S25-W
Fan Configuration
Front Panel 2x 120 mm Fan (Pre-Installed)
or Radiator (Optional)
Rear Panel 1x 120 mm LED Fan (Pre-Installed)
Top Panel 3x 120 mm or 2x 140 mm Fan (Optional)*
Compatibility
Mainboard Mini-ITX, Micro-ATX, ATX
Max. Length Graphics Card 40.0 cm
Max. Height CPU Cooler 16.7 cm
Max. Length PSU 20.5 cm
Max. Height Radiator incl. Fan (Front) 5.5 cm
I/O
USB 3.0 (Front): 2 | Audio (Front):
Max. Drive Bays
2 x 5.25“ | 4 x 3.5“ | 4 x 2.5“
Package Contents
S25-W, Accessory Set, Manual
Specifications
Product Name S25-W
Form Factor ATX
Expansion Slots 7
Interior Painting
Tool-free Devices Installation
Cable Management System
Side Panel Acrylic
Weight 6.5 kg
Dimensions (L x W x H) 45.0 x 21.0 x 46.5 cm
01
EAN Code
S25-W 4044951019304
* when 5.25“ drive mounting bracket is removed
Features
The S25-W is an ATX midi tower which combines a design made for
high-end hardware with a classically minimalistic and straightforward
appearance. With its various installation possibilities, the S25-W is sui-
table as either a gaming case, a media center or an oce PC. There is
space for up to seven fans, numerous drives and larger versions of gra-
phics cards, CPU coolers and power supplies. The S25-W is completed
with features such as removable and easy-to-clean dust filters, a cable
management system and an easily detachable front panel.
FOCUSED ON THE ESSENTIALS
Although the S25-W has a layout which is fully made for gaming, the classic
and minimalistic design addresses gamers who want, above all, to just
concentrate on the essentials. Due to low-key design of the S25-W, the main
highlight will be the installed hardware behind the large acrylic window of the
case. The pre-installed LED fan on the rear panel provides atmospheric lighting
in blue, which is perfectly accentuated against the matt black of the casing.
READY FOR THE OPTIMAL AIRFLOW
The S25-W has a pre-installed 120 mm LED fan at the back and two pre-
installed fans behind the front panel. In addition to this, four more fans can
be installed for a customized airflow. One of these fans can be located in
the HDD/SSD cage at the bottom of the case, while three other fans can be
mounted under the top panel. Of course, instead of fans, a radiator of up to
280 mm can be installed behind the front panel.
CLEVER DUST PROTECTION
The front panel of the S25-W has numerous air inlets (only visible from the
sides of the case) to ensure a supply of cool air. So that the inside of the
case is suciently protected from dust, there are dust filters behind the
front panel, on the top panel and on the bottom panel. All the dust filters can
be removed and cleaned. The dust filter on the top panel is conveniently
attached with a magnetic fastening.
SYSTEMATIC TIDINESS
Apart from a power supply tunnel, which houses the power supply together
with its cabling, the S25-W also has cable pass-throughs to ensure that the
entire cabling is tidy. An opening in the mainboard tray facilitates the ins-
tallation of CPU coolers. Another advantage of the S25-W is the cable-free
design of the front panel: The panel can be easily detached without having
to disconnect any wiring.
VARIOUS INSTALLATION POSSIBILITIES
The S25-W oers sucient room for the installation of larger components.
Graphics cards with a length of 40 cm, CPU coolers with a height of up to
16.7 cm as well as power supplies with a length up to 20.5 cm can all be
accommodated within the case. In addition, up to six SSDs and three 3.5”
HDDs will find room. Even two optical drives can be installed. The drive
mounts can also be removed if desired.
1
2
Avid ISIS 5000 3.1 Installation guide
Dell Force10 S25-01-GE-24P User guide
Avid ISIS 5500 4.7 Installation guide
AIC RSC-1DT3 User manual
IBM 520Q User manual
Allied T-Series (ELXC) User manual