Samsung RSG257AAWP User manual

Brand: Samsung

Model: RSG257AAWP

Category: Side-by-side fridge-freezers

Type: User manual

This manual is also suitable for

RSG257AARS

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service or accessory parts,

please register your product at or contact

www.samsung.com/register

1-800-SAMSUNG (726-7864)

RSG257**

English

Free Standing Appliance

Features of your new Refrigerator

KEY FEATURES OF YOUR NEW REFRIGERATOR

Your Samsung Side-By-Side Refrigerator comes equipped with many space-saving, innovative storage and

energy-efﬁ cient features.

• Twin Cooling Plus™

The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system,

the Freezer and Refrigerator cool more efﬁ ciently. Additionally, this separate air ﬂ ow system

prevents food odor of one compartment from seeping into other compartments.

• Multi Airﬂ ow

Provides even cooling throughout the refrigerator to maintain optimal temperatures

to keep food fresh.

• LED Tower Lighting

See everything in a new light with LED tower lighting.

• Premium Design Ice and Water Dispenser

Quick and easy access to ﬁ ltered water and cubed/crushed ice with the external dispenser.

• External Digital Display and Control

Controlling the refrigerator is easy with the external digital display. It shows the inside

temperatures, when to change your ﬁ lter and also controls the ice and water dispenser.

• Clear View Icemaker

The Icemaker is located in the freezer door, this ensures that all the freezer shelf space can be

fully utilized. Ice cubes are quickly produced and the clear ice bucket lets you easily see the

amount of ice cubes produced.

2_ features

For easy future reference write the model and serial

number down. You will ﬁ nd your model number on

the left hand side wall of the refrigerator.

Model #

Serial #

Safety Information

SAFETY INFORMATION

Before using your new Samsung Side-By-Side Refrigerator, please read this manual thoroughly

to ensure that you know how to safely and efﬁ ciently operate the features and functions that your

new appliance offers.

Because the following instruction covers various models, the characteristics of your Refrigerator

may differ slightly from the Refrigerator described in this manual. If you have any question, contact

us at 1-800-SAMSUNG or ﬁ nd help and information online at www.samsung.com.

What the icons and signs in this user manual mean :

WARNING

Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or property

damage.

CAUTION

To reduce the risk of ﬁ re, explosion, electric shock, or personal injury when using your

refrigerator, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

These warning signs are here to prevent injury to you and others.

Please follow them explicitly

Keep this manual in a safe place for future reference.

SEVERE WARNING SIGNS

Do not plug several appliances into the same power socket.

•

Large appliances draw a lot of power. Powering more than one appliance or machine from a single power source

could cause overheating and cause a ﬁ re.

Make sure that the power plug is not kinked or damaged by the back of the Refrigerator.

• A damaged power plug may overheat and cause a ﬁ re.

Do not spray water directly into or on the outside of the Refrigerator/Freezer drawer.

• Water could get into the interior machine parts and cause electric shock.

Do not use aerosols near the Refrigerator.

• Aerosols used near the Refrigerator may cause an explosion or ﬁ re.

safety information _3

Do not put undue stress on the power cord or place heavy articles on it.

• Placing heavy articles on the power cord create the risk of explosion or ﬁ re.

Do not insert the power plug with wet hands.

• It may cause electric shock.

Do not put a container ﬁ lled with water on the Refrigerator.

• If it spills, it may cause ﬁ re or electric shock.

Do not install the Refrigerator in a damp place or place where it may come in contact with water.

• Wet and/or deteriorated insulation of the internal electrical parts may cause electric shock or ﬁ re.

Do not store volatile or ﬂ ammable substances in the Refrigerator.

• Storing benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.

Do not disassemble or repair the Refrigerator by yourself.

• You may run the risk of ﬁ re, appliance malfunctions and/or personal injury. Call your nearest service center

for help from a qualiﬁ ed service technician.

Unplug the Refrigerator before changing the interior light.

• Changing the light while the Refrigerator is plugged in may cause electric shock.

If you wish to dispose of the Refrigerator, remove the doors and seals before throwing it away.

• The doors(and their seals) can entrap a child if they climb into the Refrigerator.

Make sure that the doors are off, and ensure that no one is suffocated by being locked inside.

The Refrigerator must be safely grounded

• Always make sure that you have grounded the Refrigerator before attempting to investigate or repair any

part of the appliance. Power leakages can cause severe electric shock.

Never use gas pipes, telephone lines or other potential lightning attractors as an

electrical ground.

• Improper use of the grounding plug can result in a risk of electric shock. If it is necessary to use an

extension cord to power the Refrigerator, use only a 3-wire extension cord that has a 3-blade ground

plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extention

cord should be AC 115V~120V, 10A, or more. Additionally, if a grounding adapter is used, make sure the

receptacle box is also fully grounded.

Use good judgment when ﬁ lling the Refrigerator with food and drinks.

• In an overfull Refrigerator, heavy, fragile, bulky or breakable items may fall out and cause personal injury

and/or damage to surrounding objects.

Do not put bottles or glass containers in the Freezer drawer.

• When the contents freeze and then expand, the glass may break and cause personal injury or leave

dangerous glass shards in the Freezer.

Safety Information

4_ safety information

CAUTION SIGNS

If the electrical wall socket is loose, do not insert the power plug.

• There is a risk of electric shock or ﬁ re. Have the plug looked at by a licensed electrician.

Never unplug your Refrigerator by pulling on the power cord.

• Always grip the power cord ﬁ rmly and pull straight out from the outlet. Yanking or pulling on the power

cord may cause a short-circuit, ﬁ re and/or electric shock.

•

A damaged power cord must be replaced by the manufacturer, a certiﬁ ed service agent or qualiﬁ ed service personnel.

Do not store articles on the top of the appliance.

• When you open or close the door, the articles may fall and cause personal injury and /or damage to

surrounding objects.

Do not store pharmaceutical products, scientiﬁ c materials and temperature-sensitive

products in the refrigerator.

• Products that require exact temperature controls should not be stored in the Refrigerator.

Do not allow children to climb, stand or hang on shelves and handles of the

Refrigerator. They could damage the Refrigerator and seriously injure themselves.

Do not sit on the freezer door. The door may break.Do not allow children to climb into

the freezer basket.

If you notice a chemical or burning plastic smell or see smoke, unplug the Refrigerator

immediately and contact your Samsung Electronics Service Center.

After your Refrigerator is in operation, do not touch the cold surfaces in the Freezer

compartment. Particularly when hands are damp or wet, skin may adhere to these

extremely cold surfaces.

• Skin may stick to the surface and you may get frostbite.

Do not put your hands under the appliance.

• Any sharp edges may cause personal injury.

Never put ﬁ ngers or other objects into the water dispenser hole or ice chute.

• It may cause personal injury and/or material damage.

If the Refrigerator will not be used for a long period of time (for example, over

several months), unplug the power from the wall.

• Over time, deterioration in the power cord insulation may cause ﬁ re.

Do not use a wet or damp cloth when cleaning the plug.

Remove any dust or foreign matter from the power plug pins.

• A dirty power plug can increase the risk of ﬁ re.

If the Refrigerator is disconnected from the power supply, you should wait for

at least ﬁ ve minutes before plugging it back in.

safety information _5

CAUTION

Do not place the refrigerator directly in sunlight.

The appliance must be positioned for easy access to power source.

If the power cord is damaged, it must be replaced by the manufacturer, a

certiﬁ ed service agent or qualiﬁ ed service personnel.

If you have a long vacation planned, empty the Refrigerator and turn it off.

• Wipe excess moisture from the inside and leave the doors open to keep odor and mold from

developing.

Service warranty and Modiﬁ cation

• Any changes or modiﬁ cations performed by a 3rd party on this ﬁ nished appliance is not covered

under Samsung warranty service, nor can Samsung be responsible for safety issues that result

from 3rd party modiﬁ cations.

Children can get trapped inside Refrigerators.

Before you throw away your old Refrigerator or Freezer, make sure that you;

• Take off the doors.

• Leave all shelves in places so that children may not easily climb inside and shut the door while they

are inside.

This appliance is not intended for use by small children or inﬁ rm persons without

capable, adult supervision. Small children should be supervised when using the

appliance.

Do not block air holes

• If the air holes are blocked, especially with a plastic bag, refrigerator can be over cooled.

If this cooling period lasts long, the water ﬁ lter may break and cause water leakage.

ADDITIONAL TIPS FOR PROPER USAGE

• In the event of a power failure, call the local ofﬁ ce of your Electricity Company and ask how long it

is going to last.

- Most power failures that are corrected within an hour or two will not affect your refrigerator

temperatures. However, you should minimize the number of door openings while the power is off.

