual Operation Manual(CD)

LED Display

Power Cable

1 2 3 4

x14

This display is designed for indoor use in a landscape orientation, and to be mounted with a bracket meeting

VESA specifications. Brackets capable of supporting at least 100 kg must be used. Mounting the monitor

requires the work of a trained AV professional and AHA cannot be held accountable for accidents or injuries

due to improper mounting.

For Child Safety

- If mounting the display using the provided support feet, insure that they are bolted to the

surface holding the display and that the furniture is properly secured

- Only use furniture that can support the weight of the display

- Do not allow the monitor or feet to hang over the edge of the supporting furniture.

- Do not place the monitor on furniture that could be utilized as steps, such as a cabinet

or chest of drawers.

- Route and secure cables so that they are not accessible by children.

Mount your display as described, yet be sure to follow the Safety Precautions as mentioned on page 2 and 3.

If you have been provided with a pen tray, follow the instructions below to mount it to the display. Remember

this add-on is designed to hold small writing tools and accessories used when operating the display. The pen

tray should never be used to store heavy objects, as a step, or as a ledge to hang materials from.

Find a suitable, a ventilated location to mount the display. Ensure that any cabinets or structures

surrounding the display meet the provided dimensions to allow for proper ventilation and operating

temperature.

Ensure that the wall, stand, mount, or other support is capable of supporting the 100 kg display. The

mount must be flat so that the display will operate perpendicularly to the floor. This display should never

be mounted and operated on its back.

The acceptable storage temperature range is -20℃~60℃. The acceptable operating temperature

range is 0℃~35℃. Ensure the mounting location does not exceed these ratings.

Ensure the location where the display will be mounted is out of direct sunlight.

In order to prevent malfunctions(touch sensor), we strongly recommed that do not place the halogen

Lamp in of interactive display.

If the display came with support feet attached, remove them by unscrewing their 4 bolts on the rear of

the display. Lift the display by its handles to remove the support feet from the bottom.

Attach your VESA compatible bracket to the rear of the display using the mounting holes shown in the

picture below.

Install the mounting brackets to the rear of the display using the screws provided.1.

Carefully lift and place the display by its handles into position on the bracket. Ensure that the display is

centered and angled to satisfaction.

Ensure that cables are securely attached and fixed. Make sure they are routed and stored so that they

will not be stepped on.

Connect the LED display’s power cord to the display and the appropriate electrical plug.

Turn the display on by pressing the Power button on the display or remote.

Using an RGB connection to display video from your computer:

- Connect the 15-pin RGB port on the back of your LED Display to the 15 pin RGB port on the

computer. To make this connection you should use an RGB cable with male adapters on both ends.

Using an HDMI connection to display video from your computer:

- Connect the HDMI cable from your computer’s HDMI port to the display’s HDMI port.

To make this connection, you should use an HDMI cable with male adapters on both ends.

Using the USB (TOUCH) connector on the PC USB terminal:

If you want to use your display’s touch sensing capability, you must connect a USB cable from the

display to your computer or device. You must use a USB cable with both A and B type adapters. B type

will attach to the rear of the display, and A type will attach to your computer.

Mounting the Display

Connection

Specification

Mounting the Pen Tray (Option)

5cm

25cm

10cm

(VESA Mounting Demension 600x400)

Align the pen tray above the brackets so that its threaded tracks line up

to the brackets’ holes. Ensure that the pen tray is centered with the

display. Install the eight holding screws from underneath the pen tray.

Connecting a Computer

15 Pin RGB connector HDMI connector USB (type A/B)

AC IN

RGB

HDMI

USB For Touch

Model

Power Supply Voltage

Power Consumption

Operating Temperature

Touch Detection method

Effective screen size(mm)

Overall dimensions (with stand) mm

Overall dimensions (without stand) mm

Weight

Operating humidity

CSLED-84

AC100 - 240V, 50/60Hz, 4.4/1.9A

150 ~ 430W

0℃ ~ +35℃

Optical image sensor system

1,860.48(W) x 1,046.52(H)

1,974(W) x 1,243(H) x 280(D)

1,974(W) x 1,160(H) x 101(D)

Approx. 95Kg

20% to 80% (no condensation)

[email protected]

Customer support call center : +82 31-997-0909

http://www.ahatouch.com

Headquarter and 1st factory

3011, Hakwoon-Ri Yangchon-meyon, Kimpo-City, Kyounggi-do, 415-843, Korea

2nd factory

#301 Ka-dong Techno-Zone, 2979, Hakwoon-Ri Yangchon-meyon, Kimpo-City, Kyounggi-do, 415-843, Korea

3rd factory

#510-5, Daekok-Dong, Seo-Ku, Incheon City, 404-280 Korea

Pen Tray(AHA-P300)

Pen Tray(AHA-P400)

- 6 - - 8 -

- 5 - - 7 -

How to insert the battery

Insert the battery with the polarities

facing as shown. + facing the

bottom of the remote and – facing

upwards.

Remote Control

COMPONENT(Option)

AV(Option)

S-VIDEO(Option)

SCART(Option)

HDMI 1

HDMI 2

HDMI 3

HDMI 1

HDMI 2

HDMI 3

Hot Key

Select Input Source

Turns the LCD Display ON and OFF

SLEEP

NUMBER KEY(Not Used)

STEREO

MONO

FREEZE

EXIT

PICTURE MODE

Dynamic

Standard

Mild

Game

User

SOUND MODE

Flat

Music

Movie

Speech

User

ASPECT

16:9

4:3

CURRENT INFORMATION

INPUT

POWER

PC HDMI

COMP.

VOL+

VOL-

EXIT

FREEZE MUTE STEREO SLEEP

PSM

1 2 3 4

5 6 7 8

9 0

SSM ASPECT

MENU INFO

SOURCE

설치환경에 따라 제품의 평탄도가 맞지않으면 터치센서 작동오류가 발생하오니 이때는 동봉된 CD의

Flatness checking.exe 파일을 실행하고 화면의 지시처럼 점멸하는 화살표 방향에 괴임목으로 받쳐줍니다.

<그림과 같이 제품 하단부에 괴임목을 받쳐 넣어 반드시 OK라는 글자가 화면에 표시되도록 조절해야 합니다>

센서가 전부 OK 일때 제품 중앙에 OK 표시.화살표 없음.

센서가 아래 그림일 경우 화면 우측 하단에 화살표 점멸

센서가 아래 그림일 경우 화면 좌측 하단에 화살표 점멸

센서가 아래 그림일 경우 화면 우측 하단에 화살표 점멸

상기 이외의 경우도 같은 방법으로 화살표 표시

센서가 아래 그림일 경우 화면 좌측 하단에 화살표 점멸

제품 설치시 평탄도 조정 방법

AHA CSLED-84 Setup Manual

Brand: AHA

Model: CSLED-84

Category: Supplementary music equipment

Type: Setup Manual

Download PDF

report

AHA CSLED-84 Setup Manual

AHA CSLED-84 Setup Manual

Related papers

Other documents