2. LEDmaxx
  3. LED Tischleuchte Anbauleuchte Luka Up & Down

LEDmaxx LED Tischleuchte Anbauleuchte Luka Up & Down User manual

  • Hello, I'm a chat assistant that has analyzed the provided installation instruction for LEDmaxx LED Desk Lights including models TLMS1, TLMW1 and TLMB1. This document provides instructions on the installation process and details the motion sensor functionality, dimming capabilities and mounting options. I am ready to answer any questions you may have about installation and operation.
  • How do I turn the light on and off?
    How do I dim the light?
    What happens if no presence is detected?
1. Kurz drücken, um das Licht direkt ein- und auszuschalten
2. Zum Dimmern lange drücken
Erkennbarer Bereich
≤3500 mm
≤85°
Bewegungssensor
max 35 mm
max 75 mm
1.Lochmontage 2.Seitenmontage
30mm>Lochdurchmesser>22mm
3.Seitenmontage (hoch)
1 (a)
2 (b)
3 (c)
Clip
I1 I2 I3
I4 a1 a2
b1
c2 c2.1 c2.2
c2.2
c2.4
c2.3
c2.1
c2.3 c2.4
b2 c1
2 St.
1 St.
1 St.
I
2 St.
1 St.
max 35 mm
max 75 mm
1.Direct clamp 2.Side clamp
30mm>hole diameter>22mm
3.Side clamp (High version)
1 (a)
2 (b)
3 (c)
Clip
I1 I2 I3
I4 a1 a2
b1
c2 c2.1 c2.2
c2.2
c2.4
c2.3
c2.1
c2.3 c2.4
b2 c1
2 Pcs
1 Pcs
1 Pcs
I
Motion Sensor
1.Turn on the lamp. 2. The lamp brightness reduce
to 30% when there is no
presence in 30min.
3. After another 30min, the lamp
switches off automatically when
still no presence detected.
4. The lamp will switches on
autocmetically at once when
there is presence detected.
1. Short press to turn off/on.
2. Long press to dimming.
Detectable area
≤3500 mm
≤85°
/