i-PRO i-PRO WV-S25500-V3L S-Series Wide Lineup High Resolution Network Camera Installation guide

i-PRO WV-S25500-V3L S-Series Wide Lineup High Resolution Network Camera
i-PRO
Brand
i-PRO
Model
i-PRO WV-S25500-V3L S-Series Wide Lineup High Resolution Network Camera
Category
Security cameras
Type
Installation guide

This manual is also suitable for

Grommet when I/O cable is
not used. (When the camera
is shipped, this grommet is
attached to the camera.)
mark
Screen upward direction
IR LED (2 places)
SD memory card warning
/error indicator
Direction marker for
installation (TOP)
on the wall.
Direction marker for
installation (FRONT)
on the ceiling.
LINK indicator
(orange)
ACT indicator
(green)
SD ON/OFF button
SD (MOUNT)
indicator
TELE+AF button
257V2L
256V2L
255V3L
WIDE+AF button
257V2L
256V2L
255V3L
M4 (4 pcs.) (locally procured)
Minimum pull-out strength: 196 N {44 lbf} (per 1 pc.)
Parts and functions
Preparations
Step1
Step2
All off
Operating Instructions
"Format the microSD memory card"
Use a microSD memory card dedicated
to i-PRO cameras.
Installation Procedure
MONITOR OUT
terminal
Operating Instructions
"Indicators"
A click sound is heard.
Common
When using attachment for the conduit When using a RJ45 Ethernet cable (WV-QCA500A: optional accessory)
Dome cover
Enclosure
Base cover
Attachment for
the conduit
Fixing position for conduit
The female thread for conduit
is compliant with ANSI NPSM
(parallel pipe threads) 3/4 or
ISO 228-1 (parallel pipe threads)
G3/4. Network connector
(RJ45)
I/O cable terminal
Support bracket
INITIAL SET button
When using an I/O cable (WV-QCA501A: optional accessory)
Grommet fixing position
for Ethernet cable
Bit (accessory)
RJ45 Ethernet cable
(WV-QCA500A)
M4 (4 pcs.) (locally procured)
Minimum pull-out strength: 196 N {44 lbf} (per 1 pc.)
M4x8 mm {5/16 inches} (4 pcs.) (WV-QJB501-W accessory)
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
M4 (4 pcs.)
(locally procured)
Minimum pull-out strength: 196 N {44 lbf} (per 1 pc.)
M4 (6 pcs.)
(locally procured)
Minimum pull-out strength: 196 N {44 lbf} (per 1 pc.)
93 mm {3-21/32 inches}
46 mm
{1-13/16 inches}
46 mm
{1-13/16 inches}
116.5 mm
{4-19/32 inches}
83.5 mm
{3-9/32
inches}
83.5 mm
{3-9/32
inches}
23.8 mm
{15/16 inches}
ø25.4 mm
{1 inch}
ø73 mm
{2-7/8 inches}
ø4 mm×4
ø4 mm×6
FRONT
FRONT
Cable for easy kitting
FRONT
avs0222-1032
Printed in China
Lights
Blinks
ights off
If you want to change the direction of
the camera after it has been installed.
Install auxiliary wire
Gangbox/ junction box Base bracket (WV-QJB501-W)
Directly mount the camera
Note
• Camera can be installed in each direction.
M4 (4 pcs.)
(locally procured)
Minimum pull-out strength: 196 N {44 lbf} (per 1 pc.)
Do not use for
actual installation.
Support website Technical
information website
Audio in
(White)
Audio out
(Black)
< 1 m {3.28 feet} (Mic)
< 10 m {32.8 feet} (Line)
< 10 m {32.8 feet}
ALARM IN2 (Red)
GND (Black)
EXT I/O
DC 12V
RJ45 Ethernet (PoE)
Category 5e or better, straight, 4 pairs (8 pins)
<100 m {328 feet}
TELE+AFWIDE+AF
0.59 N m {0.44 lbf·ft}
Step5
Step6
Step7
Basic Information " Cables"
Operating Instructions "Audio output terminal"
Turn the power on(DC 12 V/PoE).
If there is a protection film on the lens, remove it.
Operating Instructions
"Image rotation 180°"
0.78 N m
{0.58 lbf·ft}
Step3
Step4
I/O cable
WV-QCA501A:
optional accessory
2P power cable
(WV-QCA501A accessory)
4P alarm cable
(WV-QCA501A accessory)
DC 12V (Red)
GND(Black)
ALARM IN3 (Gray)
ALARM IN1 (Green)
approx. 20 mm {25/32 inches}
approx. 20 mm
{25/32 inches}
RJ45
Ethernet
cable
Grommet
(accessory)
Reuse
RJ45 Ethernet
(PoE)
Category 5e or
better, straight,
4 pairs (8 pins
)
<100 m {328 feet}
RJ45 cap
(accessory)
150mm
{5-29/32 inches}
FRONT
TOP
0.78 N m {0.58 lbf·ft
0.59 N m
{0.44 lbf·ft}
Protruding part of base cover
(2 places)
0.78 N m
{8.0 kgf cm}
IR LED
Operating Instructions
"Focus adjustment"
Technical information website
"IP Setting Software"
<Control No.: C0123>
or
"i-PRO Configuration Tool(iCT)"
<Control No.: C0133>
"Extra optical zoom"
<Control No.: C0124>
"Camera images that appear to overlap"
<Control No.: C0128>
TELE+AF
WIDE+AF
Ceiling
IR LED
Step3
OPEN
Outside
Inside
Ceiling WallWall
Inside Inside
Outside
Outside
Waterproof tape
(WV-QCA501A accessory)
Step5 (Continued)
Install auxiliary wire
GND line (locally procured)
M3 6 mm {1/4 inches}
Recommended tightening torque
0.69 N·m {
0
.
51
lbf·ft}
Technical information website
"Countermeasure for Lightning Surge"
<Control No.: C0121>
Install auxiliary wire
Support bracket
Support bracket
Stretch the waterproof tape by
about twice the length to use.
Center
When using an I/O cable
Inside
Outside
When using an I/O cable
Protruding part of
base cover(2 places)
ø5 mm ø8.5 mm
{ø3/16 inches to ø11/32 inches}
  • Page 1 1
  • Page 2 2

i-PRO i-PRO WV-S25500-V3L S-Series Wide Lineup High Resolution Network Camera Installation guide

i-PRO WV-S25500-V3L S-Series Wide Lineup High Resolution Network Camera
i-PRO
Brand
i-PRO
Model
i-PRO WV-S25500-V3L S-Series Wide Lineup High Resolution Network Camera
Category
Security cameras
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents