Schwinn Journey 2.5 Recumbent Bike Assembly Manual / Owner's Manual

Brand: Schwinn

Model: Journey 2.5 Recumbent Bike

Type: Assembly Manual / Owner's Manual

This manual is also suitable for

270 Recumbent Bike

Manual en Espa_ol LaSno Ar_ericano_

http://www_schwinn_itness_cor_ ASSEMBLY _ANUAL /OWNEFI_S I_/IANUAI-

Important Safety Instructions - Assembly 3

Safety Warning Labels / Serial Number 4

Specifications 5

Before Assembly 5

Parts 6

Hardware 7

Tools 7

Assembly 8

Moving the Machine 18

Leveling the Machine 19

Important Safety Instructions 20

Features 21

Console Features 22

Operations

Adjustments

Power Up / Idle Mode

Quick Start Program

User Profiles

Pausing or Stopping

Results / Cool Down Mode

GOAL TRACK Statistics

Console Service Mode

Maintenance

Maintenance Parts

Troubleshooting

Warranty

Sears Customer Warranty

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number

Date of Purchase

To register your product warranty, go to: vcw_.SchwinnFitness.com/register

Or call 1 (800) 605-3369.

if you have questions or problems with your product, please call 1 (800) NAUTILUS (628-8458).

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.Nautituslnc.com - Customer Service: North America (800) 605-3369,

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obeythe following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

Keep bystanders and children away from the product you are assembling at all times.

Do not connect power supply to the machine until instructed to do so.

Do not assemble this machine outdoors or in a wet or moist location.

Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps

involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

Set up this machine on a solid, level, horizontal surface.

Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will

void the warranty.

If replacement parts are necessary, use only genuine Nautilus@ replacement parts and hardware. Failure to use genuine

replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the

Manual.

Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future

reference.

Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close

range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the

obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider

in connection with the use of this equipment. Please consult the "Safety Warning Labels and Serial Number" section to

determine the location of the magnets on this product.

SerialNumber

Manufacture Date: YY/MM

P-65 _.STM TPCH

compliant ;ompliant compliant

CEC..40(

compliant

SCHWINN _

Nautilus, Inc, =

18225 NE RiverSide Parkway, Poland, Or. 97230

www.nautilus.com

Phone:I-800-NAUTILUS

Brand: SCHWINN Modeh 270,Journey 2,5,

Echelon 2,5

Electrical Rating: 9V DC,1.5A Accuracy Class: n/a

Usage Class: H / Consumer use only.

Maximum User Weight: 3001b (136kg) _"*'_1-_7

Equipment Type: Fitness

L-_

Made in: China

Patent: www.nautilusinc.com/IP 8002048_B

• Read, understand and obeyall

warnings on this machine.

• Keep children away.

• Not intended for use by anyone

under 14 years of age.

• Prior to use, read and understand

the Owner's Manual.

• Injury or death is possible if

Caution is not used while using this

machine.

• The maximum user weight for this

machine is 300 Ibs (136 kg).

• Replace any "Caution" "Warning"

or "Danger" label that is illegible,

damaged, or removed.

• The heart rate displayed may be

inaccurate and should be used for

reference only.

FCCCompliance

A Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)this device must accept any interference received, including

interference that may cause undesired operation.

Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

_._ MaximumUserWeight:

49.9" PowerRequirements:

(126.8 cm) Operational Voltage:

Operating Current:

>_64" RegulatoryApprovals:

(162.5 cm) AC Power Adapter:

_" (70.3 cm)

300 Ibs. (136 kg)

Operational Voltage 9VDC

1500 mA

UL listed, CECcertified (or equivalent), Rated

120V 60Hz Input, 9VDC, 1500mA Output.

Class 2.

This product, its packaging, and components contain chemicals known to the State of California to cause cancer,

birth defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you

would like additional information, please refer to our website at www.nautilus.com/prop65.

BeforeAssembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a

hard, level surface. Allow a workout area of a minimum 74.6" x 110.5" (189.5 cm x 280.5 cm).

BasicAssemblyTips

Follow these basic points when you assemble your machine:

• Read and understand the "Important Safety Instructions" before assembly.

• Collect allthe pieces necessary for each assembly step.

Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-

wise) to loosen, unless instructed otherwise.

When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

• The assembly can require 2 people.

,,'/ /

,i/ !

Item lily Description Item lily Description

1 1 Console 10 1 AC Adapter

2 1 Water Bottle Holder 11 1 Left Pedal

3 1 Seat Back 12 1 Front Stabilizer

4 1 Seat Cover 13 1 Right Pedal

5 1 Seat Frame Assembly 14 1 Upper Shroud

6 1 Seat Bottom 15 1 Shroud Cap

7 1 Seat Adjustment Handle 16 1 Console Mast

8 1 Rear Stabilizer 17 1 MP3 Cord

9 1 Frame

,J,,{¢>_

Item Qty Description

A 8 Button Head Hex Screw, M8x20

B 10 Button Head Hex Screw, M6x12

C 4 Flat Washer, M8

D 8 Lock Washer, M8

E 10 Flat Washer, M6

Item Qty Description

F 2 Phillips Head Screw,

G 14 Lock Washer, M6

H 4 Curved Washer, M6

I 4 Phillips Head Screw,

J 4 Curved Washer, M8

M5xl 2

M6x25

Tools

Included NotIncluded

(recommended)

4mm

6 mm

1. AttachStabilizersto Frame

Note: Hardware is pre-installed and not on the Hardware Card. *

2. Attachthe SeatFrameAssemblyto the SeatRail

NOTICE: Do not crimp the Heart Rate ©able. Once all hardware has been inserted, be sure to fully tighten it.

3. AttachSeatPadsto SeatFrameAssembly

4. Attach Coverto Frame Assembly

/ / /

5. AttachSeatAdjustmentHandleto FrameAssembly

6. Connectthe CablesandAttachthe ConsoleMastto FrameAssembly

NOTICE: Do not crimp Console Cables.

/ //

7. RemoveHardwarefromConsole

NOTICE: Do not crimp the cable.

Note: Hardware is pre-installed and not on the Hardware Card. *

8. ConnectCablesand Attach Console to FrameAssembly

NOTICE:Align the clips on the cable connectors and make sure the connectors lock. Do not crimp cables.

//ii/

9. AttachPedalsto FrameAssembly

NOTICE:The Left Pedal is reverse=threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation

isbased from a seated position on the bike. The Left Pedal has an "E',the Right Pedal an "R".

// // /

// /' /

10. AttachWaterBotUeHolderto FrameAssembly

11. ConnectACAdapter to FrameAssembly

12. Finalinspection

Inspect your machineto ensurethat all hardware istight and componentsare properly assembled.

Be sure to record the serial number inthe field provided atthe front ofthis manual.

Donot use until the machine has beenfully assembled and inspected for correct performance in accordance with the Owner's

Manual.

Moving the Machine

The machine may bemoved by one or more persons dependingon their physical abilities and capacities. Make sure that you

and others are all physically fit and able to movethe machine safely.

1. Remove the power cord.

2. Use the Transport Handle to carefully lift the machine onto the transport rollers.

3. Push the machine into position.

4. Carefully lower the machine into position.

NOTICE:Be careful when you move the bike. All abrupt motions can affect the computer operation.

Leveling the Machine

Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the knob to adjust

the stabilizer foot.

Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to

the machine can occur.

Toadjust the leveler on the Frame Rail:

1. Loosen the upper locking nut.

2. Turn the leveler to adjust the height.

Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or

damage to the machine can occur.

3. Tighten the upper locking nut to lock the leveler.

Make sure the bike is level and stable before you exercise.

Thisiconmeansapotentiallyhazardoussituationwhich,ifnotavoided,couldresultindeathorseriousinjury.

Before using this equipment, obey the following warnings:

Read and understand the complete Manual. Keep the Manual for future reference.

Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or

dislodged, contact Nautilus®Customer Service for replacement stickers.

• Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to

children.

• Not intended for use by anyone under 14 years of age.

• Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,

become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or

measured by the machine's computer for reference purposes only.

• Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Monitor the

Seat, Pedals, and Crank Arms closely. Contact Nautilus® Customer Service for repair information.

• Maximum user weight limit: 300 Ibs. (136 kg). Do not use ifyou are over this weight.

• This machine is for home use only.

• Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into

moving parts of the exercise equipment.

• Set up and operate this machine on a solid, level, horizontal surface.

• Make the Pedals stable before you step on them. Use caution when you step on and off the machine.

• Disconnect all power before servicing this machine.

• Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.

• Keep at least 24" (0.6 m) on each side of the machine clear. This is the recommended safe distance for access and

passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in

use.

• Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.

• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not hit

the user.

• Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and resistance

level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

Page is loading ...

Schwinn Journey 2.5 Recumbent Bike Assembly Manual / Owner's Manual

Brand: Schwinn

Model: Journey 2.5 Recumbent Bike

Type: Assembly Manual / Owner's Manual

This manual is also suitable for

270 Recumbent Bike

Download PDF

report

Schwinn Journey 2.5 Recumbent Bike Assembly Manual / Owner's Manual

This manual is also suitable for

Schwinn Journey 2.5 Recumbent Bike Assembly Manual / Owner's Manual

Related papers

Other documents