Zealot B5 Quick start guide

Brand
Zealot
Model
B5
Category
Bluetooth music receivers
Type
Quick start guide

Zealot B5 is a wireless Bluetooth headphone with a 3.7V working voltage and a 32Ω loudspeaker. It has a transmission distance of 10m and a working current of 50mA. The headphone has a built-in microphone and supports answering and rejecting phone calls. It also has a mode button that allows you to switch between Bluetooth, TF card, and AUX modes. The headphone has a volume control and a pause/play button. It also has a next track and previous track button. The headphone has a built-in battery that can be charged using the included charging cable. The headphone has a built-in LED indicator that shows the battery level and the current mode.

Zealot B5 is a wireless Bluetooth headphone with a 3.7V working voltage and a 32Ω loudspeaker. It has a transmission distance of 10m and a working current of 50mA. The headphone has a built-in microphone and supports answering and rejecting phone calls. It also has a mode button that allows you to switch between Bluetooth, TF card, and AUX modes. The headphone has a volume control and a pause/play button. It also has a next track and previous track button. The headphone has a built-in battery that can be charged using the included charging cable. The headphone has a built-in LED indicator that shows the battery level and the current mode.

Wireless
Headphone
QUICK START GUIDE
1.Before charging please check whether the charger model is suitable for
this product.
2.Do not use the product when charging, we suggest to charge the headp-
hone once at least every month.
3.Do not throw this product into water or fire.
4.Do not use this product when driving.
Charge the headphone
Inserting charging line which with headphone, insert one end into the 5v
power adapter, USB port or computer USB port on the battery, the red
light is on when charging , until the red light off, indicating that the
battery is full.
Startup
Low battery reminder
When there is "click" sound means battery electricity is insufficient, need
to recharge
Keep using around your mobile phone
How to reconnect
Bluetooth works between your phone and headphone, which is the straight
line without blocking range about 10 meters, beyond this distance it may
appear to decline in sound quality and lost connection.
1. Your Headphone will try to reconnect to your device.
2. If your headphone is in the paring mode, and it doesn't try to reconnect to
your device, please connect to your devices manually.
English Wireless bluetooth Headphone
Warm prompt
Note
01
English Wireless bluetooth Headphone
M
A
U X
D
C
Volume+
Pause/play
Volume-
Charging port
Power on/off button
Audio port
Mode button
Next
Mic.
Previous
Call button
Indicator light
Connection graph
02
Loudspeaker: 32Ω Charging voltage: 3.7v
Frequency response: 20HZ-20KHz Transmission distance: 10m
Working current : 50mA SNR: 80Db
Weight: 241g Working voltage: 3.7v
Dimension：160*84*190mm Distoration：＜1%
OFF
O N
On-off key
OFF: power off ON：turn on
Short press: Move Previous / previous channel
Long press: fast backward
M
Mode key
Short press : mode switch ( Bluetooth, TF)
Short press: next / next channel
Long press: fast forward
Short press: volume -
Short press : play / suspend
Short press: volume +
Move previous key
Move Next one key
Volume- button
Suspend / play key
Volume+ button
Phone button
Short press : answer phone
Long press: refuse phone
Double-click: back to dial the phone
English Wireless bluetooth Headphone
Product specification
Instruction
① Button introduction
03
1. Bluetooth mode: To switch to "ON" blue lights glisten, enter into the
bluetooth connection mode, hear a warning sound at the same time,
search for "B5" and click connection, and after successful connection will
hear a warning sound, press” “key can play music at this time.
2. TF card mode: insert TF card will play TF audio file immediately, the
yellow indicator light flash slowly at the same time, the blue indicator light
in quick flash condition. .
3 AUX mode : when in power off condition, , insert 3.5 audio line can
play MP3 mobilephone, computer audio music, etc.
English Wireless bluetooth Headphone
② Operating instruction
hear a warning sound at
the same time, search for
"B5" and click connection.
To switch to "ON" blue lights
glisten, enter into the
bluetooth connection mode.
B5
OFF
ON
Press the key can play
music at this time.
04
Problem
Possible reasons
Solution
Bluetooth headphone can not
be turned on
The battery of headphone is too low
Please charge your BT headphone
There is connection between
headphone and our cellphone
The bluetooth connection is off
Please turn on your cellphone’s
bluetooth, and turn on your BT
headphone.
Cellphone can not get BT
headphone
Bluetooth headphone is not in
pairing mode, pairing mode only
lasts 10 mins.
Set BT headphone in pairing
mode according to above
instruction
Maybe pairing is reset or it is
connected to other devices.
Set it up in paring mode according
to above instructions.
Can not realize Redail function
Your cellpohne maynot support this
function
Your BT headphone is well
connected to your cellphone,
but you can only play the
music in our cellphone.
There maybe a speaker and
earphone options for you to choose
in cellphone.
Check how to transfer your music
to your earphone A/V earphone,
A2DP, BT Stereo eaphone.
The sound quality is bad when
you are talking with others via
BT earphone.
HSP/HFP your cellphone is not
compatible with A2DP and only
support mono HSP/HFP.
Check compatibility of your
cellphone.
The answer to Question
English Wireless bluetooth Headphone
05
Extremely loud music can drown out sound
of traffic or other danger signals.
Make sure you can always hear what is going
on around you.
PRECAUTIONS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Zealot B5 Quick start guide

Brand
Zealot
Model
B5
Category
Bluetooth music receivers
Type
Quick start guide

Zealot B5 is a wireless Bluetooth headphone with a 3.7V working voltage and a 32Ω loudspeaker. It has a transmission distance of 10m and a working current of 50mA. The headphone has a built-in microphone and supports answering and rejecting phone calls. It also has a mode button that allows you to switch between Bluetooth, TF card, and AUX modes. The headphone has a volume control and a pause/play button. It also has a next track and previous track button. The headphone has a built-in battery that can be charged using the included charging cable. The headphone has a built-in LED indicator that shows the battery level and the current mode.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents