Job Name
Location Date
Engineer Approval
Submitted To Construction
Submitted By Unit No
Reference Drawing No
Nominal Capacity
Connection Method
Liquid Ø1/4 (Ø6.35)
Gas Ø1/2 (Ø12.70)
in Ø 1 (I.D.), Ø 1-1/4 (O.D.
mm Ø 25 (I.D.), Ø 32 (O.D.)
in 7-13/16 × 35-7/16 × 24-7/16
mm 198 × 900 × 620
in 10-13/16 × 37-3/16 × 30-3/8
mm 274 × 1,145 × 772
Net Weight 44 (20)
Gross Weight 57 (26)
208/230 V ~ 60 Hz
Input Power W73
WG (Pa)
ETL#:
Effective Date: 2/16/2022 Version ADUH18LUAS1 -2022A
^ Required to connect indoor unit to select multi-zone outdoor units.
Reference D&T for specific combinations.
Recommended Static Pressure
MODBUS Converter
UTD-VMSX
* Required to connect wired remote controller to indoor unit.
UTY-XWZXZG External Connect Kit
12 Year Compressor, 12 Year Parts Warranty when registered within
60 days of installation in a residence, and installed by a Fujitsu Elite
contractor
Heating
CFM (m3/h)
Heating
Fujitsu General America, Inc. • 340 Changebrige Rd, Pine Brook, NJ 07058 • Toll Free: (888) 888-3424 • www.fujitsugeneral.com
Airflow Rate
Cooling
Indoor Unit
Cooling
Due to continuous product improvements, specifications are subject to change
without notice. Please log in to the Fujitsu Portal for the most up-to-date
documentation https://connect.fujitsugeneral.com
dB (A)
Gross (H x W x D)
lb (kg)
in (mm)
INDOOR DIMENSIONS & WEIGHT
ELECTRICAL SPECIFICATIONS
7 Year Compressor, 5 Year Parts out-of-the-box Warranty
10 Year Compressor, 10 Year Parts Warranty when registered within
60 days of installation in a residence
Drain hose
Net (H x W x D)
#REF!
•Auto/Cool/Dry/Fan/Heat Modes
•Built in Condensate Pump
•Auxiliary Heat Control Logic
IR Kit (Remote & IR Receiver Unit)
18,000 BTU Slim Duct Type
Inverter Driven Heat Pump