TFA Digital Wireless Rain Gauge MONSOON User manual

Brand: TFA

Model: Digital Wireless Rain Gauge MONSOON

Type: User manual

Kat. Nr. 47.3003

Gebrauchsanweisung

Instruction manual

Mode d’emploi

Istruzioni

Gebruiksaanwijzing

Instrucciones de uso

Diese Anleitung oder Auszüge daraus dürfen nur mit

Zustimmung von TFA Dostmann veröffentlicht werden. Die

technischen Daten entsprechen dem Stand bei Druckle-

gung und können ohne vorherige Benachrichtigung geän-

dert werden.

Die neuesten technischen Daten und Informationen zu

Ihrem Produkt finden Sie auf unserer Homepage unter Ein-

gabe der Artikel-Nummer in das Suchfeld.

EU-KONFORMITÄTSERKLÄRUNG

Hiermit erklärt TFA Dostmann, dass der Funkanlagentyp

47.3003 der Richtlinie 2014/53/EU entspricht. Der vollständi-

ge Text der EU-Konformitätserklärung ist unter der folgen-

den Internetadresse verfügbar:

www.tfa-dostmann.de/service/downloads/ce

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG

Zum Ottersberg 12, D-97877 Wertheim, Deutschland

No part of this manual may be reproduced without written

consent of TFA Dostmann. The technical data are correct at

the time of going to print and may change without prior

notice.

The latest technical data and information about this pro-

duct can be found in our homepage by simply entering the

product number in the search box.

EU declaration of conformity

Hereby, TFA Dostmann declares that the radio equipment

type 47.3003 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is avail-

able at the following Internet address:

www.tfa-dostmann.de/service/downloads/ce

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG

Zum Ottersberg 12, D-97877 Wertheim, Germany

La reproduction, même partielle du présent mode d'emploi

est strictement interdite sans l'accord explicite de TFA Dost-

mann. Les spécifications techniques de ce produit ont été

actualisées au moment de l'impression et peuvent être

modifiées, sans avis préalable.

Les dernières données techniques et des informations

concernant votre produit peuvent être trouvées en entrant

le numéro de l'article sur notre site.

Déclaration UE de conformité

Le soussigné, TFA Dostmann, déclare que l'équipement

radioélectrique du type 47.3003 est conforme à la directive

2014/53/UE. Le texte complet de la déclaration UE de

conformité est disponible à l'adresse Internet suivante :

www.tfa-dostmann.de/service/downloads/ce

www.tfa-dostmann.de

E-Mail : [email protected]

TFA Dostmann GmbH & Co.KG

Zum Ottersberg 12, D-97877 Wertheim, Allemagne

È vietata la pubblicazione delle presenti istruzioni o di parti

di esse senza una precedente autorizzazione della TFA

Dostmann. I dati tecnici corrispondono allo stato del pro-

dotto al momento della stampa e possono cambiare senza

preavviso.

È possibile trovare dati tecnici e informazioni aggiornate

sul prodotto inserendo il numero di articolo sul nostro sito.

Dichiarazione di conformità UE

Il fabbricante, TFA Dostmann, dichiara che il tipo di appa-

recchiatura radio 47.3003 è conforme alla direttiva

2014/53/UE. Il testo completo della dichiarazione di confor-

mità UE è disponibile al seguente indirizzo Internet:

www.tfa-dostmann.de/service/downloads/ce

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG

Zum Ottersberg 12, D-97877 Wertheim, Germania

Deze gebruiksaanwijzing of gedeelten eruit mogen alleen

met toestemming van TFA Dostmann worden gepubli-

ceerd. De technische gegevens van dit apparaat zijn actueel

bij het ter perse gaan en kunnen zonder voorafgaande

informatie worden gewijzigd. De nieuwste technische

gegevens en informatie over uw product kunt u vinden

door het invoeren van het artikelnummer op onze home-

page.

EU-conformiteitsverklaring

Hierbij verklaar ik, TFA Dostmann, dat het type radio-

apparatuur 47.3003 conform is met Richtlijn 2014/53/EU. De

volledige tekst van de EU-conformiteitsverklaring kan wor-

den geraadpleegd op het volgende internetadres:

www.tfa-dostmann.de/service/downloads/ce

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG

Zum Ottersberg 12, D-97877 Wertheim, Duitsland

Estas instrucciones o extractos de las mismas no pueden ser

publicados sin la autorización de la TFA Dostmann. Los

datos técnicos de este producto corresponden al estado en

el momento de la impresión y pueden ser modificados sin

previo aviso. Los actuales datos técnicos e informaciones

sobre su producto los puede encontrar bajo el número de

artículo en nuestra página web.

