LED Floodlight Installation Instructions
(ID:G2) FL30W-06 FL50W-06 FL70W-06 FL80W-06 FL100W-06
FL120W-06 FL150W-06 FL180W-06 FL200W-06
1. Installation Dimensions(Unit: mm)
Product name L3
L2L1 Ø2Ø1
FL30W/50W-06 (ID:G2) 174.0 150.0126.0 10.513.0
FL70W/80W-06 (ID:G2)
FL100W/120W-06 (ID:G2)
FL150W/180W/200W-06 (ID:G2) 220.0180.0140.0 15.013.0
216.5180.0143.5 13.013.0
216.5180.0143.5 13.013.0
RoHS 35,000h Outdoor
3. Attention
2. Installation Method
Notes before installation:
Please read LED Flood light use manual carefully before installation and follow the instructions.
To avoid accidents like damage, dropping, electric shock, fire, please don't arbitrarily retrofit or change any lamp fittings.
Clean lamps with a soft wrung-out soapy cloth, and then wipe it with a dry cloth. Please don't wipe the lamps with gasoline
or other volatiles. Please don't spray insecticides on the lamps. Otherwise, it may cause discoloration or damage.
Please do not open the lamp without permission.
Please turn off the power when in installation or maintenance.
1. Install by qualified electricians only.
2. Make sure that the supply voltage is disconnected before installation.
3. Make sure the voltage is suitable with the lamps, And L/N/G connect properly.
4. All the lights during installation or using should not be leds’s cover vertical upside or Vertical down.
5. Don’t open the lamps without Manufacturer’s Authorization.
LNGND
D1
01 02 03 04 05
50W
120W
200W
150mm
180mm
180mm
D1 D2
12mm
10mm
12mm
Brown - L
Blue --- N
G/Y --- GND
D2
1. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged,
the luminaire shall be destroyed.
2. The light source contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
Caution, risk of electric shock
L1
L3
L2
Ø1 Ø2
www.breegroup.com
/