MK-1GD
2
MK-DH
2
D
M
1
3
2
4 Wiring distance 4 Wiring distance 4 Wiring distance 4 Wiring distance 4 Wiring distance
65cm
2'1"
150cm
5"
50cm
20"
50cm / 20"
MK-DH
95cm / 3'1"
185cm
6'1"
205cm
6'10"
140cm
4'7"
120cm
3'11"
1.0mm
200m
D M
18AWG
650'
MK-1GD
MK-DH
q
w
2
INSTALLATION INSTALLATION INSTALLATION INSTALLATION INSTALLATION
3
a
b
c
65cm
2'1"
1 Mounting locations
Video door station
Do not mount video door station in
such places as standing location is
strongly backlit.
a.under direct sunlight
b.under street light or porch light
c.at doorway covered, but backlit
strongly
2 Image view area
q
View from the initial camera
position.
wPull down lever to turn the
camera up.
1 Mounting locations
Video door station
Do not mount video door station in
such places as standing location is
strongly backlit.
a.under direct sunlight
b.under street light or porch light
c.at doorway covered, but backlit
strongly
2 Image view area
q
View from the initial camera
position.
wPull down lever to turn the
camera up.
1 Mounting locations
Video door station
Do not mount video door station in
such places as standing location is
strongly backlit.
a.under direct sunlight
b.under street light or porch light
c.at doorway covered, but backlit
strongly
2 Image view area
q
View from the initial camera
position.
wPull down lever to turn the
camera up.
1 Mounting locations
Video door station
Do not mount video door station in
such places as standing location is
strongly backlit.
a.under direct sunlight
b.under street light or porch light
c.at doorway covered, but backlit
strongly
2 Image view area
q
View from the initial camera
position.
wPull down lever to turn the
camera up.
1 Mounting locations
Video door station
Do not mount video door station in
such places as standing location is
strongly backlit.
a.under direct sunlight
b.under street light or porch light
c.at doorway covered, but backlit
strongly
2 Image view area
q
View from the initial camera
position.
wPull down lever to turn the
camera up.
3 Cable
1.Parallel cable or single-sheathed
cable are recommended. Vinyl
jacket, PE(polyethylene)
insulation cable is recommended.
2.Never use loose wires, twisted
pair cable or coaxial cable.
3 Cable
1.Parallel cable or single-sheathed
cable are recommended. Vinyl
jacket, PE(polyethylene)
insulation cable is recommended.
2.Never use loose wires, twisted
pair cable or coaxial cable.
3 Cable
1.Parallel cable or single-sheathed
cable are recommended. Vinyl
jacket, PE(polyethylene)
insulation cable is recommended.
2.Never use loose wires, twisted
pair cable or coaxial cable.
3 Cable
1.Parallel cable or single-sheathed
cable are recommended. Vinyl
jacket, PE(polyethylene)
insulation cable is recommended.
2.Never use loose wires, twisted
pair cable or coaxial cable.
3 Cable
1.Parallel cable or single-sheathed
cable are recommended. Vinyl
jacket, PE(polyethylene)
insulation cable is recommended.
2.Never use loose wires, twisted
pair cable or coaxial cable.
MOUNTING & WIRING MOUNTING & WIRING MOUNTING & WIRING MOUNTING & WIRING MOUNTING & WIRING
MK-DH
MK-1GD
q
w
83.5mm
(3-5/16")
4
TECHNICAL
PRECAUTIONS
TECHNICAL
PRECAUTIONS
TECHNICAL
PRECAUTIONS
TECHNICAL
PRECAUTIONS
TECHNICAL
PRECAUTIONS
5
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
•Operating temperature
MK-DH: -10˚C ~ +60˚C
(+14˚F ~ +140˚F).
•Cleaning: Clean the unit with a
soft cloth and neutral
household cleaner. Do not use
any abrasive cleaner or cloth.
• Camera unit: CCD camera.
• Scanning line: 525lines.
• Minimum illumination: 1 Lux or
loss at same distance.
• Dimensions:
130H x 98W x 37.5D (mm).
5-1/8"H x 3-7/8"W x 1-1/2"D
• Weight: 230g (0.51lbs).
• Camera unit: CCD camera.
• Scanning line: 525lines.
• Minimum illumination: 1 Lux or
loss at same distance.
• Dimensions:
130H x 98W x 37.5D (mm).
• Weight: 230g.
• Camera unit: CCD camera.
• Scanning line: 525lines.
• Minimum illumination: 1 Lux or
loss at same distance.
• Dimensions:
130H x 98W x 37.5D (mm).
• Weight: 230g.
• Camera unit: CCD camera.
• Scanning line: 525lines.
• Minimum illumination: 1 Lux or
loss at same distance.
• Dimensions:
130H x 98W x 37.5D (mm).
• Weight: 230g.
• Camera unit: CCD camera.
• Scanning line: 525lines.
• Minimum illumination: 1 Lux or
loss at same distance.
• Dimensions:
130H x 98W x 37.5D (mm).
• Weight: 230g.
•Operating temperature
MK-DH: -10˚C ~ +60˚C.
•Cleaning: Clean the unit with a
soft cloth and neutral
household cleaner. Do not use
any abrasive cleaner or cloth.
•Operating temperature
MK-DH: -10˚C ~ +60˚C.
•Cleaning: Clean the unit with a
soft cloth and neutral
household cleaner. Do not use
any abrasive cleaner or cloth.
•Operating temperature
MK-DH: -10˚C ~ +60˚C.
•Cleaning: Clean the unit with a
soft cloth and neutral
household cleaner. Do not use
any abrasive cleaner or cloth.
•Operating temperature
MK-DH: -10˚C ~ +60˚C.
•Cleaning: Clean the unit with a
soft cloth and neutral
household cleaner. Do not use
any abrasive cleaner or cloth.
DC18V
RELEASE
DOOR
SUB
CALL EXT
-
L L
A1 A2
B1 B2
S S
+
MK-DH
A1
A2
2
MK-DH
NP
NP: Non-polarized. P: Polarized.
NP: Non-polarized. P: Polarized.
NP: Non-polarized. P: Polarized.
NP: Non-polarized. P: Polarized.
NP: Non-polarized. P: Polarized.
2
18V DC
-
+
P
- 2 - - 3 -
e
q Screw (X 2)
w Single-gang box
e Water escape hole
Do not apply caulking seals,
etc. around door station.
MK-DH Terminals
(A1, A2) to master station MK-1GD
q Screw (X 2)
w Single-gang box
e Water escape hole
Do not apply caulking seals,
etc. around door station.
MK-DH Terminals
(A1, A2) to master station MK-1GD
q Screw (X 2)
w Single-gang box
e Water escape hole
Do not apply caulking seals,
etc. around door station.
MK-DH Terminals
(A1, A2) to master station MK-1GD
q Screw (X 2)
w Single-gang box
e Water escape hole
Do not apply caulking seals,
etc. around door station.
MK-DH Terminals
(A1, A2) to master station MK-1GD
q Screw (X 2)
w Single-gang box
e Water escape hole
Do not apply caulking seals,
etc. around door station.
MK-DH Terminals
(A1, A2) to master station MK-1GD