- Should the power failure last more than 2 hours, remove all ice in the Ice Bucket.

- Should the power failure last more than 24 hours, remove all frozen food.

State of California Proposition 65 Warnings:

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to

publish a list of substances known to the State of California to cause cancer, birth defects, or other

reproductive harm, and requires businesses to warn of potential exposure to such substances.

This product contains a chemical known to the State of California to cause cancer, birth defects, or

other reproductive harm.

This appliance can cause low-level exposure to some of the substances listed, including benzene,

formaldehyde, and carbon monoxide.

Safety Information

6_ safety information

CAUTION

WARNING

Contents

SETTING UP YOUR SIDE-BY-SIDE

REFRIGERATOR

OPERATING THE SAMSUNG

SIDE-BY-SIDE REFRIGERATOR

TROUBLESHOOTING

WARRANTY

8 Getting ready to install the refrigerator

10 Setting up the refrigerator doors

13 Levelling the refrigerator

14 Making minor adjustments to the doors

15 Checking the water dispenser line

16 Installing the water line

18 Using the control panel/Digital display

20 Controlling the temperature

21 Using the ice and cold water dispenser

22 Storing food

24 Removing the freezer/fridge accessories

25 Cleaning the refrigerator

26 Changing the interior lights, the water ﬁ lters

27 Using the doors

28 Before using icemaker

29 Troubleshooting

30 Warranty

contents _7

8_ setting up

setting up your side-by-side refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many

state-of-the-art features and efﬁ ciencies that this new appliance has to offer.

Selecting the best location for the refrigerator

• Select a location with easy access to the water supply.

• Select a location without direct exposure to sunlight.

• Select a location with level (or nearly level) ﬂ ooring.

• Select a location with enough space for the refrigerator doors to open easily.

• Allow sufﬁ cient space to the right, left, back and top for air circulation.

- If your refrigerator is not level, the internal cooling system may not work correctly.

- Refer to drawing and dimensions below for overall space required for use.

• Please ensure that appliance can be moved freely in the event of maintenance & service.

When moving your refrigerator

To prevent ﬂ oor damage, be sure the front levelling legs are

in the up position (above the ﬂ oor). Refer to ‘Levelling the

refrigerator’ in the manual(page 12).

To protect the ﬁ nish of the ﬂ ooring, place a protection sheet,

such as packing carton under the refrigerator.

When installing, servicing or cleaning behind the

refrigerator, be sure to pull the unit straight out

and push back in straight after ﬁ nishing.

at least

¼”

at least

¼”

Leg

Screw Driver

CAUTION

setting up _9

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and

functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

If not, ﬁ rst check the power supply and electricity source or try the troubleshooting section at the back of

this user’s guide. If you have any further questions, contact your Samsung Electronics service center.

1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the

Refrigerator. Refer to installation instructions in this manual.

2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly

chilled and the motor will run smoothly.

4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can

store food and drinks in the Refrigerator after the temperature is sufﬁ ciently cool.

Check the accessory list below.

01 SETTING UP

First things ﬁ rst! Make sure that you can easily move your refrigerator to its ﬁ nal location by measuring

doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth.

MODEL RSG257**

Dimensions

(inch/mm)

Width

35 7/8” (912 mm)

Height

Without Hinge

68 5/8” (1742 mm)

With Hinge

70 ” (1778 mm)

Depth

Without Door

23 5/8” (600 mm)

With Door

30 ” (762 mm)

• Allow clearance to the right, left, back and top when installing. This will help reduce power

consumption and keep your energy bills lower.

• Do not install the refrigerator where the temperature can drop below 50°F (10°C).

• Make sure you disconnect the water supply line BEFORE removing the freezer door. See the

next section on “Separating the Water Line” to avoid damage.

Water ﬁ lter

(DA29-00003B)

Hex wrench

(DA80-00002C)

Clip

(DA61-04521A)

Clip

(DA61-04522A)

Screw

(6001-000541)

10_ setting up

setting up your side-by-side refrigerator

SETTING UP THE REFRIGERATOR DOORS

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the

three screws counter-clockwise

Separating the Water Supply Line from the Refrigerator

1. Remove two water lines(gray one is for ice and the other one is for water)by pressing the coupler

and pulling the water line

away.

Reattaching the Water Supply Line

1. The Water Line must be fully Inserted to the center

of transparent coupler to prevent water leakage

from the dispenser.

2. Insert the 2 clips in the install pack and check that

each clip holds the line ﬁ rmly.

Do not cut the water line. Gently separate it from the coupler.

center of transparent coupler

clip A (1/4”)

(6.35mm)

Make sure the color of the

water lines match.

setting up _11

Removing the freezer door

A few things to mention ﬁ rst.

• Make sure that you lift the door straight up so the hinges are not bent or broken.

• Be careful not to pinch the water tubing and wire harness on the door.

• Place doors on a protected surface to prevent scratching or damage.

1. With the Freezer door closed, remove the upper hinge cover

using a screwdriver, and then

disconnect the wires by gently pulling them apart

2. Remove hinge screws

and the ground screw

by turning counter-clockwise, and take off

the upper hinge

. Be careful that the door does not fall on you as you are removing it

3. Next, remove the door from the lower hinge

by carefully lifting the door straight up

4. Remove the lower hinge

from the bracket

by gently

lifting the lower hinge upwards.

Reattaching the freezer doors

To reattach the freezer doors, replace parts in reverse order

01 SETTING UP

Be careful not to pinch

the water tubing and

wire harness on the

door.

Be sure to keep track of all

parts you are removing.

12_ setting up

Removing the Fridge Door

1. With the door closed, remove the upper hinge cover

using a screwdriver.

2. Remove hinge screws

and the ground screw

by turning counter-clockwise, and take off

the upper hinge

. Be careful that the door does not fall on you as you are removing it.

3. Remove the door from the lower hinge

by lifting the door

straight up

4. Remove the lower hinge

from the bracket

by gently

lifting the lower hinge upwards.

Reattaching the Fridge door

To reattach the fridge doors, replace parts in reverse order.

Be sure to keep track of all

parts you are removing.

setting up _13

01 SETTING UP

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can

make ﬁ nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

The front of the refrigerator is also adjustable.

Before levelling the refrigerator, remove the front leg cover

Open both the freezer and fridge doors, and then take off the front leg cover by turning the three

screws counter-clockwise.

When the Freezer part is lower than the Fridge part.

Insert a ﬂ at-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.

When the Fridge part is lower than the Freezer part.

Insert a ﬂ at-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise.

Refer to the next section for the best way to make very minor adjustments to the doors.

Fridge Leg

Screw Driver

Freezer Leg

Screw Driver

14_ setting up

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the

previous section on levelling the refrigerator.

When the door of the freezer is higher

than the fridge

In the case of the process to correct the imbalance is the same. Open the doors and adjust them,

one at a time, as follows:

1. Unscrew the nut

from the lower hinge until it reaches the upper end of the bolt

When you release the nut

, make sure that you use the Allen wrench provided

to loosen

the bolt

in a counter-clockwise direction. You should then be able to unscrew the nut

with

your ﬁ ngers.

2. Adjust the height difference between the doors by turning the bolt

clockwise or counter

clockwise

When you turn clockwise

, the door will move up.

3. After adjusting the doors, turn the nut

clockwise until it reaches the lower end of the

bolt, then tighten the bolt again with the wrench

to ﬁ x the nut in place

If you do not secure the nut ﬁ rmly, the bolt may release.

Wrench

Bolt

Nut

Adjustment part

Wrench

Bolt

Nut

Wrench

Bolt

setting up _15

CHECKING THE WATER DISPENSER LINE

A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better

health, the Samsung water ﬁ lter removes unwanted particles from your water. However, it does not sterilize or

destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20~125 psi (pound per square inch) is

required. Under normal conditions, a 170 cc (5.75 oz.) paper cup can be ﬁ lled in 10 seconds.

If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to

compensate for the low pressure.

Make sure the water storage tank inside the Refrigerator is properly ﬁ lled. To do this, press the water dispenser

lever until the water runs from the water outlet.

Water line installation kits are available at extra cost from your dealer. We recommend using a water supply

kit that contains copper tubing.

Connecting to the water supply line

1. First, shut off the main water supply line and turn the ice-maker off.

2. Locate the nearest cold, drinking water line.

3. After connecting the water supply with water ﬁ lter, turn on water supply and Flush 3 gallons through ﬁ lter

before use (ﬂ ush approximately 6 minutes)

01 SETTING UP

Cold water line

Pipe clamp

Water line installation kit

Shut off valve

16_ setting up

setting up your side-by-side refrigerator

INSTALLING THE WATER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection.

You may ﬁ nd these items sold as a kit at your local hardware store.

• 1/4” compression nut • plastic tubing

• copper tubing • ferrule

1. Connect the household water line to the assembled compression ﬁ tting.

- If you are using copper tubing, slip the compression nut

(not included) and ferrule (not included)

on copper tubing (not included) as shown.

- If you are using plastic tubing

, insert the molded end(Bulb) of the plastic tubing into the

compression ﬁ tting.

Do not use without the molded end(Bulb) of the plastic tubing

Tighten the compression nut onto the compression ﬁ tting. Do not over-tighten the compression nut .

3. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure

you get a snug, leak-free connection.

Installing the water ﬁ lter.

Before installing the water ﬁ lter, please remove the

top shelf.

1. Remove the water ﬁ lter cover(

)

2. Remove the ﬁ xed cap by turning it counter

clockwise. Keep the cap in a safe place for later use

if you don’t use a ﬁ lter.

3. Remove the water ﬁ lter from the box and put a

replacement indicator sticker on the ﬁ lter as shown.

Place a sticker on the ﬁ lter that dates six months

in the future. For example, if you install the water

ﬁ lter in March, put the “SEP” sticker on the ﬁ lter to

remind you to replace in September. That way you’ll

know when it is time to replace the ﬁ lter. Normally, a

ﬁ lter life is about 6 months.

CAUTION

Sticker

(month indicator)

nut

plasti

tubi

• ferrul

Compression nut

(1/4”) (Assembled)

Ferrule

(Not supplied)

Plastic tubing

(Assembled)

Compression ﬁ tting

(Assembled)

Bulb

Compression nut

(1/4”) (Not supplied)

Copper tubing or Plastic tubing

(Not supplied) (Not supplied)

Household water line

Refrigerator

setting up _17

4. Remove the ﬁ lter cap and insert the ﬁ lter

into the ﬁ lter housing.

5. Slowly turn the water ﬁ lter 90º clockwise

to align with the printing mark on the

cover, locking the ﬁ lter in position. Make

sure to align the water ﬁ lter label mark

with center of cover ﬁ lter printing as

illustrated. Remember, do not over-

tighten.

Removing any residual matter inside the water

supply line after installing ﬁ lter.

1. Turn ON the main water supply.

2. Press the Water button and push the dispenser pad.

3. Run water through the dispenser until the water runs clear (approx.

3L). This will clean the water supply system and remove air from the

lines.

4. Additional ﬂ ushing may be required in some households.

5. Open the refrigerator door and make sure there are no water leaks

coming from the water ﬁ lter.

A newly installed water ﬁ lter cartridge may cause water to brieﬂ y

spurt from the water dispenser. This is due to air getting into the

line. It should pose no problem to operation.

01 SETTING UP

Cover ﬁ lter

Align the indication

mark with lock position

Separation

of red cap

Water

Ice

operating the SAMSUNG side-by-side

refrigerator

Using the Control Panel / Digital Display

Power Freeze

Button

Speeds up the time needed to freeze products in the freezer. This can be

helpful if you need to quickly freeze items that spoil easily or if the temperature

in the freezer has warmed dramatically (For example, if the door was left open).

Freezer Button

Press the

Freezer button to set the freezer to your desired temperature. You

can set the temperature between 8°F and -14°F.

Energy Saver

For better energy efﬁ ciency, press the

Energy Saver

button. If condensation

occurs on the doors, turn the Energy Saver Button function off.

When you change the ﬁ lter, press and hold this button for 3 seconds to reset

the ﬁ lter schedule.

Lighting Button Press the Lighting button to turn on the dispenser LED lamp.

Fridge Button

Press the Fridge button to set the fridge to your desired temperature.

You can set temperature between 34

°F~46°F.

Power cool will operate when the temperature is set lower than 34

°F.

Ice Off Button

Press the Ice Off button to turn the ice making function off.

If press and hold this button for 3 seconds, all buttons will be locked. The Ice

Type button and the dispenser pad will not work either. To cancel this function,

press and hold this button again.

Ice Type Button Press the Ice Type button to choose cubed or crushed ice.

Water Button Press the Water button for water.

18_ operating

USING THE DIGITAL DISPLAY

“ Freezer Temp.” indicates the current Freezer temperature.

“ Fridge Temp.” indicates the current Fridge temperature.

When not in use the Display will turn off, this is normal.

Power Freeze

This icon will light up when you activate the “Power Freeze” feature. “Power Freeze” is great for times

when you need a lot of ice. When you have enough, just press the button again to cancel the “Power

Freeze” mode.

When you use this function the energy consumption of the refrigerator will increase. Remember

to turn it off when you don’t need it and return the freezer to your original temperature setting.

Energy Saver

This icon will light up when you activate the “Energy Saver” function. The Energy Saver function is

automatically set to “ON” when power is supplied to the Refrigerator. If condensation occurs on the

doors, turn the Energy Saver function off.

Alarm

This icon will be lit all the time. The door alarm will sound if any door is open for more than 2 minutes.

The beeping stops when you close the door. If you need to turn off the Alarm function, press the

Lighting and Fridge buttons for 3 seconds at the same time.

Lighting

This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light (under

the display) will be on constantly. If you would like the dispenser light to come on only when using the

dispenser, turn the “Lighting” feature off by pressing the “Lighting” button..

Power Cool

This icon will light up when you activate the “Power Cool” feature(refer to number 5, Fridge Button on

Page 18 to select this function). For a quick fridge cool down, use “Power Cool”. If you select “Power

Cool”, the inside temperature of the Fridge will decrease for about two and a half hours.

Filter Indicator

When the ﬁ lter indicator light changes to red, it is time to change the ﬁ lter. Typically this happens

about every 6 months.

The ﬁ lter Indicator will be Blue when you initially insert the water ﬁ lter.

The ﬁ lter Indicator will be purple when you have used your water ﬁ lter for 5 months.

The ﬁ lter Indicator will be Red when you have used your water ﬁ lter for 6 months.

After removing the old water ﬁ lter and installing a new one (see page 29 for instructions on how to do

this), reset the indicator status light by pressing the Ice off button for about 3 seconds.

Cubed Ice , Crushed Ice

Enjoy cubed or crushed ice by selecting your preference from the digital control panel. The ice type

light indicates the type of ice that is currently chosen.

Water

This icon will light up when you activate the “Water” feature.

operating _19

02 OPERATING

Ice Off

This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced.

When ICE OFF blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.

Child Lock

This icon will light up when you activate the “Lock” feature. In this case, you won’t be able to use the

control panel. If you press and hold the Ice Off/Hold button for 3 seconds, you will be able to use the

control panel again.

Cooling Off Mode (“OF & OF” code on the display)

This function is for store display refrigerators. It is not for customer use.

In case of Cooling Off Mode, the refrigerator works but doesn’t make cool air. To cancel

this mode, press the Power Freeze and Freezer buttons at the same time for 3 seconds

until a “Ding-dong” sound is heard and the unit will now cool

CONTROLLING THE TEMPERATURE

Basic Temperature of Freezer and Fridge

The basic and recommended temperature of Freezer and Fridge compartments are -4ºF/38ºF.

If the temperature of Freezer and Fridge compartments are too high or low, adjust the temperature

manually.

Controlling the Freezer temperature

The freezer temperature can be set between 8ºF and -14ºF to suit your particular needs. Press the

Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in

mind that foods like ice cream may melt at 4ºF.

The temperature display will move sequentially from 8ºF and -14ºF. When the display reac

hes 8ºF, it

will begin again at -14

ºF.

Controlling the Fridge temperature

The refrigerator temperature can be set between 46ºF and 34ºF to suit your particular needs. Press

the Fridge button repeatedly until the desired temperature is shown in the temperature display.

The temperature control process for the Fridge works just like the Freezer process.

Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin

tracking towards the newly set temperature. This will be reﬂ ected in the digital display.

- The temperature of the freezer or the refrigerator may rise from opening the doors too

frequently, or if a large amount of warm or hot food is placed in either side.

- This may cause the digital display to blink. Once the freezer and refrigerator return to their

normal set temperatures the blinking will stop.

- If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the appliance,

wait about 10 minutes and then plug back in.

CAUTION

20_ operating

Cooling Off

mode

Page is loading ...

Samsung RSG257AAWP User manual

Brand: Samsung

Model: RSG257AAWP

Category: Side-by-side fridge-freezers

Type: User manual

This manual is also suitable for

RSG257AARS

Download PDF

report

Samsung RSG257AAWP User manual

This manual is also suitable for

Samsung RSG257AAWP User manual

Related papers

Other documents