Contec BX-T1020 Owner's manual

IPC Series

BOX-PC

for BX-T1000 Series

User’s Manual

CONTEC CO., LTD.

BX-T1000 Series User’s manual

i

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing items,

contact your retailer.

Product Configuration List

BX-T10x0-NA02

[Base Model]

BX-T10x0-xxxxxxxxx *1

[OS Pre-install Model]

Name

Pcs.

BOX-PC

1

Attachment fitting

2

Displayport retention fitting

1

Screws for 2.5inches HDD (M3 x 4)

8

Washer assembled screw (M3 x 8, black)

7

Washer assembled and cross recessed

hexagonal bolt (M4 x 10, black)

6 6

Power supply

connector complete set

Power connector

1

Contact

4

Cable Clamp for USB

1

Cable Clamp for Displayport

1

Product Guide (booklet)

1

IPC Precaution List

1

Warranty Certificate

1

Serial Number Label

1

Royalty Consent Contract (OS)

None *2

1

Setup Procedure Document

None *2

1

Recovery Media

None *2

1

*1 Except for base model.

*2 It is not packed to the OS uninstall model.

* The user's manual for this product is available as a PDF file through CONTEC

’

s Web site.

The user's manual provides such information as hardware settings, functions for each component, and BIOS settings.

Refer to it as necessary.

ii

BX-T1000 Series User’s manual

Product Configuration Image

* See the Product Configuration List to check if all the components are included for the specified number of units.

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document.

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft

and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks

of their respective holder.

BOX-PC

Attachment fittin

g Displayport

retention fitting

Cable Clamp

for Displayport

Cable Clamp

for USB

Power Connector Contact

Royalty

Consent Contract

Serial Number

Label

Setup

Procedure

Document

Recovery

Media

IPC

Precaution List

Screws for

2.5inches HDD

(M3 x 4)

Washer assembled screw

(M3 x 8, black)

Washer assembled

and

cross recessed hexagonal bolt

(M4 x 10, black)

Product Guide

Product

Guide

IPC

Precaution List

Warranty

Certificate

Warranty

Certificate

Royalty

Consent

Contract

Setup

Procedure

Document

BX-T1000 Series User’s manual

iii

Table of Contents

Check your package ............................................................................................................................. i

Copyright ............................................................................................................................................ ii

Trademarks .......................................................................................................................................... ii

Table of Contents ............................................................................................................................... iii

1. INTRODUCTION 1

About the Product ............................................................................................................................... 1

Features ........................................................................................................................................ 3

Supported OS ............................................................................................................................... 3

Customer Support................................................................................................................................ 4

Web Site ....................................................................................................................................... 4

How to Obtain Service ........................................................................................................................ 4

Liability ............................................................................................................................................... 4

Safety Precautions ............................................................................................................................... 5

Safety Information ....................................................................................................................... 5

Caution on the BX-T1000 Series ................................................................................................. 5

Security Warning ................................................................................................................................ 8

2. SYSTEM REFERENCE 9

Specifications ...................................................................................................................................... 9

Power Management Features ............................................................................................................ 11

Power Requirements ......................................................................................................................... 12

Power Consumption ................................................................................................................... 12

Physical Dimensions ......................................................................................................................... 13

3. HARDWARE SETUP 15

Before Using the Product for the First Time ..................................................................................... 15

Hardware Setup ................................................................................................................................. 16

Installing the Hard Disk ............................................................................................................. 16

Attaching the Attachment Fittings ............................................................................................. 18

Attaching the FG ........................................................................................................................ 19

Fastening the Cable .................................................................................................................... 20

Installation Requirements ........................................................................................................... 21

4. BIOS SETUP 25

Introduction ....................................................................................................................................... 25

Starting Setup .................................................................................................................................... 25

Using Setup ....................................................................................................................................... 26

iv

BX-T1000 Series User’s manual

Getting Help ............................................................................................................................... 26

In Case of Problems ................................................................................................................... 26

A Final Note About Setup .......................................................................................................... 26

Main Menu ........................................................................................................................................ 27

Setup Items ................................................................................................................................. 27

Main .................................................................................................................................................. 28

Advanced ........................................................................................................................................... 29

CPU Settings .............................................................................................................................. 31

Power & Performance ................................................................................................................ 32

SATA Configuration .................................................................................................................. 35

PCH-FW Configuration ............................................................................................................. 36

Intel (R) I210 Gigabit Network Connection ............................................................................... 38

Intel(R) Rapid Storage Technology............................................................................................ 39

ACPI Settings ............................................................................................................................. 42

RAS Configuration ..................................................................................................................... 44

SMART Settings ........................................................................................................................ 46

Super IO Configuration .............................................................................................................. 47

H/W Monitor .............................................................................................................................. 48

Network Stack Configuration ..................................................................................................... 49

CSM Configuration .................................................................................................................... 50

USB Configuration ..................................................................................................................... 51

Chipset............................................................................................................................................... 53

System Agent Configuration ...................................................................................................... 54

PCH-IO Configuration ............................................................................................................... 55

Security ............................................................................................................................................. 56

Secure Boot menu ............................................................................................................................. 57

Boot Configuration ............................................................................................................................ 58

Save & Exit ....................................................................................................................................... 59

CONTEC Utility ............................................................................................................................... 61

5. SOFTWARE RAID SETUP 67

Create RAID Volume (RAID1(Mirror)) ........................................................................................... 68

Setup ........................................................................................................................................... 68

Create RAID volume .................................................................................................................. 69

Delete RAID Volume (RAID1(Mirror)) ........................................................................................... 73

RAID setup when replacing SATA disk ........................................................................................... 76

6. EACH COMPONENT FUNCTION 79

Component Name .............................................................................................................................. 79

Front View.................................................................................................................................. 79

Component Function ......................................................................................................................... 80

LED: POWER, ACCESS, STATUS .......................................................................................... 80

BX-T1000 Series User’s manual

v

DC Power Input Connector: DC-IN ........................................................................................... 80

POWER SW ............................................................................................................................... 81

LINE IN Interface: LINE IN ...................................................................................................... 81

LINE OUT Interface: LINE OUT .............................................................................................. 81

MIC IN Interface: MIC IN ......................................................................................................... 81

Serial-ATA : SATA 1, SATA 2 ................................................................................................. 82

Giga bit-Ethernet: LAN A, B ..................................................................................................... 83

USB3.0 Port: USB3.0................................................................................................................. 84

USB2.0 Port: USB2.0................................................................................................................. 84

Serial Port Interface: SERIAL A, B ........................................................................................... 85

DVI Interface: DVI-D ................................................................................................................ 86

Display port Interface: Display port ........................................................................................... 87

7. APPENDIX 89

POST Codes ...................................................................................................................................... 89

SERIAL I/O Address and Register Function .................................................................................... 92

Watch-Dog-Timer ............................................................................................................................. 98

Battery ............................................................................................................................................... 99

Life of SSD ..................................................................................................................................... 100

8. LIST OF OPTIONAL PRODUCTS 101

vi

BX-T1000 Series User’s manual

1. Introduction

BX-T1000 Series User’s manual

1

1.

Introduction

About the Product

This product is a fanless and high-performance embedded type computer with the seventh-generation

Intel

®

CPU processor for industrial applications. Achieving great performances and power saving, it also

contains rich interfaces, and realizes total natural cool down (FAN-less).

CPU processor can be chosen from Core i7 7600U, Core i5 7300U, or Celeron 3965U.

It has extension interfaces such as dual-LAN, USB3.0, Displayport, DVI-D, and RS-232C. It employs

slot-in type of 2.5-inch SATA disk slots, providing the appropriate ability to display images including

digital signage.

Embedded-type CPU has been adopted. The use of readily available parts ensures the product to be

applied easily. In addition, Contec-customized BIOS allows support to be provided at the BIOS level.

This product is available in the following models:

- Base model with Intel Core i7 Processor 7600U 2.80GHz

BX-T1000-NA02 (Memory 8GB, without OS, without storage devices)

- Base model with Intel Core i5 7300U 2.60GHz

BX-T1010-NA02 (Memory 8GB, without OS, without storage devices)

- Base model with Intel Celeron 3965U 2.20GHz

BX-T1020-NA02 (Memory 8GB, without OS, without storage devices)

- OS-installed model with Intel Core i7 Processor 7600U 2.80GHz

BX-T1000-W10M02H07 (Memory 8GB, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), 2.5 inch HDD 100GB)

BX-T1000-W10M02M08 (Memory 8GB, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), 2.5 inch SSD (MLC) 256GB)

BX-T1000-W19M02H07 (Memory 8GB, Windows 10 IoT Enterprise 2019 LTSC 64bit

(Japanese, English, Chinese, Korean), 2.5 inch HDD 100GB)

BX-T1000-W19M02M08 (Memory 8GB, Windows 10 IoT Enterprise 2019 LTSC 64bit

(Japanese, English, Chinese, Korean), 2.5 inch SSD (MLC) 256GB)

- OS-installed model with Intel Core i5 7300U 2.60GHz

BX-T1010-W19M02H07 (Memory 8GB, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), 2.5 inch HDD 100GB)

BX-T1010-W19M02M08 (Memory 8GB, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), 2.5 inch SSD (MLC) 256GB)

1. Introduction

2

BX-T1000 Series User’s manual

- OS-installed model with Intel Celeron 3965U 2.20GHz

BX-T1020-W19M02H07 (Memory 8GB, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), 2.5 inch HDD 100GB)

BX-T1020-W19M02M08 (Memory 8GB, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), 2.5 inch SSD (MLC) 256GB)

1. Introduction

BX-T1000 Series User’s manual

3

Features

- Seventh-generation Core i7, Core i5, Celeron processor adopted

This product adopts the CPU that saves power consumption and also provides high computing and

graphic performances. Embedded-type CPU makes the stable supply possible.

- Fan-less design reduces maintenance work

The product is fanless to ensure a totally spindleless design that simplifies maintenance, relieving the

concern about dust or foreign matter to get into the product. Moreover, along with minimized use of

degrading parts greatly reduce maintenance work.

- A wide range of power supplies (10.8 - 31.2VDC) supported

As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power

environments. The separately available AC adapter adds support for 100 - 240VAC power.

- Major types of peripherals are supported with rich interfaces

It has a variety of extended interface such as DVI-D x 1, Displayport×1, 1000BASE-T x 2, USB3.0 x 4,

USB2.0 x 2, and serial (RS-232C) x 2.

It has two slot-in type of 2.5-inch SATA disk slots, providing the ability to separate data from the

operating system, as well as the convenience of being able to use one slot for system startup and the other

for maintenance or for taking home system logs or collected data.

- With retention fitting and cable clamp to stay trouble-free

This product stays trouble-free, being equipped with cable clamp for connectors with no locking

mechanism, such as USB cable.

- Safety design required for embedded applications

For Windows 10 IoT Enterprise LTSB 2016 or Windows 10 IoT Enterprise 2019 LTSC installed model,

it is possible to use the WF*1 function of OS. It is designed for safety required for embedding purpose,

for example, prohibiting unwanted writing to the HDD or SSD with WF function will relieve the concern

about the writing limits to the HDD or SSD and prevent an unintentional system alteration.

*1 UWF (Unified Write Filter) is a function of Windows 10 IoT Enterprise LTSB 2016 or Windows 10 IoT Enterprise 2019 LTSC. They

protect the disk from being actually written by redirecting the writing to RAM.

Supported OS

- Windows 10 IoT Enterprise LTSB 2016 64bit or Windows 10 IoT Enterprise 2019 LTSC (Japanese,

English, Chinese, and Korean)

1. Introduction

4

BX-T1000 Series User’s manual

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently and

comfortably.

Web Site

https: //www.contec.com/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be

liable for any incidental or consequential damages due to such defect or consequences that arise from

inexperienced usage, misuse, or malfunction of this device.

1. Introduction

BX-T1000 Series User’s manual

5

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting in

injury or death and the destruction of equipment and resources. Understand the meanings of these labels

to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Caution on the BX-T1000 Series

Handling Precautions

- Always check that the power supply is turned off before connecting or disconnecting power cables.

- Do not modify the product.

- Always turn off the power before inserting or removing circuit boards or cables.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

- If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

- Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.

- For battery replacement, contact your retailer as it must be performed as a process of repair.

- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances. For details on replacing the battery, refer to the appendix.

DANGER

WARNING

CA

U

TI

ON

W

ARNING

1. Introduction

6

BX-T1000 Series User’s manual

- Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product

must be used in such an environment, install it on a dust-proof control panel, for example.

- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of

specification.

- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

- Do not use or store this product in the presence of chemicals.

- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

- This product’s case may become hot. To avoid being burned, do not touch that section while this

product is in operation or immediately after turning off the power. Avoid installation in a location

where people may come into contact with that section.

- CONTEC does not provide any guarantee for the integrity of data on SSD/HDD.

- Always remove the power cable from the power outlet before mounting or removing an expansion

board and before connecting or disconnecting a connector.

- Always remove the power cable from the power outlet before connecting or disconnecting a

connector.

- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector

is less than 2 kgf·cm.

- To prevent corruption of files, always shutdown the OS before turning off this product.

- CONTEC reserves the right to refuse to service a product modified by the user.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

- To connect with peripherals, use a grounded, shielded cable.

- SATA disk slot is not hot-swappable. Do not insert or remove the SATA disk while the product

power is on. It may result in malfunctions or system damages.

- Component Life:

(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.

The backup time at a temperature of 25°C with the power disconnected is 10 years or

more.

