3
Turn on your Monster® Soundstage™ by pressing down on
the power switch for 5 seconds. Monster® Soundstage™
must be on to set up your initial connection.
Note: The SoundStage™ takes up to a minute to start up
after turning power on. The power LED will alternate
between red and blue while the unit is starting up. When
the SoundStage is ready to connect and play, the LED will
glow solid blue.
Dieline Blade Speaker Small
Units: mm Scale: 1:1
Date: 05/23/2014
Version 6
Dieline Blade Speaker Medium
Units: mm Scale: 1:1
Date: 05/23/2014
Version 6
WiFi
This is the default input. Unless you choose another input,
the unit will play your WiFi source.
1. Download the Monster® Soundstage™ App.
2. Go to your smartphone WiFi settings and connect
directly to the speaker you wish to add.
3) Input Set Up
There are four ways to connect your Monster® Soundstage™
speaker to your music sources:
• WiFi (see page 3)
• Bluetooth® wireless communication (see page 5)
• Digital Toslink (see page 6)
• Analog 3.5mm (see page 6)
1
2
3
4
Dieline Blade Speaker Small
Units: mm Scale: 1:1
Date: 05/23/2014
Version 6
Dieline Blade Speaker Medium
Units: mm Scale: 1:1
Date: 05/23/2014
Version 6
Dieline Blade Speaker Small
Units: mm Scale: 1:1
Date: 05/23/2014
Version 6
Dieline Blade Speaker Medium
Units: mm Scale: 1:1
Date: 05/23/2014
Version 6