Nakamichi Shockwafe Pro 7.1 User manual

USER GUIDE

Our one-stop support solution:

www.nakamichi-usa.com/faq

Phone Support: (415) 805 6913

(Weekdays 10am - 7pm PST; Weekends 10am - 5pm PST)

Package Contents ...............................................................................................................4

Control and Connections.....................................................................................................5

Setting up the SHOCKWAFE PRO 7.1 System .................................................................8

Setting your TV................................................................................................................. 13

Connecting theTV ............................................................................................................ 14

Advance Setup: Non-HDMI ............................................................................................. 16

Advance Setup: HDMI...................................................................................................... 17

One Device Setup ............................................................................................... 18

Two Device Setup................................................................................................ 19

Three Device Setup............................................................................................. 20

Four Device Setup (4K TV) ................................................................................ 21

Four Device Setup (1080p and below) ............................................................... 22

Audio Settings for Streaming Devices.............................................................................. 23

Using the Remote............................................................................................................. 24

Accessing SOURCE on your Remote .............................................................................. 25

Accessing SETUP on your Remote.................................................................................. 26

Accessing MENU on your Remote................................................................................... 27

Accessing INFO on your Remote..................................................................................... 28

Accessing Audio Settings on your Remote ...................................................................... 29

Saving Audio Setting to System Memory ......................................................................... 30

Accessing ROOM SIZE on your Remote ......................................................................... 31

Using Bluetooth Mode ...................................................................................................... 32

Re-linking the Subwoofer with the Soundbar ................................................................... 33

Wall-Mounting the Soundbar............................................................................................ 34

Wall Mounting the Satellite Speakers............................................................................... 36

Firmware Upgrade............................................................................................................ 37

Help & Troubleshooting .................................................................................................... 38

Warranty Information & Customer Support ...................................................................... 39

Glossary ........................................................................................................................... 40

Specification ..................................................................................................................... 42

Legal & Compliance ......................................................................................................... 43

TABLE OF CONTENTS

3

4

Soundbar Power Adapter

(Length: 5 feet)

2 x Satellite Speaker Audio Cables

(Length 32.8 ft. each)

(Length: 5 ft.)

Digital Optical cable

12 x Wall Screws

12 x Screws Brackets

2 x Mounting Screws

4 x Mounting Screws

6 x Soundbar

and Satellite

(Length: 5 ft.)

1 x Subwoofer Power Cable

1 x Soundbar Power Cable

(Soundbar) (Satellite Speakers)

Wall Mount

Brackets

Mounting Guide

(Length: 4 ft.)

3.5mm Audio Cable

1 x SHOCKWAFE PRO 7.1

Soundbar

1 x Wireless Subwoofer

BLUETOOTH / USB MODE ONLY

HDMI 2 HDMI 3

CENTR

+

+ +

+

MOVIE

ENTER

TAINMENT

LED

SIZE

MUSIC

V S D

CLEAR VOICE

SETUP

RETURN INFO

LED DIMMER

BASS VOL

MENU

ENTER

STEREO PURE DIRECT DSP OFF

SUR

ON

OFF

TREB

LIP

SYNC

AUTO

VOL

SB L/R

S L/R

LIP

SYNC

OPTICAL

2

AUX

SYSTEM MEMORY

HDMI

ARC

HDMI 4 COAXIAL

USB

1

NIGHT

ROOM SIZE

DIALOG

CONTROL

1 x Remote Control

with Batteries

HDMI OUT [1]

(ARC TO TV)

HDMI IN [4]

(Compatible with

HDCP 2.2, 4K HDR

Pass-thru)

HDMI IN [2]

(Compatible with

HDCP 2.2, 4K

HDR Pass-thru)

HDMI IN [3]

(Compatible with

HDCP 2.2, 4K

HDR Pass-thru)

USB Music Playback

(WAV & MP3) and Firmware

Upgrade

OPTICAL

Digital Optical

Audio input

AUX

Analog Audio Input

(Stereo 3.5mm)

COAXIAL

Digital Coaxial

Audio input

5

b

DC IN

Power Supply

PRO 7.1 Ch

Press to turn ON Soundbar or go to STANDBY mode.

Press to play NAKAMICHI audio test tone on each channel.

b

REMOTE ANGLE

Tilt the remote downwards by

15-25 degrees for best response

(as if you are aiming the remote

slightly towards the ground).

6

7

Back of Subwoofer

Pairing

LED indicator

Pairing Button

Power Switch

USB IN

(For Firmware upgrade only)

RED LED Indicator

(Firmware upgrade indicator)

Back of Satellite Speakers

Satellite Speaker Port

(Connects to Subwoofer)

Satellite Speaker Port

(Connects to Subwoofer)

LEFT RIGHT

Connect to

LEFT BACK

Satellite

Speaker

Connect to

RIGHT BACK

Satellite Speaker

Power Port

1 SETTING UP THE SHOCKWAFE PRO SYSTEM

8

Diagram on the right is the recommended speaker placement with optimal distance. Actual distance can vary based on actual room layout.

9 ft (2.5m)

Min. Distance

Note:

Illustration is not to scale. Speaker stands are not included.

Surround back speaker drivers should be at ear level and pointed right at the listener’s sitting area.

6.5 ft (2m)

Option B

6.5 ft (2m)

Option A (Recommended) Option A (Recommended)

135

O

- 150

O

135

O

- 150

O

Min. Min.

Back of Soundbar

Plug the power adapter to the sound bar

and into an electrical outlet.

9

Connect the Surround LEFT and RIGHT BACK satellite speakers to the subwoofer using the included satellite

speaker audio cables.

10

LEFT RIGHT

11

4

5

6

7

Blinking Blue Light: subwoofer is in

pairing mode.

Blue Light Stays On: subwoofer

successfully paired.

Note: If the Blue LED light stays blinking, press and hold

pairing button until Blue LED light start blinking fast

to establish wireless connection to the subwoofer.

Power

Remove the battery cover by

pulling it out from the remote.

8 9

10

Top

Insert the included batteries in the

accessories and gently push the

battery cover back into place.

Turn your soundbar on by pressing the Power

button. Use respective input keys to select an

audio input source to be played.

BLUETOOTH / USB MODE ONLY

Source

Top

+

SETUP MENU

V S D

CLEAR VOICE STEREO PURE DIRE CT DSP OFF

SYSTEM MEMORY

DSP

HDMI

2

HDMI

3

MOVIE

ENTER

TAINMENT

MUSIC

OPTICAL

2

AUX

HDMI

ARC

HDMI

4

COAXIAL

USB

1

NIGHT

12

13

*More set-up on HDMI-CEC, visit: www.nakamichi-usa.com/cec

From the SYSTEM menu, enable CEC and ARC

(SAC) functions.

From the CEC menu, select Device Discovery to

register the soundbar with the TV.

(whichever is available)

You will need to connect your soundbar to you TV’s HDMI

ARC port using a high speed HDMI 2.0 cable.

14

b

Options for connecting your TV: HDMI (See Next Page), OPTICAL , COAXIAL

!

Note: Be sure to connect to an audio output port on TV, not an audio input port.

Not all TVs have the audio outputs shown above. To connect the soundbar directly to your other devices

(Blu-ray player, game system, etc.) see your device’s user manual.

Cable appearance may dier from the ones supplied.

If there is no audio during the setup, see page 40 for Help & Troubleshooting

Cable not included

Connect one end of the HDMI cable to the HDMI (ARC) port at

the back of your TV.

Connect the other end to the HDMI OUT [1] (ARC TO TV) port

on your Nakamichi soundbar.

15

(HDMI cable send video output and receive Audio input from TV)

Tablet/MP3 Player/Computer

16

b

(compatible with

HDCP 2.2,

4K HDR pass thru)

HDMI cables transmit both audio and video. To view video

from these devices, turn the Soundbar on, then set the

Soundbar input to HDMI IN [2], HDMI IN [3] or HDMI IN

[4]. Set your TV input to the HDMI ARC port to which the

Soundbar is connected.

HDMI IN [2]

(compatible with

HDCP 2.2,

4K HDR pass thru)

HDMI IN [3]

(compatible with

HDCP 2.2,

4K HDR pass thru)

HDMI OUT [1]

(ARC TO TV)

HDMI IN [4]

GAME CONSOLE

BACK OF TV

17

Back of Soundbar

HDMI OUT [1]

(ARC TO TV)

If the device is not equipped with a HDMI port, use an Optical or Coaxial output.

If your TV is previously connected to a sound system or soundbar, disconnect the TV AC Power cord from the wall for one

minute. Plug the TV power back in and then connect the HDMI ARC to the Soundbar to ensure proper HDMI handshake.

18

ARC)

If the device is not equipped with a HDMI port, use an Optical or Coaxial output.

19

HDMI OUT [1]

(ARC TO TV)

HDMI IN (Preferably ARC)

-

If the device is not equipped with a HDMI port, use an Optical or Coaxial output.

20

-

HDMI OUT [1]

(ARC TO TV)

4

HDMI IN (Preferably ARC)

Page is loading ...

Nakamichi Shockwafe Pro 7.1 User manual

Related papers

Other documents