2. Twelve South
  3. Curve Flex Stand

Twelve South Curve Flex Stand User guide

  • Hello! I am an AI chatbot trained to assist you with the Twelve South Curve Flex Stand User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
B
A
C
A
C
B
C
B
Curve Flex
owner’s guide
Have questions? Visit twelvesouth.com or contact [email protected]om
©2022 Twelve South, LLC. All rights reserved.
Using Curve Flex
Using Curve Flex
Using Curve Flex
Using Curve Flex
What’s in the Box
Adjusting the tension of Curve Flex
Place Curve Flex on a desk or table.
Take care not to
overextend the
front hinges more
than -degrees.
Notice this opens
the back hinges to
their max angle of
35-degrees. To RAISE the MacBook,
REMOVE your MacBook
rst, extend Curve Flex
all the way up again,
then replace MacBook
and adjust back down.
Hold down while gently liing to its maximum height.
Curve Flex
(with removable Getting Started guide)
Travel Sleeve
(with hidden Adjustment Tool
storage pocket inside)
Adjustment Tool
stored in Travel Sleeve
Adjustment Tool
(mm Hex Wrench located
in Travel Sleeve pocket)
Hold down while carefully liing until you feel it stop.
Use the included Adjustment Tool to tighten
(clockwise) or loosen (counter-clockwise) the
four hinges on Curve Flex.
Open your MacBook rst, then place on Curve Flex.
To adjust height & angle, hold MacBook and Curve Flex
together, then gently press down.
 
3 4
Raising and adjusting your
Curve Flex while it’s resting
on a table is much easier -
and highly recommended.
/