TOOLSTATION 6kW EHC COMET User guide

6kW EHC COMET
Brand
TOOLSTATION
Model
6kW EHC COMET
Type
User guide

TOOLSTATION 6kW EHC COMET is a fully modulating electric system boiler, designed for wet central heating and underfloor heating systems. With a range of outputs from 6kW to 14.4kW, it's suitable for both domestic and light commercial properties. It features a stainless steel heat exchanger, a digital pressure gauge, and an ErP Smart Pump for energy efficiency. The operating temperature can be adjusted from 20°C to 85°C, and it comes with a 5-year warranty.

TOOLSTATION 6kW EHC COMET is a fully modulating electric system boiler, designed for wet central heating and underfloor heating systems. With a range of outputs from 6kW to 14.4kW, it's suitable for both domestic and light commercial properties. It features a stainless steel heat exchanger, a digital pressure gauge, and an ErP Smart Pump for energy efficiency. The operating temperature can be adjusted from 20°C to 85°C, and it comes with a 5-year warranty.

Stainless Steel
Heat Exchanger
Expansion Vessel
ErP Smart Pump
Return Connection
Safety Valve
Flow Connection
Bottom Entry Pipework
Magnetic Filter
Auto Bypass Valve
Auto Air Vent
AAV Vent Pipe
Comet Features
• 100% ecient
• Integral sealed system kit
• Virtually silent in operation
• Suitable for central heating only or central
heating & hot water
• Suitable for Underfloor Heating
• No Mandatory Maintenance required
• Stainless Steel Heat Exchanger
• 5 Year Warranty (T&C’s Apply)
• Volt-Free Control Connections
• 6 Stage Heating
• Integral System Diagnostics
• Easy-Fit Connectors & Sensors
• In-Built Fault Finding Diagnostics
• High Current Thermal Cut-Out
• Vortex Flow Temperature Sensor
• Digital Pressure Gauge
• ErP Smart Pump
• Removable bottom tray
Comet Overview
• Comet Electric System Boilers are designed to
eliminate unnecessary external plumbing and pipe
work. They are the ideal choice for wet central heating
and underfloor heating systems.
• Our single phase Electric System Boiler outputs are
6kW, 9kW, 12kW with the 14.4kW available for
properties that require larger outputs.
• To ensure maximum eciency, all our Comet Boilers
are fully modulating. This unique facility will enable
the Boiler to reduce electricity consumption and
running costs.
• The operating temperature of the Boiler can be
adjusted from 20 degrees through to a maximum 85
degrees.
• In larger homes or light commercial properties with a
3-Phase electricity supply, we supply 12kW, 14,4kW,
23kW, 39kW and 48kW output Boilers.
• For multiple Boiler installations it is also possible to
install them in series in a low-loss header configuration
for properties with higher heat demands.
• Please allow an addition 3kW or 10000BTU’s if coupling
with an Indirect cylinder.
SPECIFICATIONS
INSTALLATION
Boiler Range
Pipe Entry
from Boilers
Flow & Return
Pipes
Min/Max Water
Pressure
Expansion Vessel
Dry Weight
Electricity Supply
Load Current
Heating Output
Min/Max Temp
Settings
Overheat
Protection
Pump Included
Recommended
Pump Settings
Recommended
Diameter of Mains Cable
Protection
ErP Rating
kW
mm
Bar
Ltrs
Kgs
VAC
Amp
Btu’s per/kW
°C
°C
mm
Amp
6kW
25
20472
6
32
D
9kW
38
30709
10
50
D
12kW
50
40945
16
63
D
14.4kW
60
49134
16
80
D
Bottom Entry
22
0.5/3.0
6.0
25
240V 1ph 50Hz
20/85
100
Yes
Factory Set to Max (adjustable)
01698 820533
[email protected]
Block 5, Unit 40, Third Road,
Blantyre Industrial Estate,
Blantyre, South Lanarkshire G72 0UP
Height: 710mm Width: 418mm Depth: 251mm Weight: 25kg
Heating Only Design Heating Only with Direct
Cylinder Hot Water Design
Heating and Hot Water Design
with Indirect Cylinder
Heating and Hot Water Design
with Pre-Plumbed Indirect
Cylinder
Optional Zoned Heating Circuits
System Drain Point
Secondary
Return on
Cylinders
Over 210ltrs
Filling
Loop
Full Bore
Valves
Full Bore
Valves
PRV
Zone Valves
Portable
Expansion
Balanced
Supply
Mains
Water
Hot
Water
Outlet
Filling
Loop
System Drain Point
Balanced
Supply
PRV
Mains
Water
Hot
Water
Outlet
Secondary
Return on
Cylinders
Over 210ltrs
Backup
Immersion
Heater
Dual Stat
Pocker
Full Bore
Valves
PRV
Filling
Loop
System Drain Point
Full Bore
Valves
PRV
Filling
Loop
System Drain Point
Balanced
Supply
PRV
Mains
Water
Hot
Water
Outlet
Secondary
Return on
Cylinders
Over 210ltrs
Direct
Immersion
Heater
  • Page 1 1
  • Page 2 2

TOOLSTATION 6kW EHC COMET User guide

6kW EHC COMET
Brand
TOOLSTATION
Model
6kW EHC COMET
Type
User guide

TOOLSTATION 6kW EHC COMET is a fully modulating electric system boiler, designed for wet central heating and underfloor heating systems. With a range of outputs from 6kW to 14.4kW, it's suitable for both domestic and light commercial properties. It features a stainless steel heat exchanger, a digital pressure gauge, and an ErP Smart Pump for energy efficiency. The operating temperature can be adjusted from 20°C to 85°C, and it comes with a 5-year warranty.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents