Assembly instructions HL6800
Smartphone Holder
X Pro
x1 — Smartphone Holder
x2 — Spacer Rings (optional)
Parts
A
B
x1 — Mount Screw
x1 — Garmin® Mount
x1 — Wahoo® Mount
C
D
E
Tool Required
Allen Key
A
E
B
1
Assembly video
Visit designbydelta.com/downloads
WARNING
Using phone device while riding can cause accidents resulting in serious injury.
Important: Nuts and bolts can loosen over time, resulting in serious danger should the item fall o while in motion.
Check frequently to ensure all bolts are properly tightened. Ensure the device ts snugly in the holder before riding.
Not for o-road use.
Service: Please do not return to store;
for immediate response email
service@designbydelta.com
Delta Cycle Corporation
36 York Avenue, Randolph, MA 02368 USA
800-474-6615 / www.designbydelta.com
DC
Remove stem cap and insert phone holder,
Using spacer rings as needed.
Reinstall stem cap and tighten stem bolt securely.
1
IMPORTANT NOTE
Never loosen the stem clamp bolts.
GARMIN® OR WAHOO® MOUNTING OPTIONS
Use Allen key (2.5mm) to remove mount screw.
(FIGURE 1)
2
Choose Garmin
®
or Wahoo
®
mount, position on to
arm. Tighten mount screw with Allen key (2.5mm).
(FIGURE 2)
FIGURE 1 FIGURE 2
GARMIN®WAHOO®
