NEC NEC L3H Quick start guide

Page is loading ...

2

EnglishEnglish

English

3

EnglishEnglish

English

Dear Customer,

Congratulations on the purchase of your new

notebook computer. We are sure it will be a

useful assistant in your professional tasks.

The world of computer science changes rapidly.

After releasing this Quick Start Guide, updates

may have been made to software or hardware

configurations. Therefore some of the instructions

in this guide may have to be changed slightly

and some of the pictures may vary slightly from

what appears.

This Quick Start Guide was designed to cover

the basics of the full range of our systems. Some

of the hardware or software mentioned in this

manual may not be included with your system.

Therefore you may find certain sections of the

guide irrelevant.

Should you have any questions or remarks

concerning the User’s Documentation, and you

have a valid Internet connection, please send us

an e-mail at the following address:

- nec.authors@nec-computers.com

Please do not use this e-mail address for

questions or remarks regarding your computer.

TT

T

aa

a

ble of Contentsble of Contents

ble of Contents

Copyright Notice ------------ 4

Safety Notices --------------- 5

Your Working Environment9

Setting up your Notebook

Computer ------------------- 11

System Controls ----------- 18

Function Keys ------------- 20

Tips and Techniques ------ 21

The Electronic Guide ---- 22

Trouble Shooting Guide - 24

Restoring your

Configuration -------------- 27

Smart Restore ------------- 31

Travelling with your

Notebook Computer ------ 34

Index ------------------------ 35

4

EnglishEnglish

English

Notebook Quick Start Guide, version L3H 1.0, 09/2001.

may be reproduced or transmitted, in any form or by any means, whether electronic, chemical, manual

or otherwise, including but not limited to photocopying, recording, or information storage and retrieval

systems, for any purpose without prior written permission of NEC Computers International.

DisclaimerDisclaimer

Disclaimer

NEC Computers International specifically disclaims all warranties, either express or implied, including

but not limited to implied warranties of merchantability and fitness for a particular purpose with respect

to this product and documentation. NEC Computers International reserves the right to revise or make

changes or improvements to this product or documentation at any time without obligation to notify any

person of such revisions or improvements.

In no event shall NEC Computers International be liable for any consequential or incidental damages,

including but not limited to loss of business profits or any other commercial damages, arising out of the

use of this product.

TT

T

rademarksrademarks

rademarks

Microsoft, MS-DOS, Windows NT and Windows are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

Intel and Pentium are registered trademarks and Celeron is a trademark of Intel Corporation in the

United States and other countries.

NEC and Packard Bell are registered trademarks of NEC Computers International.

All other company or product names are trademarks, registered trademarks or service marks of their

respective owners.

CE StatementCE Statement

CE Statement

This equipment has been designed to comply with the requirements for CE Marking, pertaining to

products intended for sale within the European Union.

Copyright NoticeCopyright Notice

Copyright Notice

5

EnglishEnglish

English

Regulatory InformationRegulatory Information

Regulatory Information

European Notice

Products with the CE marking comply with both the Electromagnetic

Compatibility Directive (89/336/EEC) and the Low Voltage Directive (72/

23/EEC) - modified by the Directive 96/68/ECC - issued by the Commission

of the European Community.

Compliance with these directives implies conformity to the following Euro-

pean Standards:

ã EN55022: Radio Frequency Interference

ã EN55024: Immunity Characteristics

ã EN6100-3-2: Limits for harmonic current emissions

ã EN6100-3-3: Limitation of voltage fluctuation and flicker in low-volt-

age supply system

ã EN60950: Product Safety - The cordless controllers used by your equip-

ment include radiofrequency transmitters. This equipment is covered

by the R&TTE (Radio & Telecommunications Terminal Equipment)

directive (1995/95/EC). The controllers are classified as Class 2 de-

vices, qualified for use within the following countries: United-King-

dom, France, Belgium, The Netherlands, Germany, Austria, Italy, Greece,

Spain, Denmark, Sweden and Norway.

If your computer includes a telecommunication network board, the input/

output socket is classified as Telecommunication Network Voltage (TNV-3)

FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions:

ã This device may not cause harmful interference and,

ã This device must accept any interference received, including interfer-

ence that may cause undesired operation.

Modifications to the Product

ä CE Marking

NEC Computers International cannot be held responsible for

modifications made by the User and the consequences thereof, which

may alter the conformity of the product with the CE Marking.

Safety NoticesSafety Notices

Safety Notices

6

EnglishEnglish

English

ä Radio Frequency Interference

The manufacturer is not responsible for any radio or TV interference caused

by unauthorised modifications to this equipment.

Connections

ä PELV (Protected Extra Low Voltage)

To ensure the extra-low voltage integrity of the equipment, only connect

equipment with mains-protected electrically-compatible circuits to the

external ports.

ä SELV (Safety Extra Low Voltage)

Every input and output of this product is classified as Safety Extra Low

Voltage.

ä Building Supply

Only connect the equipment to a building supply that is in accordance

with current wiring regulations in your country. In the U.K., those are the

IEE regulations.

AC Adapter

Always plug the AC adapter cord into an easily accessible outlet. It is impor-

tant to be able to easily shut off power to the computer by unplugging the AC

adapter.

Under no circumstances should the user attempt to disable the AC adapter.

The AC adapter has no user-replaceable parts. Inside the AC adapter are

hazardous voltages that can cause serious personal injury. A defective AC adapter

must be returned to your dealer.

Batteries

ä Replacing Batteries

A lithium battery in some computers maintains system configuration in-

formation. In the event that the battery fails to maintain system configura-

tion information, we recommend that you replace the battery. For battery

replacement information, call your dealer or your Customer Assistance

Centre.

WARNING: there is a danger of explosion if the battery is

incorrectly replaced. Replace only with the same or equivalent

type recommended by the manufacturer.

Safety NoticesSafety Notices

Safety Notices

7

EnglishEnglish

English

ä Battery Disposal

Ultimate disposal of the batteries should be handled according to all na-

tional laws and regulations. Do not place used batteries in your regular

waste: the incineration, landfilling or mixing of batteries with the munici-

pal solid waste stream is prohibited by law in most countries. Contact

your local waste management officials for other information regarding the

environmentally sound collection, recycling, and disposal of the batteries.

Laser Compliance Statement

The optical devices installed in your computer is designed for use solely as a

component of such electronic product and therefore does not comply with

the appropriate requirements of Code of Federal Regulation Sec. 1040.10

and Sec. 1040.11 for COMPLETE laser products.

Thunderstorm Warning

In thunderstorm conditions, make sure that you disconnect your modem

from the telephone line. A lightning strike to nearby telephone lines could

damage your modem or even your whole computer system. Please note that

the product warranty does not apply if damage to your computer is the result

of a lightning strike.

Care and HandlingCare and Handling

Care and Handling

Use the following guidelines to properly handle and care for your notebook.

Protect the notebook from extremely low or high temperatures. Let

the notebook warm (or cool) to room temperature before using it.

Keep the notebook away from magnetic forces. (Some airline tray

tables are magnetic, do not set your notebook on top of it. Doing so

can destroy the data on your hard disk drive.)

Keep the notebook dry. Do not wash the notebook with a wet cloth

or pour fluid into it.

Check the notebook for condensation. If condensation is present,

allow it to evaporate before switching on the notebook.

Protect the notebook from being bumped or dropped.

Keep the notebook away from dust, sand, and dirt.

Safety NoticesSafety Notices

Safety Notices

8

EnglishEnglish

English

WARNING - Avoid Electrostatic Discharge!WARNING - Avoid Electrostatic Discharge!

WARNING - Avoid Electrostatic Discharge!

ESD can damage disk drive, cards, memory modules and other parts. We

recommend that you follow all the procedures described in the electronic

User’s Guide only when at an ESD workstation. If one is not available, pro-

vide some ESD protection by wearing an antistatic wrist strap attached to any

unpainted metal surface when handling parts. If you don’t have one, dis-

charge static electricity from yourself and your clothing by touching a nearby

metal surface before handling any internal components. (You will need to

maintain continuous contact with the metal surface during the procedure.)

Epilepsy warningEpilepsy warning

Epilepsy warning

Some people are susceptible to epileptic seizures or loss of consciousness

when exposed to certain flashing lights or light patterns in everyday life.

Such people may have a seizure while watching television or computer im-

ages. This may happen even if the person has no medical history of epilepsy

or has never had any epileptic seizures. If you or anyone in your family has

ever had symptoms related to epilepsy (seizures or loss of consciousness)

when exposed to flashing lights, consult your doctor prior to using your

computer.

If you experience any of the following symptoms: dizziness, blurred vision,

eye or muscle twitches, loss of consciousness, disorientation, any involuntary

movement or convulsion while using your computer, IMMEDIATELY dis-

continue use and consult your doctor.

Virus warningVirus warning

Virus warning

We guarantee that this product is 100% virus free. Please take the following

precautions to protect your system against new viruses:

ä Do not use illegal copies of software protected by copyright.

ä Check all floppy disks carefully using a virus scanner before you start

using them.

ä When your computer is connected to a network, please make sure that

only authorised persons have access to your system. For example, you can

use passwords and share files as Read Only.

Safety NoticesSafety Notices

Safety Notices

9

EnglishEnglish

English

Please consider the following suggestions when setting up a comfortable work area.

Arrange Your Equipment

Arrange your equipment so that you can work in a natural and relaxed posi-

tion. Place items that you use frequently within easy reach. Adjust your

workstation setup to the proper height by lowering the table or stand that

holds your computer equipment or raising the seat height of your chair. Po-

sition your notebook computer directly in front of you for increased safety

and comfort.

Adjust Your Chair

Your chair should be adjustable and stable. Vary your posture throughout the

day. Keep your body in a relaxed yet upright position. Use the entire seat and

backrest to support your body. The angle formed by your thighs and back

should be 90° or more. Place your feet flat on the floor.

Adjust Your Input Devices

Position your keyboard directly in front of you. Adjust the keyboard height

so that your elbows are near your body and your forearms are parallel to the

floor. If you use a mouse, position it at the same height as the keyboard and

next to the keyboard. Type with your hands and wrists floating above the

keyboard. Keep from bending your wrists, hands and fingers sideways.

Adjust Your Screen or Monitor

Correct placement and adjustment of the screen or external monitor can

reduce eye, shoulder and neck fatigue. Adjust the height of your screen or

external monitor so that the top of the screen is at or slighly below eye level.

Your eyes should look slightly downward when viewing the middle of the

screen. Position your screen no closer than 30 centimeters and no further

away than 70 centimeters from your eyes. The optimal distance is between 35

and 45 centimeters.

Vary Your Workday

Vary your tasks throughout the day. Take frequent short breaks that involve

walking, standing and stretching.

YY

Y

our our

our

WW

W

orking Enorking En

orking En

vironmentvironment

vironment

10

EnglishEnglish

English

Some disorders of the hands, wrists, arms, neck, shoulders, legs

and back may be associated with or aggravated by certain re-

petitive actions. To reduce your risk of developing these disor-

ders, type with your wrists straight and your hands and wrists

floating above the keyboard and avoid resting your wrists on

sharp edges.

If you experience periods of pain, tingling, numbness or other

discomfort, please contact your doctor.

YY

Y

our our

our

WW

W

orking Enorking En

orking En

vironmentvironment

vironment

11

EnglishEnglish

English

Booting fBooting f

Booting f

or the For the F

or the F

irst irst

irst

TimeTime

Time

Your notebook is easy to use right out of the box. Use the pictures on the

inside cover page to locate the connectors and buttons and follow these steps:

¬ Connect the AC adapter cable into the power port (

) on the right

side of the notebook.

 Plug the AC adapter cable into the adapter and connect to a grounded

wall outlet.

® Locate the latch on the front of the LCD panel. Slide the latch to the right

and raise the panel to open the notebook.

¯ Press the power button to power on.

When using the AC adapter, make sure the power source falls

within the system’s compatible range of 100-240 volts AC.

Never use the AC adapter if the voltage falls outside of this

range (watch for this when travelling to other countries).

Once all connections have been made, you are ready to begin. For a success-

ful installation procedure, we recommend you use the AC power the first

time you use your notebook computer.

LimitationsLimitations

Limitations

Your system may have been shipped with a dual configuration

whereby you can choose between Windows 2000 and Windows NT.

Before making your choice, please take into account the follow-

ing information.

DVD Software under Windows NT

By choosing Windows NT, you will be unable to use the DVD Video (MPEG-

2) functions offered by your DVD software utility (provided on a separate

CD-ROM). However, you will still be able to read non-DVD video discs.

The DVD software utility will function correctly if you choose Windows 2000

or if your system runs under Windows 98.

Wireless LAN Connection under Windows NT

If your system is equipped with a wireless LAN card, please note that

Windows NT does not support wireless LAN connections. But it will function

correctly if you choose Windows 2000 or if your system runs under

Windows 98.

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

12

EnglishEnglish

English

IEEE 1394 Ports under Windows NT

Your system is equipped with two IEEE1394 ports located on the back of the

notebook. AS Windows NT does not support IEEE1394 technology, you

cannot use these ports to connect IEEE 1394 devices. But they will function

correctly if you choose Windows 2000 or if your system runs under

Windows 98.

Automatic Mail Receiving Utility under Windows NT

The Automatic Mail Receiving Utility allows you to set a time-table for check-

ing e-mail or changes to web sites. This utility is only available on systems

running under Windows 98 or Windows 2000.

We are sorry for any inconvenience caused by these technical limitations.

WindWind

Wind

oo

o

ws NT - ws NT -

ws NT -

WindWind

Wind

oo

o

ws 2000 Setupws 2000 Setup

ws 2000 Setup

Before making your choice , read carefully the limitations de-

scribed earlier in this manual.

Some sytems are shipped with a dual configuration whereby you can choose

between Windows 2000 Professional Edition and Windows NT4 Workstation

operating systems. The first time you switch your computer on, a dialogue

box appears allowing you to choose the operating system you want to install

on your computer (this is not the case of computers shipped with Microsoft

Windows 98). Using the arrow keys, select Windows NT or Windows 2000

and press Enter. On the second screen, confirm your choice by selecting Ye s

and press Enter.

Please note that your choice of operating system is permanent.

The operating syetem that is not selected will be permanently

erased from your hard drive.

Windows NT

The first phase is the installation process and does not require your

intervention.The second phase is the configuration process which starts with

the Windows NT Setup screen. During this phase, you will be asked to enter

your name, company and a Product ID number. The Product ID number can

be found on the base of your notebook, on the Microsoft

Certificate of

Authenticity sticker. When prompted, accept the Microsoft License Agree-

ment by checking the white dot in front of “I accept the agreement”.

During this configuration process, your system will be restarted automati-

cally.

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

13

EnglishEnglish

English

After your system has been set up correctly, the Windows desktop appears on

your screen. This means that Windows NT has been properly installed.

Before you start using your system, you should select your recovery

process. See “NEC Recovery Menu” later in this chapter.

Windows 2000

The first phase is the installation process and does not require your interven-

tion. The second phase is the configuration process which starts with the

Windows 2000 Setup screen. Follow any instructions given by the Windows

2000 Setup wizard. When prompted, accept the Microsoft License Agree-

ment by checking the white dot in front of “I accept the agreement”. This

wizard will also help you define the network settings and the network iden-

tification information (passwords, who can access the computer, etc..).

During this configuration process, your system will be restarted automati-

cally.

After your system has been set up correctly, the Windows desktop appears on

your screen. This means that Windows 2000 has been properly installed.

Before you start using your system, you should select your recovery

process. See “NEC Recovery Menu” later in this chapter.

Windows 98 SetupWindows 98 Setup

Windows 98 Setup

The first time you switch your notebook on, you will be asked to enter your

name and company. When prompted, accept the Microsoft License Agreement

by checking the white dot in front of “I accept the agreement”.

Your notebook has already been setup in the factory to best reflect the installed

components. The Welcome to Windows 98 dialogue box will appear on your

screen.

Before you start using your system, you should select your recovery

process. See “NEC Recovery Menu” later in this chapter.

NEC Recovery MenuNEC Recovery Menu

NEC Recovery Menu

The following section contains detailed instructions needed to set up your

NEC Recovery Process.

ä First you should read carefully the chapter “Selecting Your Recovery Process”

and set up your NEC Recovery Process.

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

14

EnglishEnglish

English

ä Later, if you ever need to either restore your system to its initial installa-

tion state or to reinstall software or hardware components, follow the

instructions provided in the relevant chapters (Restoring your Configuration

and Smart Restore) later in this guide.

Selecting your Recovery ProcessSelecting your Recovery Process

Selecting your Recovery Process

Your computer is supplied with a Backup Partition on the hard disk drive

which contains all data you may need in order to restore your configuration

as it was when leaving the factory. This partition occupies about 1.5 to 2 GB

of your hard disk drive.

This backup partition is hidden, but can be tempered with us-

ing the FDisk (Windows 98) or Disk Management (Windows

2000/Windows NT) utilities. Do NOT erase the partition with

these utilities.

The NEC Recovery Menu allows you to choose the way you will restore

your system and to create the necessary tools. Access the NEC Recovery

Options Menu by clicking the Start button, selecting Programs, then Tools

and clicking NEC Recovery Menu.

You should disable your anti-virus program before using the

NEC Recovery Menu.

This menu presents four options:

ä Leave your system as it is, with the backup partition on the hard disk drive

(Default).

ä Transfer the contents of the backup partition to a self-made recovery CD

(this option requires a CD-R or CD-RW drive installed on your system),

allowing you to restore your system from a CD.

ä Transfer the contents of the backup partition to your network (this option

requires a valid LAN connection on your system), allowing you to restore

your system from the network .

ä Erase the contents of the backup partition completely to free space on

your hard disk drive.

1. Use the Backup Partition (Default)

Leave the backup partition as it is. For the full recovery process, boot on the

recovery media supplied with your system, either a bootable floppy disk or

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

15

EnglishEnglish

English

CD-ROM. With this option, the Backup Partition remains on your hard disk

drive, occupying about 1.5 to 2 GB.

2. Create Master CDs from Backup Partition

This option won’t appear if no CD-RW drive is installed on

your system. The first time you install a CD-RW drive in your

system, you will have to use Smart Restore (see this chapter

later in this guide) to install the Prassi Primo DVD and Mas-

ter CD Creator programs before being able to use this option.

If you install a very recent CD-RW drive, it may not be recog-

nised by your version of Prassi Primo DVD. In this case,

download from the Prassi web site (

www.prassieurope.com, Px

Engine update section) the latest update for your Prassi prod-

uct.

This option will copy the contents of the backup partition to a self-made

Master CD and free up the space on your hard disk drive. The backup parti-

tion is automatically deleted from your hard drive following the transfer. How-

ever, as long as the transfer has not been completed successfully, the backup

partition is not erased.

This option will run the Master CD Creator program. It requires a CD-RW

drive and a blank recordable CD; DO NOT USE A CD-RW.

During the whole process, do not shutdown the computer nor

run any other programs. Make sure that your anti-virus soft-

ware, screen saver and energy saving mode are deactivated.

¬ Click the Create Master CDs from Backup Partition button to begin

the procedure. The system will reboot, the Master CD Creator program

will be launched and a warning window will appear.

 Please read the information contained in this window carefully and click

the OK button to continue.

® Insert a blank recordable CD and click OK when prompted.

¯ When the writing process is complete, the program will automatically

eject the CD; click the OK button to continue.

° Finally, the program will check the Master CD for errors. When prompted,

insert the Master CD into the CD-RW drive (close the CD-RW drive

tray) and click the OK button to continue.

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

16

EnglishEnglish

English

± This test takes several minutes. When the test is complete and successful,

the message “The Master CD was successfully created” is displayed.

² Remove the Master CD from the CD-RW drive and click the OK button

to continue.

³ Label your Master CD. Use a permanent pen to write on the CD’s label

side. DO NOT USE STICKERS ON THE CD FACES.

Store your Master CD in a safe place. It now contains the

backup data of your computer. The Master CD is mandatory to

use NEC utilities such as Smart Restore and the Recovery

Program (Refer to these sections later in this guide).

3. Network Recovery from Backup Partition (only if your notebook is equipped

with a floppy disk drive and a LAN card)

This option will copy the contents of the backup partition onto a directory

on the network (this procedure requires a valid LAN connection on your

system). The backup partition is automatically deleted from your hard drive

following the transfer. However, as long as the transfer has not been com-

pleted successfully, the backup partition is not erased.

This option should only be used by a Network Administrator.

While preparing this recovery process, you will need to update

the network boot floppy relevant to your network. Make sure

you have one ready before you start.

Click the Network Recovery from Backup Partition button to begin

the procedure. You will first be prompted to define a logical drive on your

network, onto which the backup partition will be copied. Follow the on-

screen instructions carefully, and click OK when you’re done. You will then

be prompted to insert a network boot floppy in the floppy disk drive, click

OK when done. Remove the floppy disk when prompted to do so, and click

OK. The files should be copied in approximately 20 minutes. Label this floppy

disk “Network Recovery Boot Floppy”.

We advise you to make a backup copy of this boot floppy and

keep it in a safe place because there is no way to re-create it.

During this procedure, the start menu shortcut for Smart Restore will be

automatically updated. Do not delete this shortcut because it is the only way

to launch SmartRestore. NEC advises you to note the updated path. To do so,

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

17

EnglishEnglish

English

select Start, Programs, Tools and point to NEC Recovery Menu. Right

click this menu option. In the drop down list, click Properties. Note the

path displayed in the Target area.

If you need the DOS drivers for the LAN card that was in-

stalled at the factory in your notebook computer, you can find

them in the following directory: C:\APPS\Lan.dos.

4. Erase Backup Partition

This option will simply erase the 1.5 to 2 GB Backup Partition and make this

space available for your data. It will not create any tool to restore your

system.

Before using this option, we recommend you to either create a

copy of the backup partition on a Master CD or on a network

drive.

When selecting this option, a new window will be displayed with two buttons:

ä With Network: If you choose this option, the system will assume that a

copy of the Backup Partition already exists on the network and will ask

you to select the mapped network drive where the backup partition has

been saved.

This button can be used in the following situation: you have for instance

ten identical systems connected to your network. Use the Network Recov-

ery from Backup Partition option on one of those systems to copy the backup

partition on a mapped drive on your network. Erase the Backup Partition

on the nine other systems using the With Network button as described in

this section. If you need to restore the whole configuration or only some

software or hardware elements of one or several of the ten systems, launch

the Recovery Program or Smart Restore. These programs will use the

Network Backup Partition you created.

ä Without Network: If you choose this option, the program will assume

that you intend to use a Master CD to restore your system. Next time you

will use the Recovery Program or Smart Restore, you will be prompted

to insert the Master CD.

This is the option to use if you want to free some space on your

hard disk drive and plan to never use the Recovery Program or

Smart Restore.

Setting up your Notebook ComputerSetting up your Notebook Computer

Setting up your Notebook Computer

18

EnglishEnglish

English

The Versa notebook uses status lights marked with icons to communicate

power status and operating status.

