CBTL 10134 Instruction book

Brand: CBTL

Model: 10134

Category: Coffee making accessories

Type: Instruction book

CBTL

is an easy to use,

elegant, single serve beverage

system, based on the proprietary

CAFFITALY SYSTEM, that allows

you to enjoy all the pleasures of

an authentic The Coffee Bean

& Tea Leaf

café beverage at

home. One capsule is all you

need to create a single serving

to savor. One touch is all it

takes to brew fresh, fragrant

and flavorful espresso, brewed

coffee or tea. One taste is

enough to transport you to

a moment of comfort—the

comfort of one perfect cup.

One touch.

One perfect cup

™

Capsule Machine

Instruction Book

Single Serve Beverage System

SINGLE SERVE BEVERAGE SYSTEM

AMERICANO

Model 10134

Table of contents

Important Safeguards _ _ _ _ _ _ _ _ _ _ _ _ _ _3

Additional Important Safeguards _ _ _ _ _ _ _ _ _4

Intended Use - Household Use Only _ _ _ _ _ _ _ _4

Key to Symbols _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _5

Description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _6

1- Before the First Use: Prime the Pump _ _ _ _ _ _7

2- Brewing Beverages _ _ _ _ _ _ _ _ _ _ _ _ _ _8

3- Water Tank Dry Protection Alarm _ _ _ _ _ _ _ 11

4- Raised Capsule Lever Safety Alarm _ _ _ _ _ _ 11

5- Power Energy Saving: Sleep Mode _ _ _ _ _ _ _ 12

6- User Maintenance Instructions _ _ _ _ _ _ _ _ 12

7- Daily Maintenance _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12

8- Descaling _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13

9- Draining the Beverage Brewing System _ _ _ _ 14

10- Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ 14

11- Limited One Year Warranty _ _ _ _ _ _ _ _ _ 15

When using electrical appliances, basic safety precautions should be always

followed, including the following:

1. READ ALL INSTRUCTIONS before attempting to operate your appliance.

2. This product is designed for household use only. Do not use appliance for other than its

intended purpose.

3. Do not touch hot surface. Use handles or knobs only.

4. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

5. Close supervision is necessary when any appliance is used by or near children.

6. Keep appliance at least 4 inches away from walls or other objects during operation. Do not

place any objects on top of appliance while it is operating. Place the appliance on a surface that

is resistant to heat.

7. Do not use outdoors.

8. Unplug unit from outlet when not in use and before cleaning. Allow unit to cool before putting

on or taking o parts, and before cleaning.

9. To protect against electrical shock, do not immerse cord, plugs, or appliance in water

or other liquids.

10. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions,

or has been damaged in any manner.

NOTE: DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. THIS WILL VOID

THE WARRANTY.

11. The use of accessories not evaluated for use by the manufacturer may result in re, electrical shock

or personal injury.

12. Never move the appliance by pulling the cord. Do not let the cord hang over the edge of a table

or counter or touch hot surfaces.

13. Place the beverage system on a table or at surface.

14. Never operate your beverage system without water in the water tank.

15. Do not place appliance on or near a hot gas or electric burner or in a heated oven.

16. Press the ON/OFF button to the OFF (O) position to turn the appliance OFF.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

ADDITONAL IMPORTANT SAFEGUARDS

INTENDED USE - HOUSEHOLD USE ONLY

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE

BY AUTHORIZED SERVICE PERSONNEL ONLY.

WARNING:

This appliance generates heat and escaping steam during use. Proper precautions must

be taken to prevent the risk of burns, res, or other injury to persons or damage to property.

1. All users of this appliance must read and understand this Instruction Book before operating

or cleaning this appliance.

2. The cord to this appliance should be plugged into a grounded 3-prong electrical outlet only.

3. Use water only in this appliance! Do not put any other liquids or food products in this appliance.

Do not mix or add anything to the water placed in this appliance, except as instructed in the

Descaling Instructions on page 13 - section 8 to clean the appliance.

4. DO NOT attempt to move an appliance containing hot liquids. Allow appliance to cool completely

before moving.

