Intermec G4000 Supplementary Manual

Placing Feet on the Intermec Application Server

To protect your desktop from scratches, place the four self-adhesive feet

on the bottom of your Intermec Application Server.

Note: If you plan to mount the Intermec Application Server

in a rack, do not attach the feet.

To attach the feet

1 Remove the backing from the feet.

2 Place the feet on the bottom corners of the Intermec Application

Server. Place the feet as close to the outside corners as possible.

Self-adhesive foot

(4 places)

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel 425.348.2600

fax 425.355.9551

www.intermec.com

2005 Intermec Technologies

Placing Feet on the Intermec Application Server

*072320-002*

P/N 072320-002