Declaración UE de conformidad

Por la presente, TFA Dostmann declara que el tipo de equi-

po radioeléctrico 47.3003 es conforme con la Directiva

2014/53/UE. El texto completo de la declaración UE de con-

formidad está disponible en la dirección Internet siguiente:

www.tfa-dostmann.de/service/downloads/ce

www.tfa-dostmann.de

E-Mail: [email protected]

TFA Dostmann GmbH & Co.KG

Zum Ottersberg 12, D-97877 Wertheim, Alemania

06/20

TFA_No_47.3003_Anl_06_20 22.06.2020 7:46 Uhr Seite 1

Page is loading ...

10 11

MONSUN – Wireless rain gauge



MONSUN – Wireless rain gauge



• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged.

Risk of explosion!

• Low batteries should be changed as soon as possible to prevent damage caused by

leaking. Never use a combination of old and new batteries together, nor batteries of

different types.

• Wear chemical-resistant protective gloves and safety glasses when handling leaking

batteries.



Important information on product safety!

• Do not place your product near extreme temperatures, vibrations or shocks.

• Protect the base station from moisture.

5. Elements

5.1 Receiver (Base station) Fig. 1

LCD

A1: Outdoor temperature

A2: Trend indicator

A3: Time

A4: Rain sensor

A5: Bar graph indication rainfall quantity

Buttons

B1: “▲ HISTORY” button

B2: “SET/RAIN” button

B3: “▼ SINCE” button

B4: “IN/OUT TEMP/SEARCH“ button

B5: “ALERT” button

B6: “MAX/MIN” button

B7: “RESET” button

Housing

C1: Wall mounting hole

C2: Battery compartment

C3: Stand (mountable)

5.2 Transmitter Fig. 2

D1: Battery compartment

6. Getting started

6.1 Base station

• Open the battery compartment and remove the battery insulation strip. Close the

battery compartment. Pull off the protective foil from the display.

6.2 Setting of the clock and calendar

• After batteries were inserted, or when holding “SET” button for 3 seconds, the 24 h

digit begins to flash. Press “▲” or “▼” button to choose 12 HR or 24 HR system.

Using “SET” button you can switch to setting hours, minutes, seconds, year,

month/day sequence, month, day, mm/inch, °C/°F and rain sensor alarm ON or OFF.

Thank you for choosing this instrument from TFA.

1. Before you start using it

• Please make sure to read the instruction manual carefully.

•

Following and respecting the instructions in your manual will prevent damage to your

instrument and loss of your statutory rights arising from defects due to incorrect use.

• We shall not be liable for any damage occurring as a result of not following these

instructions. Likewise, we take no responsibility for any incorrect readings and for

any consequences which may result from them.

• Please take particular note of the safety advice!

• Please keep this instruction manual for future reference.

2. Delivery contents

• Wireless rain gauge (base station)

• Transmitter (Cat.-Nr. 30.3161)

• Stand

• Batteries 5 x 1.5 V AA

• Instruction manual

3. Field of operation and all of the benefits of your new instrument at a glance

• Wireless transmission of outdoor temperature and rainfall quantity (433 MHz), dis-

tance range up to 30 m (free field), with temperature trend indicator

• Rain sensor with alarm

• Indication of total rainfall quantity, of the last hour, the last 24 hours and the last

rain with time and date of recording

• Bar graph indication and history of the last 7 days, weeks and months

• Indoor temperature

• Maximum and minimum temperature

• Programmable temperature alarm

• Clock with date

• Base station for wall mounting or table standing

• Very simple installation, no cables required

• Ideal for gardening and agricultural purposes and for all those who want to know

more about nature

4. For your safety

• This product is exclusively intended for the field of application described above. It

should only be used as described within these instructions.

• Unauthorised repairs, modifications or changes to the product are prohibited.

Caution!



Risk of injury:

• Keep these instruments and the batteries out of the reach of children.

• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is

swallowed, this can lead to serious internal burns and death within two hours. If you

suspect a battery could have been swallowed or otherwise caught in the body, seek

medical help immediately.

TFA_No_47.3003_Anl_06_20 22.06.2020 7:46 Uhr Seite 6

12 13

MONSUN – Wireless rain gauge



MONSUN – Wireless rain gauge



• Hold “HISTORY" button to recall the value of the current time period (current day,

week or month = 0). Press “HISTORY” button again to recall all single values (1 to 6).

• Press and hold “HISTORY” button and “SINCE” button for 3 seconds at the same

time to reset the memory completely.

7.2 Thermometer

7.2.1 Indoor outdoor temperature

• Press “IN/OUT TEMP/SEARCH” button to show indoor (INTEMP) or outdoor (OUTTEMP)

temperature.

7.2.2 Trend pointer

• The trend pointer displayed on the LCD indicates if the outdoor temperature is

increasing, steady or decreasing.

7.2.3 Maximum/Minimum function

• Press “MAX/MIN” button to show the maximum (MAX) and minimum (MIN) tempe-

rature of the indoor and outdoor sensor one after the other.

• Hold “MAX/MIN” button for 3 seconds to clear the recorded maximum and mini-

mum reading.

7.2.4 Temperature alert

• Press “ALERT” button to set the temperature alert function on or off. ( appears on

the LCD if this function is on).

• Hold “ALERT” button for 3 seconds to enter the Alert setting mode. Indoor tempera-

ture flashes. Press “▲” or “▼“ button to select indoor or outdoor temperature for

the temperature alert. Press ”ALERT” button to confirm the settings. Press “▲” or

“▼“ button to set the upper temperature limit (upwards arrow is flashing). Press

”ALERT” button to confirm the settings. Press “▲” or “▼“ button to set the lower

temperature limit (downwards arrow is flashing).

• When passing or falling below the selected temperature limit an alarm signal will

sound for 5 seconds and the temperature display begins to flash. The alarm signal

keeps on beeping every minute as long as the temperature is higher/lower than the

preset value (5 times maximum) or the “ALERT” button is pressed.

• Attention: Is the temperature within the preset limits the display stops flashing.

8. Positioning of base station and transmitter

• The outdoor sensor unit should be securely placed on a horizontal surface in an

open area. Avoid trees or other coverings where rainfall may be reduced causing

inaccurate reading.

• Place the base station at the final position. Avoid the vicinity of any interfering field

like computer monitors or TV sets and solid metal objects.

• Check the transmission of the signal from the transmitter to the base station (trans-

mission range 30 m free field), within ferro-concrete rooms, especially with metal

parts, the received signal is naturally weakened.

• If necessary choose another position for transmitter and/or base station.

• With the mountable leg the base station can be placed onto any flat surface or wall

mounted by the wall mounting hole.

9. Care and maintenance

• Clean the instruments with a soft damp cloth. Do not use solvents or scouring agents

• Remove the batteries if you do not use the products for a long period of time.

• In “month/day sequence” the two different date displays can be selected:

month/date (American version) or date/month (European version).

6.3 Reception of outdoor transmitter

• Open the battery compartment of the outdoor rain sensor with a screw driver and

insert the batteries (2 x 1.5 V AA), polarity as illustrated.

• The base station automatically starts scanning the 433 MHz signal to register the rain

sensor unit after setting time. The symbol flashes when the signal is received

successfully. If the reception of outdoor values fails, “- -“ appears on the display.

Check the batteries and try it again. Check if there is any source of interference.

• Manual initialization can be helpful. Hold “SEARCH” button on the base station for

3 seconds.

• After successful installation screw up the battery compartment of the transmitter

carefully.

7. How to operate

• Important: Buttons will not function while scanning the outdoor transmitter signal.

• During operation, all successful settings will be confirmed by an acoustical signal.

• The instrument will quit the setting mode, if there is no button used within

15 seconds.

• Holding “▲” or “▼” button, you will enter fast mode.

7.1 Rain gauge

7.1.1 Rain sensor alarm

• When it starts to rain an alarm signal will sound for 2 seconds and the symbol

begins to flash. Press any button to stop the alarm. The display stops flashing

30 minutes after the rain has finished.

• Set the acoustic rain sensor alarm on or off during setting mode (see 6.2). “AL ON →

AL OF”.

• appears on the display when alarm sound is activated.

7.1.2 Indication of date

• Press “SET/RAIN” button to show the date.

7.1.3 Indication of rainfall quantity

• Press "SET/RAIN" button again to show the following information:

• Indication of total rainfall quantity since the last reset. Hold “SET/RAIN” button for

3 seconds to clear the recorded reading.

• Rainfall quantity of the last hour (1H), update every 10 minutes.

• Rainfall quantity of the last 24 hours (24H), update every hour.

• Rainfall quantity of the last rain . The resetting happens with the start of new

rain.

7.1.4 Time and date of recording

• You can recall the time, date and year of recording for every value by pressing

“SINCE” button repeatedly.

7.1.5 Bar graph indication and history

• Press “HISTORY” button to show the bar graph indication of the rainfall quantities

for the last 7 days (DAILY), weeks (WEEKLY) and months (MONTHLY).

TFA_No_47.3003_Anl_06_20 22.06.2020 7:46 Uhr Seite 7

14 15

MONSUN – Wireless rain gauge



MONSUN – Wireless rain gauge



Please do not dispose of this instrument in household waste. The user is

obligated to take end-of-life devices to a designated collection point for the

disposal of electrical and electronic equipment, in order to ensure environ-

mentally-compatible disposal.

12. Specifications

Base station:

Measuring range

Indoor temperature: -10 °C… +50 °C (+14 °F…+122 °F)

Power consumption: 3 x 1.5 V AA (batteries included)

Dimensions: 94 x 25 (48) x 122 (130) mm

Weight: 114 g (only instrument)

Transmitter:

Measuring range

Outdoor temperatur: -50°C…+70°C (-58°F…+158°F)

Rainfall quantity: 0…9999 mm (0…999.9 inch)

Transmission frequency: 433 MHz

Maximum

radio-frequency power: < 10mW

Transmission range: max. 30 m

Power consumption: 2 x 1,5 V AA (batteries included)

Dimensions: Ø 132 x 160 mm

Weight: 247 g (instrument only)

• Please switch off the base station if you do not use it for a long period of time. Press

“RAIN” button and “SEARCH” button at the same time.

9.1 Battery replacement

• When the batteries in the outdoor sensor unit are used up, low battery icon appears

on the LCD of the base station.

• Open the battery compartment of the transmitter (screwed). Insert two new batter-

ies 1.5 V AA, observing the correct polarity.

• After successful installation tighten the screw of the battery compartment of trans-

mitter carefully.

• Please note: When the batteries are changed, the contact between transmitter and

receiver must be restored – so always insert new batteries into both units or start a

manual transmitter search.

10. Troubleshooting

Problems Solution

No indication ➜ Ensure that the polarity of the batteries is correct

at the base station ➜ Change the batteries

No transmitter reception ➜ Check batteries of external transmitter

Display “---“ (do not use rechargeable batteries!)

➜ Restart the transmitter and the base station according to

the manual

➜ Start manual search for the transmitter: Hold “SEARCH”

button on the base station for 3 seconds

➜ Choose another place for the transmitter and/or the base

station

➜ Reduce the distance between the transmitter and the

base station

➜ Check if there is any source of interference

Incorrect display ➜ Change the batteries

➜ Press the RESET button with a pin on the base station

11. Waste disposal

This product has been manufactured using high-grade materials and components which

can be recycled and reused.

Never dispose of empty batteries and rechargeable batteries in household

waste.

As a consumer, you are legally required to take them to your retail store or

to appropriate collection sites depending on national or local regulations in

order to protect the environment.

The symbols for the heavy metals contained are:

Cd=cadmium, Hg=mercury, Pb=lead

This instrument is labelled in accordance with the EU Waste Electrical and

Electronic Equipment Directive (WEEE).

TFA_No_47.3003_Anl_06_20 22.06.2020 7:46 Uhr Seite 8

Page is loading ...

TFA Digital Wireless Rain Gauge MONSOON User manual

Brand: TFA

Model: Digital Wireless Rain Gauge MONSOON

Type: User manual

Download PDF

report

in other languages

italiano: TFA Digital Wireless Rain Gauge MONSOON Manuale utente
français: TFA Digital Wireless Rain Gauge MONSOON Manuel utilisateur
español: TFA Digital Wireless Rain Gauge MONSOON Manual de usuario
Deutsch: TFA Digital Wireless Rain Gauge MONSOON Benutzerhandbuch
Nederlands: TFA Digital Wireless Rain Gauge MONSOON Handleiding

TFA Digital Wireless Rain Gauge MONSOON User manual

TFA Digital Wireless Rain Gauge MONSOON User manual

in other languages

Related papers

Other documents