5. If this appliance begins to malfunction during use, unplug the cord. Do not use or attempt to repair

the malfunctioning appliance.

6. If this appliance falls or accidentally becomes immersed in water or any other liquid, unplug it

immediately. Do not reach into the water! Do not use this appliance after it has fallen into

or has become immersed in water.

7. Always use fresh, cool water in your appliance. Warm water or other liquids, except as listed in

cleaning section, may cause damage to the appliance.

8. CAUTION: Residue and build-up that forms on the appliance may be hazardous to your health.

Clean your beverage system carefully and regularly following the instructions outlined in this

Instruction Book.

The appliance is designed to brew espresso, coee, tea, hot chocolate and dispense hot water. It is intended

for household use only and must be used in accordance with these instructions. Use compatible brewing

capsules only. Use of any other brewing capsule is considered improper. Use of the appliance in any manner

other than as directed herein could cause harm to persons and void the warranty. The manufacturer will not

be responsible for injury or damage resulting from improper use of the appliance.

Key to Symbols

CAUTION

This is the safety warning symbol.

It is used to call your attention to possible risks of personal injury. To avoid possible injury or death,

always follow all procedures outlined in this Instruction Book.

IMPORTANT! READ THESE INSTRUCTIONS.

Not dishwasher safe.

Electrical warning.

Description

Dispensing spout

Power-supply cord with

grounded 3-prong plug

Removable Water Tank with

Grip and MAX water line

Water Tank Door

Power ON/OFF Button

Adjustable Drip tray

(3 height options :

1 2 3 )

Drip plate

Capsule Lever

Capsule compartment

Used capsule drawer

6.5

6 beverage buttons

Red indicator light

Short Espresso

Long Espresso

8-oz. Coee or Tea

10-oz. Coee or Tea

12-oz. Coee or Tea

6.5-oz. Hot Chocolate

3 4

Description

Press the ON/OFF button to the ON position. All 6 beverage

buttons and the red indicator light will begin to ash.

IMPORTANT: Make sure the capsule lever is

lowered to its original position.

Before First Use: Prime the Pump

Place a cup or mug onto the drip tray.

Fill the water tank. There are 3 ways:

• remove the water tank cover

• ip the water tank lid open to use a spouted container

• pull the water tank up and out of the unit using the side

grips to remove.

Fill water tank with cool, clean water (it is STRONGLY

recommended you use DISTILLED WATER) to the MAX water

ll line. Make sure water tank is closed and locked properly

into position before proceeding.

Unpack the beverage system and

remove all packaging materials.

Plug the power-supply cord into a

grounded 3-prong electrical outlet.

Prime the Pump. Press any beverage

button. After a moment, the pump will

operate. The priming process will take

about 2 minutes.

6.5

The unit will beep twice to indicate the pump is

primed. When all 6 beverage buttons are illuminated

(and not ashing) and the red indicator light is o; the

beverage system is heated and ready for use.

IMPORTANT: If the red indicator light

continues to ash, repeat the priming

procedure. It may take several times to

properly prime the pump.

Empty the cup or mug. Slide out the used capsule drawer

and empty any priming water. Replace the drawer. Place the

empty cup or mug onto the drip plate. When all lights stop

ashing, the beverage system is heated and ready to brew.

Make sure the water tank is lled, but

does not exceed the MAX water ll line.

Make sure the power-supply cord is

plugged into a grounded 3-prong

electrical outlet and the power ON/OFF

button is in the ON position.

Check to make sure the capsule drawer is empty.

Raise and lower the capsule lever to eject any used

capsule into the drawer. Pull the used capsule

drawer out, remove capsule (if any) and slide

drawer back into place. Test to make sure drip tray

is properly and securely turned/locked in position at

the appropriate level. Add the drip plate and place

an empty cup or mug under the dispensing spout.

CAUTION: Capsule may be hot.

Use care when handling.

All buttons will ash as the unit begins to heat.

When all 6 beverage buttons and the red indicator

light are illuminated (and not ashing); the

beverage system is heated and ready to brew.

Before First Use: Prime the Pump (continued)

Brewing Beverages

Each coee and tea capsule features an internal double ltration system to ensure evenly balanced extraction and optimal avor.

Every serving of espresso, coee and tea is freshness-sealed to lock in its exquisite taste and aroma.

6 beverage buttons

Red indicator light

Short Espresso

Long Espresso

8-oz. Coee or Tea

10-oz. Coee or Tea

12-oz. Coee or Tea

6.5-oz. Hot Chocolate

6.5

Press the beverage button

corresponding to the loaded

capsule. Choose from short

espresso and long espresso,

8 oz., 10 oz. and 12 oz. coee

or tea, or hot chocolate. The

brew selection will begin

to ash.

Raise the capsule lever to access the top of the capsule

compartment. Gently load the selected capsule into

the capsule cut-out.

IMPORTANT: Do not remove or puncture

foil covering.

Lower the capsule lever to its original position. This will

puncture the capsule for brewing.

Select the capsule of your choice.

Choose from espresso, coee, teas

or hot chocolate

Brewing Beverages (continued)

In approximately 3 seconds, a hot, steaming

beverage will ow through the dispensing spout

into the cup or mug on the drip plate.

CAUTION: This beverage system

dispenses extremely hot water.

To avoid burns or personal

injury, NEVER raise the capsule

lever while brewing. NEVER

remove water tank or used

capsule drawer while brewing.

NEVER place your ngers under

the beverage dispensing spout

while brewing.

Carefully remove the freshly brewed beverage.

Raise and lower the capsule lever to eject the used capsule into

the drawer. Pull the used capsule drawer out, remove used capsule

and slide drawer back into position. Make sure the drip plate rests

properly on the drip tray at the base of the capsule drawer.

CAUTION: Capsule may be hot.

Use care when handling and

disposing.

IMPORTANT:

Traces of the just-dispensed beverage may

remain inside the machine. To ensure rich, clear

avors, when switching from one beverage to

another, we suggest rinsing the beverage system

by brewing 1 (12-oz.) cup of plain water (do not

insert a capsule) between beverages.

Water Tank Dry Protection Alarm

6.5

If, at any time during brewing, the red indicator light begins

to ash and the 3 audible beeps are heard, the water tank

is empty.

Press any brewing button; the appliance will

resume dispensing.

Raised Capsule Lever Safety Alarm

1 2

As a safety precaution, if the capsule

lever is raised at any time during brewing

or dispensing, the red indicator light will

begin to ash and an audible intermittent

beep can be heard. The beverage system

will immediately stop dispensing.

Lower the lever to its original position.

Fill the water tank with fresh, still water.

To reset the alarm and resume brewing,

press any brewing button.

Power Energy Savings: Sleep Mode

User Maintenance Instructions

Daily Maintenance

After 4 hours of inactivity, the beverage

system will advance to sleep mode

Press the ON/OFF button to the OFF (O)

position. Unplug the beverage system

and allow to fully cool before cleaning.

Turn the drip tray clockwise to remove. Lift

the drip plate o the tray and rinse with

fresh water. Empty and rinse the drip tray.

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing requiring

disassembly other than cleaning must be performed by a qualied appliance repair technician.

CAUTION: To protect against electric shock, never immerse the beverage system

base, cord or plug in water or other liquid.

To begin brewing, press any brewing button; the

system will begin to preheat the water for brewing.

See “Brewing Beverages” section of this Instruction

Book for a detailed description.

Make sure the lever is lowered to its o

riginal position.

Lift and lower the capsule lever to release any

used capsules that may remain in the machine.

Slide out the used capsule drawer; remove any

used capsule(s). Rinse well and then replace

the empty drawer.

Replace the drip tray. Insert the drip tray into the appropriate

slot on the front of the used capsule drawer. Rotate the drip

tray counter-clockwise until it is securely in position. Replace

the grill plate.

IMPORTANT: The beverage brewing

system drip tray, used capsule

drawer and water tank are not

dishwasher safe.

To remove stains, use a soft, dampened sponge

or cloth and a non-abrasive, gentle dish soap to

handwash and to clean the outer surfaces of the

beverage system. Rinse well.

Remove and empty the water tank. Set water tank

aside.

IMPORTANT! Make sure water tank

is NOT attached while draining the

system.

Make sure the ON/OFF button is in

the OFF (O) position.

IMPORTANT! To ensure the nest brewed taste and beverage system eciency, a monthly routine of descaling

is recommended. Simply brew 1 (12-oz.) cup of plain water (do not insert a capsule) through the system.

TO AVOID DAMAGE TO THE BEVERAGE BREWING SYSTEM, DO NOT USE VINEGAR!

Daily Maintenance (continued)

Descaling

Draining the Beverage Brewing System

Use the water tank’s side grips to remove. Empty and rinse

the tank well.

IMPORTANT: The water tank is NOT

dishwasher safe.

Draining the Beverage Brewing System

Troubleshooting

Press the top 3 buttons while pressing the

power ON/OFF button to the ON position.

The unit will perform a drainage cycle.

Unplug the beverage system.

After the beverage system is fully drained,

press the ON/OFF button to the OFF (O) position.

Problem Cause / Solution

I’ve primed the pump. Priming water has been

dispensed. The red indicator light continues to ash.

It may take several times to properly prime the pump.

➤

Repeat the priming procedure. The unit will beep

twice to indicate the pump is primed. When all 6

beverage buttons are illuminated (and not ashing)

and the red indicator light is o; the beverage system

is heated and ready for use.

The brewed beverage is not hot enough. Cold cup or mug.

Scale build-up in the beverage system.

➤

Preheat the cup or mug.

Descale the beverage system monthly.

The lever cannot be lowered. The used capsule drawer is full.

There is a capsule lodged in the capsule compartment.

➤

Slide out the used capsule drawer; dislodge and

remove the used capsule. Replace drawer.

The beverage system will not brew. Used capsule in drawer.

➤

Slide out the used capsule drawer; dislodge and

remove the used capsule. Replace drawer.

Beyond the recommended cleaning and maintenance procedures, the CBTL® machine is not user serviceable.

For additional options, please refer to the Limited Warranty.

Limited One Year Warranty

SENSIO Inc. hereby warrants that for a period of one year from the date of purchase, this product will be free from

mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole

discretion, SENSIO Inc. will either repair or replace the product found to be defective, or issue a refund on the product

during the warranty period. Any refund to the customer will be at a pro-rated value based on the remaining period of

the warranty. The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is

not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail

stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the

warranty.

EXCLUSIONS: The warranty does not cover normal wear of parts or damage resulting from any of the following:

negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the

operating instructions, disassembly, repair, or alteration by anyone other than qualied SENSIO Inc. personnel. Also,

the warranty does not cover Acts of God such as re, oods, hurricanes, or tornadoes or use for rental or commercial

services.

SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or

implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or

tness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces or jurisdictions

do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied

warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specic

legal rights which may vary by state, province and/or jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE: You must contact Customer Service at our toll-free number:

1-866-814-8150. A Customer Service Representative will attempt to resolve warranty issues over the phone.

If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number

and asked to return the product to SENSIO Inc. Attach a tag to the product that includes: your name, address,

daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original

sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance

prepaid) to SENSIO Inc.’s address below. SENSIO Inc. shall bear no responsibility or liability for the returned product

while in transit to SENSIO Inc.’s Customer Service Center. Neither the retailer nor any other company involved in the

sale or promotion of this product is a co-warrantor of this manufacturer's warranty.

Sensio Inc., 1175 Place Du Frere Andre, Montreal, Canada H3B 3X9

CBTL 10134 Instruction book

Brand: CBTL

Model: 10134

Category: Coffee making accessories

Type: Instruction book

Download PDF

report

CBTL 10134 Instruction book

CBTL 10134 Instruction book

Related papers

Other documents