AcuRite 00990 User manual

Brand: AcuRite

Model: 00990

Type: User manual

AcuRite 00990 is a wireless thermometer with two main units and a remote sensor. It provides synchronized outdoor LCD temperature displays, with a range of 100 feet. The temperature measurement ranges from 32º F to 122º F for the indoor main unit and 0º F to 130º F for the outdoor remote sensor, making it suitable for various indoor and outdoor environments. The device is battery-operated, requiring six AAA alkaline cell batteries (not included). The main units are intended for indoor use only, while the wireless sensor is water-resistant for outdoor placement.

If at any time in the future you need to dispose of this product please note that:

Waste electrical products should not be disposed together with household waste.

Please recycle where facilities exist. Check with your local Authority or retailer

for recycling advice

Tested to comply with FCC standards

FOR HOME OR OFFICE USE

LIMITED WARRANTY -INTERNATIONAL

Consumer may have more remedies at law than follows. Chaney Instrument Company

warrants to the owner, this product to be free from defect in material and worklnanship

for one year from date of purchase. CHANEY INSTRUMENT SHALL NOT BE

LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES,

WHETHER ARISING IN CONTRACT OR TORT. Chaney Instrument's obligation

(at its option) is limited to repair or replace this product. For in-warranty repair, send

product, accompanied by Guarantee, bearing Dealer's name and date of purchase, with

$5.00 to cover handling and postage, to:

www.chaneyinstrument.com

Tel: 877-221-1252

Made in China

Chaney Instrument Company

965 Wells Street

Lake Geneva, Wisconsin 53147

.ACU

►

R!TE.

ACU>RITE. .AIOU>RtTE.

7 'oF

' 1.2 7 'oF

I 1.2

'OF

1.1 6 fF

1.1

------------------------------

00990 INST0330-06

Do not return product to retail store. For Technical Assistance and

product return information, please call Customer Care:

877-221-1252

HOURS: Monday through Friday from 8:00 a.m. to 4:45 pm CST.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN

ENVIRONMENTALLY SAFE WAY IN ACCORDANCE WITH

YOUR LOCAL REGULATIONS

Instruction Manual

Wireless Thermometer

combo pack with 2 main units

MODEL # 00990

INDOOR INDOOR

OUTDOOR OUTDOOR

Wireless Sensor Main Units

Thank You! We appreciate you for purchasing this wireless thermometer.

We hope you enjoy using this versatile wireless thermometer!

Features:

• Dual main units with syncronized outdoor LCD temperature displays.

• Wireless Sensor – range is 100’ (33m).

• Temperature measurement ranges:

Indoor main unit: 32º F to 122º F

Outdoor remote sensor: 0º F to 130º F

• Battery operated. (batteries not included)

1 CHECK PACKAGE CONTENTS

(2) Main units - dimensions each: 1.5” x 4.75” x 1.5”*

(1) Wireless Sensor – dimensions: 2” x 2.5” x 1.3”*

(1) Instructions

*Dimensions are approximate.

NOTE: Carefully remove the units from their packaging. Discard the packaging and

save the instructions.

2 READ

Please read these instructions carefully before you set up the thermometer. In this

way you can become familiar with all of the thermometer’s features and get the most

benefit from them.

3 INSTALLATION

Operating Range of Batteries Severe cold (below -4º F/-20º C) can cause alkaline

batteries to freeze and function improperly. Use lithium

batteries in extremely low temperature conditions to

ensure continued operation.

LITHIUM

BATTERIES

ALKALINE

BATTERIES

22ºF ( 30ºC) (70ºC) 158ºF

-4ºF 158ºF

(70ºC)

( 20ºC)

Main Units

The Main units are intended for indoor use only. When deciding where to put the main units,

choose a dry location away from dust, dirt, mold and smoke, and avoid temperature

extremes. Do not drop the main units. They are sensitive electronic devices, and are not

designed to withstand high impact blows.

NOTE:Install batteries in both of the MAIN UNITS before installing batteries in the

wireless sensor.

Main Unit Batteries: On the back of each main unit, remove the battery compartment

covers. Insert 2 AAA alkaline (or lithium) batteries in each main unit making sure they are

installed according to the correct polarity (+/-). Replace the covers on each main unit.

Wireless Sensor

This water resistant wireless sensor is intended for outdoor use. When deciding where to

place the sensor, make sure it will be protected from direct sunlight and precipitation. Do not

drop the remote sensor. It is sensitive, and not designed to withstand high impact blows.

Wireless Sensor Batteries: On the back of the wireless sensor unit, remove the battery

compartment cover. Insert 2 AAA alkaline (or lithium) batteries making sure they are

installed according to the correct polarity (+/-). Replace the cover.

You may need to wait a few minutes after batteries are installed for the units to communi-

cate with each other. When they do, both the indoor and outdoor temperatures will be

shown on the main unit LCD display. If nothing is displayed after a few minutes, refer to

section 4 of this manual for troubleshooting.

NOTE: The wireless sensor’s LED flashes momentarily whenever it sends information –

about once each minute.

Main Units Wireless Sensor

5 ADDITIONAL INFORMATION

Main Unit LCD display

shows – – – continuously

for the OUT display.

Main Unit LCD display is

blank. The main unit does

not display any readings

Main Unit LCD display is

operating erratically

Wireless Sensor Unit is

operating erratically

a. Wireless sensor is located too far from the main

unit, move the sensor closer to the main unit.

b. Sensor batteries may need replacing, replace

batteries according to instructions in this manual.

NOTE:After replacing remote sensor batteries, you must

press the RESET button on the main unit.

Follow section 3 of this instruction booklet and

replace the batteries in the main unit.

The main unit may be affected by electrical interfer-

ence. Press the RESET button on the main unit. This

should give you the indoor temperature immediately

and the outdoor temperature within one minute.

The sensor may be affected by electrical interference.

Press the RESET button on the remote sensor.

(located inside the battery compartment between the

batteries.) If the RESET button is pressed, you then

also must press the RESET button on the Main units.

You may also need to relocate all units away from any

electronic interference to restore normal operation.

PROBLEM SOLUTION

AAA

--'o''.,.

- -

/ I \'

110 feet I 100 feet maximum

• 0 •

0 0

• OPEN

AAA

PULL BOTTOM

OUT & DOWN

TO OPEN COVER

Placement & Mounting

Choose a location for each unit that is at least 10 feet away from other electronic devices

that may interfere with the wireless signal. When you decide on a good location, (A steady

signal from the sensor is being received by the main unit LCD display), hang the main unit

and wireless sensor using the triangular indents found on the backs of the units.

You may choose to place the main units on a table-top or desktop surface.

INDOOR

OUTDOOR

INDOOR

OUTDOOR

Pictured above is a common placement scenario. The main units can be placed

anywhere within 100 feet of the wireless sensor. Placement is not limited to one unit

being placed on a first and second level of a building or house as pictured here.

4 TROUBLESHOOTING

Batteries: 6 x AAA alkaline cell batteries total (not included).

AcuRite 00990 User manual

AcuRite 00990 User manual

Related papers

Other documents