AWS BS-100, BS-250 User manual

  • Hello! I am an AI chatbot trained to assist you with the AWS BS-100 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
American Weigh Scales
BS-100 (100x0.01g)
BS-250 (250x0.1g)
User Manual
BS-Series
Copyright © 2010 American Weigh Scales, Inc.
All rights reserved. Rev. 2.0
BS-Series Manual
ThankyouforpurchasingtheAmericanWeigh
BS-Seriesdigitalpocketscale.Pleasereadalloperating
instructionscarefullybeforeuse.Scalesareprecision
measuringdevicesandshouldalwaysbehandledwith
propercare.Toensureyearsofreliableservice,keepthese
simpletipsinmind:
• Donotexceedthescale’smaximumcapacity.
Overloadingyourscalecanpermanentlydamageit!
• Avoidexposuretoextremeheatorcold.Scales
performbestatnormalroomtemperature.If
temperatureshavechangeddramatically,calibration
andadjustmentmaybenecessary.
• Allowyourscaletowarmupfor30-60secondsbefore
performingcalibration(ifavailable).
• Storeyourscaleinaclean,drylocation.Dust,dirt,
andmoisturecanaccumulateontheweighing
sensorsandelectronicscausinginaccuracyor
malfunction.
• Avoidusingyourscaleincloseproximitytostrong
radiowaveemittingdevicessuchascomputers,cash
registers,andcordlessphones.
• Alwaysweighonaatandlevelsurface,freefrom
vibrationsanddrafts.Thecornerofaroomisusually
themoststable.
• Gentlyapplyallitemstobeweighed.Donotdrop
itemsontotheweighingplatform.
• Avoiddroppingyourscale.Thewarrantydoesnot
coverdamageduetoroughtreatmentoroverload.
• Checkthebatteriesrstifyouarehavinganytrouble
withyourscale.Thissimplestepcanremedymost
scaleissues.
• Donotdisassembleyourscale.Thisproductcontains
nouserserviceableparts.
AMW-BS100
I. Part List
1. Scale
2.
WeighingTray
3. AAABatteries(x2)
II. Key Description
III. Battery Installation
1.
Beforeusingthescaleforthersttime,check
thebatterycompartmentandremoveanyplastic
insulationstripsorpackagingthatmaybeinplaceto
preventbatterydrainageduringshipping/storage.
2. Ifyouarereplacingthebatteries,makesurethe
positiveandnegativecontactsareproperlyaligned.
ON/OFF Key
Mode Key
Tare Key
Count Key
BS-Series Manual
IV. Operation
1.
Placethescaleonaat,levelsurfaceandpressthe
I/Okeytoturnthescaleon.
2. Oncethestart-upprocesscompletesandthescale
goestozeroyouarereadytoweigh.
3. Placethequantitytobeweighedontotheweighing
platform.
4. Waitacouplesecondsforthedisplaytostabilize
beforetakingaweightreading.
V. Changing the Unit of Measure
1.
PresstheMkeytochangethescalesdisplayedunit
ofmeasure.
2. Ifthescaleisturnedoffthenbackon,itwilldefault
tothelastunitused.
BS-100 Units:g(gram) dwt(pennyweight) ct
(carat) gn(grain)
BS-250 Units:g(gram) oz(ounce) ozt(troy
ounce) dwt(pennyweight)
VI. Using the Tare Feature
Youcanusethisscale’starefeaturetosubtracttheweight
ofanemptycontainerorvesselfornetweightdetermination.
NOTE:Theweightofthecontainerwillsubtractfromthe
availablecapacity.
1. Placetheemptycontainerorvesselontheweighing
platform.
2. PresstheTkeyonce.Thedisplaywillthenresetto
zero.Ifthecontainerisremoved,it’sweightwillbe
displayedasanegativenumber.
3. Youmaynowllthecontainerwiththequantityto
beweighed.Thedisplaywillshowthenetweightof
thecontents.
4. Toreturntonormalweightdisplay(grossweight),
removeanyitemsfromtheweighingplatformand
pressthe Tkeyagaintore-zerothescale.
VII. Using the Counting Feature
1.
PresstheI/Okeytoturnthescaleon.
2. Placeasamplequantityoftheitemsbeingweighed
ontheplatform.Thisquantityshouldeitherbe25,
50,75,or100pieces.
3. Oncetheweightisstable,pressandholdtheCkey
toentercountingmodesetup.
4. Thecurrentsamplesizewillbedisplayedonthe
LCD(ie.“25”).
5. PresstheM keytochangeitbetween25,50,75,
or100andpressCtoconrm.Thecountwillbe
displayedontheLCD.Youmaynowaddmore
items.Asitemsareremoveitemsandthecountwill
updateautomatically.
VIII. Calibration
Calibrationandadjustmentareperformedatthefactory.
However,theweighingrangecanshiftslightlyduring
shipping.Also,duetochangesinlocalaccelerationofgravity
aroundtheworld,adjustmentisrecommendedwhenmoving
thescalefromonelocationtoanother.Tocheckcalibration:
1. Placetherequiredcalibrationweightonthescale
andnotethedisplayedvalue.
2. Ifthedisplayedvalueisnotwithinacceptable
tolerance(seechartonnextpage),adjustmentis
required.
BS-Series Manual
Model Acceptable
Tolerance(±)
Calibration
Weight
Recommended
AccuracyClass
BS-100 0.02g 100g OIMLM2
BS-250 0.2g 200g OIMLM2
IX. Adjustment
1.
PressandholdtheMkeyuntilthedisplayshows
“CAL”.
2.
PresstheMkeyagain.Thedisplaywillash“CAL”
followedbythecalibrationweightvalue(seechart).
3. Placethecalibrationweightonthecenterofthe
weighingplatform.Makesureyouareusingthe
correctweightforyourspecicmodel.
4. Oncetheweightisaccepted,thedisplaywillshow
“PASS”thenreturntonormaloperation.
X. Troubleshooting
•
Problem:Scalewillnotturnon
• Solution: Checkthebatteries
• Problem: Displayedweightuctuatesrandomly
• Solution: Makesureyourworkspaceisstableand
freeofanyaircurrentsorvibration
• Problem:Displayedweightisinaccurate
• Solution:Performacalibrationadjustment
XI. Error Codes
1. OUTZ-Zerorangehasshifted.Performcalibration
adjustment.Iftheproblempersists,theloadcellmay
bepermanentlydamagedduetooverloading.
2. EEEEE-Maximumcapacityexceeded.Removethe
extraweighttoavoiddamagingtheloadcell.
3. LLLLL -Loadcellhasbeenoverloaded.
4. UNST-Thescaleisunstable.Usethescaleina
morestableposition
XII. Specications
BS-100 BS-250
Max.Capacity 100g 250g
Readability 0.01g 0.1g
Power
2xAAA
Dimensions 2.8x4.3x0.8in.
PlatformDimensions 1.8x2.6in.
Warranty 10YearLimitedWarranty
BS-100 Capacity Readability
Gram 100g 0.01g
Pennyweight 64.30dwt 0.01dwt
Carat 500ct 0.05ct
Grain 1543gn 0.2gn
BS-250 Capacity Readability
Gram 250g 0.1g
Ounce 8.820oz 0.01oz
TroyOunce 8.038ozt 0.01ozt
Pennyweight 160.8dwt 0.1dwt
/