(2) SSD ---SSD is used for the OS storage area with the SSD model.

The estimated failure rate is 1 every 3,000 rewrites for MLC models.

For details, refer to “Life of SSD” in the Appendix.

(3) HDD ---HDD is used for the OS storage area with the HDD model.

The estimated failure rate is, with the conditions described below,

20,000 hours (Power on hours) or 5 years, whichever comes first.

Power on hours: Less than 333 hours/month

Operating: Less than 20% of power on hour

* Replacement of expendables is handled as a repair (there will be a charge).

* The service life for consumable parts are reference values and are not guaranteed values.

CAUTION

1. Introduction

BX-T1000 Series User’s manual

7

FCC PART15 Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

NOTE

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

1. Introduction

8

BX-T1000 Series User’s manual

Security Warning

When connecting to the network, be aware of security-related problems. See the examples of Security

measures below and set up the product properly along with the network devices.

[Information security risks]

- Unauthorized access from the outside through a network could cause the system halt, data damage, or

exposure to malware

*1

.

- Invaded and used as a stepping stone, a device might attack the others through networks.

(a victim becomes an assailant)

- Information might leak without realizing due to the connection to the network.

- Secondary damages such as harmful rumors, liability in damages, social credibility fall, and opportunity

loss are expected led by the troubles described above.

*1… Malware (Malicious Software) is software that brings harm to a computer system and performs unintended operations.

[Security measures - e.g.]

- Do not keep using the default password. (Refer to the product manual for the password setting).

- Set a strong password.

⇒Combined with upper and lowercase letters, and numbers so that it cannot be easily analogized

by others.

- Change the password periodically.

- Disable unnecessary network services and functions.

- Restrict access to the network with network devices.

*2

- Restrict ports to be released on the network with network devices.

- Create a closed network connection using such as dedicated network or VPN

*3

.

*2…Inquire for setting procedure to manufacturers.

*3…VPN (Virtual Private Network): a secured network that wards off unauthorized access by protecting the communication path with

authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole that are

endlessly found day and night. Please understand that risks are always involved with the Internet

connection, and we strongly recommend a user should constantly update information security measures.

2. System Reference

BX-T1000 Series User’s manual

9

2.

System Reference

Specifications

Table 2.1. Functional Specifications < 1 / 2 >

Model

BX-T1000- xxxxxxxxx

BX-T1010-xxxxxxxxx

BX-T1020-xxxxxxxxx

CPU

Intel

®

Core™ i7 Processor

7600U (2.80GHz)

Intel® Core™ i5 Processor

7300U (2.60GHz)

Intel® Celeron Processor

3965U (2.20GHz)

BIOS BIOS (mfd. by AMI)

Memory

8GB (260- pin SO-DIMM), PC4-17000 (DDR4-2133)

Graphic Intel® HD Graphics 620 (built-in CPU)

Intel® HD Graphics 610

(built-in CPU)

System

resolution

DVI-D

800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x800, 1,280x960,

1,280x1,024, 1,360x768, 1,366x768, 1,400x10,50, 1,440x900, 1,600x900,

1,600x1,200, 1,920x1,080, 1,920x1,200 (16,770,000 colors)

Displayport

800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x800, 1,280x960,

1,280x1,024, 1,360x768, 1,366x768, 1,400x10,50, 1,440x900, 1,600x900,

1,600x1,200, 1,680x1,050, 1,790x1,344, 1,856x1,392,1,920x1,080, 1,920x1,200,

1,920x1,440, 2,048x1,152, 2,048x1,536, 2,560x1,440, 2,560x1,600, 2,560x1,920,

2,560x2,048, 3,840x2,160 (16,770,000 colors)

Audio HD Audio compliant, LINE OUT x 1, LINE IN x 1, MIC IN x 1

SATA

Slot-in 2.5 inches SATA hard disk x 2 Serial ATA 3.0 compliant support

BX-T10x0-NA02:-

BX-T10x0-W1xM02H07: Built-in SATA HDD (100GB, 1 partition) *1

BX-T10x0-W1xM02M08: Built-in SATA SSD (MLC) (256GB, 1 partition) *1

LAN

Intel I210IT Controller

1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)

USB

USB 3.0 compliant 4 port

USB 2.0 compliant 2 port

Serial I/F

RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male)

Baud rate : 50 - 115,200bps

Hardware monitoring Monitoring CPU temperature, power voltage

Watchdog timer

Software programmable ,255

level(1sec - 255sec)

Time up allows reset or shutdown.

RTC/CMOS

Lithium backup battery life: 10 years or more.

The real-time clock is accurate within ±3 minutes (at 25°C) per month

Power Management

Power management setup via BIOS, Power On by Ring / Wake On LAN,

Supports ACPI Power management

Secutity (TPM) TCG TPM2.0

*1: The capacity of HDD or SDD is a value when 1GB is calculated by 1 billion bytes. The capacity that can be

recognized from OS might be displayed fewer than an actual value.

2. System Reference

10

BX-T1000 Series User’s manual

Table 2.1. Functional Specification < 2 / 2 >

Model

BX-T1000- xxxxxxxxx

BX-T1010-xxxxxxxxx

BX-T1020-xxxxxxxxx

Interface

Display DVI-D x 1 (25pin DVI-D connector), Displayport x 1

Audio

LINE OUT : 3.5φ Stereo mini jack, Full-scale output level 1.2Vrms(Typ.)

LINE IN : 3.5φ Stereo mini jack, Full-scale output level 1.4Vrms(Typ.)

MIC IN : 3.5φ Stereo mini jack, Full-scale input level 1.4Vrms(Typ.)

Serial ATA slot

Slot-in 2.5 inches SATA hard disk x 2

LAN

2 port (RJ-45 connector)

USB

USB3.0 compliant 4port (TYPE-A connector)

USB2.0 compliant 2port (TYPE-A connector)

RS-232C 2 port (9pin D-SUB connector [male])

Power supply

Rated input voltage

12 - 24VDC *2

Range of input

voltage

10.8 - 31.2VDC

Power consumption

12V 5.2A, 24V 2.7A

12V 4.2A, 24V 2.2A 12V 4.1A, 24V 2.1A

External device

power

supply capacity

Serial ATA slot : +5V : 2A( 1,00mAx2)

USB3.0 I/F : +5V : 3.6A (900mAx4)

USB2.0 I/F : +5V : 1.0A (500mAx2)

Physical dimensions

(mm)

262 (W) x 180(D) x 49(H) (No protrusions)

Weight About 2.0kg (Excluding attachment fittings)

*2: Use a power cable shorter than 3m.

2. System Reference

BX-T1000 Series User’s manual

11

Table 2.2. Installation Environment Requirements

Model

BX-T10x0-xxxxxxxxx

Ambient

specifications

Operating temperature

0 - 55°C (With 1000BASE-T : 0 - 50°C), airflow 0.7m/s

0 - 45°C (With 1000BASE-T : 0 - 40°C), no airflow

Storage temperature

-10 - +60°C

Humidity

10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-noise

resistance

Line noise

AC line / ±2kV *3

Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)

Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

Sweep

resistance

When the HDD is on : 10 - 50Hz/ 0.5G

25 min. each in x, y, and z directions

(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)

When the HDD is off : 10 - 57Hz/semi-amplitude 0.15mm 57 - 150Hz/2.0G

40 min. each in x, y, and z directions

(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)

Impact resistance

10G, half-sine shock for 11 ms in x, y, and z directions

(JIS C 60068-2-27-compliant, IEC 60068-2-27-compliant)

Grounding

Class D grounding, SG-FG / continuity

Standard

VCCI Class A, FCC Class A,

CE Marking (EMC Directive Class A, RoHS Directive)

*3 : When AC adapter “ACAP12-06A” is used.

Power Management Features

- Support both ACPI (Advanced Configuration and Power Interface).

- ACPI v5.0 compliant

- Hardware automatic wake-up

2. System Reference

12

BX-T1000 Series User’s manual

Power Requirements

Your system requires a clean, steady power source for reliable performance of the high frequency CPU on

the product, the quality of the power supply is even more important. For the best performance makes sure

your power supply provides a range of 10.8 V minimum to 31.2 V maximum DC power source.

Power Consumption

For typical configurations, the CPU card is designed to operate with at least 84W power supply.

The power supply must meet the following requirements:

- Rise time for power supply: 2 ms - 30 ms

The following table lists the power supply’s tolerances for DC voltages:

Table 2.3. DC voltage tolerance

DC Voltage

Acceptable Tolerance

+ 12V - 24V

+ 10.8V - 31.2V

2. System Reference

BX-T1000 Series User’s manual

13

Physical Dimensions

Figure 2.1. Physical Dimensions (With the bundled attachment fittings)

Figure 2.2. Physical Dimensions (With the BX-BKT-FIX04 (optional brackets))

CAUTION!

302

284 (Replaceable with the BX-1000)

170

126

8-

5

[mm]

Page is loading ...

Contec BX-T1020 Owner's manual

This manual is also suitable for

Contec BX-T1020 Owner's manual

Related papers

Other documents