Power Status LEDsPower Status LEDs

Power Status LEDs

Power Status LEDs indi-

cate your Versa‘s current

power status.

Power Status LED

(A)

- Lights green when the

system power is on.

- Blinks green when the

system is in Standby

mode.

- Lights yellow (blinks

when in Standby

mode) to indicate that

battery power is at 8%

capacity or less.

- Lights amber (blinks

when in Standby mode) to indicate that battery power is at 3% capacity or

less.

Battery Charging LED (B)

- Lights amber when the primary battery is charging. Blinks amber to indi-

cate an error. The primary battery is installed in the battery bay.

- Lights green when the secondary battery is charging. Blinks green to indi-

cate an error. The secondary (optional) battery is housed in the Modular Bay

slot.

Operating Status LEDsOperating Status LEDs

Operating Status LEDs

Operating status LEDs keep you informed of your Versa's current operating

status.

Email Notification LED (C) - some systems have an LED that lights when

new email is received.

Hard Drive Access (D) - lights when the Versa accesses the hard disk drive,

or a drive installed in the VersaBay IV.

System ControlsSystem Controls

System Controls

19

EnglishEnglish

English

Modular Bay Drive Access (E) - lights when the Versa writes data to or

retrieves data from the diskette drive or other device in the Modular Bay.

Caps Lock (F) - lights when caps lock is in effect.

Scroll Lock (G) - lights when scroll lock is in effect.

Num Lock (H) - lights when num lock mode is active.

Security Indicator (I) - lights green when the system is in security mode

(not supported on all systems).

System ControlsSystem Controls

System Controls

20

EnglishEnglish

English

Function keys are found at the top of the keyboard. These key combinations

perform system-specific functions.

ä Fn-F2 - Toggles a wireless device on and off (in systems with wireless

LAN).

ä Fn-F3 - Toggles the video mode between LCD only, CRT only, Simulta-

neous mode and TV-Out.

ä Fn-F4 - Sets standby power management on (Windows NT only).

ä Fn-F5 - Zooms the screen in or out slightly.

ä Fn-F6 - Toggles the system beep off and on.

ä Fn-F7 - Toggles between various power management levels in Windows

NT. Beeps indicate the level chosen as follows:

- 1 beep: Off

- 2 beeps: Custom

- 3 beeps: Highest performance

- 4 beeps: Longest life

No function when Windows 98/2000 is configured for Advanced Configuration

and Power Interface (ACPI).

ä Fn-F8 - Increases the LCD panel’s brightness.

ä Fn-F9 - Decreases the LCD panel’s brightness.

Function KeysFunction Keys

Function Keys

21

EnglishEnglish

English

TT

T

o Prolong Battery Lifeo Prolong Battery Life

o Prolong Battery Life

ä Enable power management features. (Refer to the section “Managing Sys-

tem Power” in the electronic User’s Guide.)

ä Put the system in Suspend (Windows NT) or Standby (Windows 98/

2000) mode if you must leave for a short time.

ä Turn off the system when you finish using it.

ä Launch the battery refresh utility regularly. (Refer to the section “Exit

Menu” in the electronic User’s Guide.)

ä Set LCD brightness to the lowest comfortable setting.

ä Remove PC cards when not in use.

What to do on Low BatteryWhat to do on Low Battery

What to do on Low Battery

ä Power off the system, remove the battery pack and replace it with a fully

charged battery.

ä Leave the battery pack in the system and connect your notebook to the AC

adapter and a wall outlet.

ã When the system is off, or in Standby/Suspend mode and the AC adapter is

connected, charge time is approximately 3 hours.

ã When the system is powered on and the AC adapter is connected, charge

time is approximately 4 hours.

Tips and Tips and

Tips and

TT

T

echniquesechniques

echniques

Page is loading ...

NEC NEC L3H Quick start guide

NEC NEC L3H Quick start guide

in other languages

Related papers

Other documents