Pro X Series DUAL-100 User guide

Brand
Pro X Series
Model
DUAL-100
Type
User guide
DUAL-100
18 Volt Dual Head Drill
Operating Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time
without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO
NOT OPERATE THIS PRODUCT!
HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE
RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com
or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of
the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
PRODUCT SPECIFICATION FOR TWIN-HEAD CORDLESS DRILL
TWIN-HEAD CORDLESS DRILL
Know your new TWIN-HEAD CORDLESS DRILL
3-5 hours charger:
Plug the
adaptor into a suitable mains supply.When
the battery is charging,the light is RED,After
3-5h,the light turns from RED to GREEN.
Charging is complete.Never charge the
battery for longer than 5 hours.Do not take
out the battery from the charging base
during the charging process till the red light
turns to green.
The Twin-Head Cordless Drill
is fitted with 2 keyless chucks
Torque Settings
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Pro X Series DUAL-100 User guide

Brand
Pro X Series
Model
DUAL-100
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents