PXM PX155 is a digital dimmer that enables its user to control four independent circuits of 600W loads each. It has a built-in interference suppression system, signal lights, fuses, DMX-512 control, and 0 - 10V input. It also has external control keys that work following one of four built-in functions. Programmable parameters for all channels include DMX start address of the first channel, control characteristics, ACL - limiting the output voltage in the range of 50 - 230V with an accuracy of up to 1V, Preheat - bulb preheating (0 - 10%), and dimmer reaction to DMX signal loss.
PXM PX155 is a digital dimmer that enables its user to control four independent circuits of 600W loads each. It has a built-in interference suppression system, signal lights, fuses, DMX-512 control, and 0 - 10V input. It also has external control keys that work following one of four built-in functions. Programmable parameters for all channels include DMX start address of the first channel, control characteristics, ACL - limiting the output voltage in the range of 50 - 230V with an accuracy of up to 1V, Preheat - bulb preheating (0 - 10%), and dimmer reaction to DMX signal loss.
User manual
1 Description...................................................................................................4
2 Safety conditions........................................................................................5
3 Connectors and control elements...........................................................7
4 Designation of displayed messages.......................................................7
5 Dimmer programming...............................................................................9
6 Programmable parameters......................................................................9
6.1 Digital input settings................................................................................................10
6.1.1 Group parameters............................................................................................11
6.1.2 Individual parameters......................................................................................12
6.1.3 Temperature...................................................................................................... 13
6.1.4 Input control mode..........................................................................................13
6.1.5 Scenes and chaser programming.................................................................13
6.2 Analog input settings...............................................................................................14
6.2.1 Group parameters............................................................................................14
6.2.2 Individual parameters......................................................................................15
6.2.3 Temperature...................................................................................................... 16
6.2.4 Input mode........................................................................................................ 16
6.3 Function diagrams for external button control...................................................17
6.3.1 Function one.....................................................................................................17
6.3.2 Function two..................................................................................................... 17
6.3.3 Function three...................................................................................................18
6.3.4 Function four....................................................................................................18
6.3.5 Function #ve.....................................................................................................19
7 Dimmer access lock................................................................................20
7.1 Switching the access lock on.................................................................................21
7.2 Switching the access lock off................................................................................21
8 Menu scheme for digital input...............................................................23
9 Menu scheme for analog input..............................................................24
10 Assembly of the device.........................................................................25
11 Connection scheme..............................................................................26
11.1 DMX-512 signal control.........................................................................................27
11.2 Control of linear potentiometers.........................................................................28
11.3 0 – 10V control.......................................................................................................29
11.4 Monostable buttons control.................................................................................30
12 Dimensions.............................................................................................31
13 Notes........................................................................................................31
14 Technical data........................................................................................32
!"!#$%$& $
&'
#(&#&'#'
$)*+
,-,$)*+
./"01
'23,33,
45&'&
666'&'&
7 '-
,''0
,
1 Description
$"$$"$%$'
!$ $&$"!$66
$&$$!'8!-
&&9""!99-$:;&'
!# !6#$6!
-'
"&!4
•$$!%!
•!<9 9"!9&9
6!$/=>/??9!!@
•AB:"!& "!":,;6!
&;
•!:&!"<:C@
•$"<9C96!$69
9!6!@
8$ $&"&!!4
•$$<@:!!$
$$$!! ! !
$$
•"!!
•"!& "!":,;6!
&;
!&4-$""9"
":;"#'
2 Safety conditions
$&6$$$$,;"$96!
!#6! $'!
!6"4
' 89&&69!$&$
&!$"!&&&D%9$"!
$&!'
' $#6!!!&
:&E$:6#"$<,-$"$@'
,' A!$!$&$"!$
!$"'
' 8! $""$9!$&$6!
$!!$$'
' !$ $!$6!,-$
'-'
' $6!"9
6!$&&6!$!$&&
D%,;&&$$ '
1' 6&&$6!$
#6! $A$$-&!'
3' A!&$9!#!FG
&6$$ '
0' A&$$""&"!$$6!
&6&&'
' !$ !$&$"6$!
D$'
' A$$!#9&$&&"9!$ $$'
' 6!$"$<@"!$$!
'
,' !$ $&6!!$$"
0C'
' !$ $&6!&6!2H
!"!!2H'
=/EI
' 8&&!& 6!#'
' 8&&!$6!$
'
,' !$ $$ <$@'
!$$!9
J&$!$ !!
9!&$$'
3 Connectors and control elements
4 Designation of displayed messages
="46$"&
"!&!!6&"<C@
"!&!!6&"<C@
B:& "",;
$$$":0
K&&
:9!$$!
.-!<$$:"@
1
DMX signal presence
LED indicator
DMX-512 and analog 0 - 10V
control inputs
Fan
Display
Programming buttons
Control outputs Power supply couplings
Output signal presence
LED indicator
Output fuses
PE LN
"!<$$:"@
!9$!!
$!&""
E&!
?:?9!$$
?$6!"><!!""@
A"&:;
."!"
&
=!&: 3
=":$ "
8$ $&""&
B!
B"!!
8 $!
E:E,9&!
=":$ "&
<0&!@
=":&$C
=":&$
!:L%&!"9"C
:9&"<"
&@
!&$",
6!!
6!"!&$<$">"@
3
E
$6!'
"!$
&: &
A"$:"!&!
"$<!noS$@
5 Dimmer programming
A"!$ 96 !$&$'"
!$ &!$&!6$$$&AdC
"9""$'"Esc$"&
6!$&:!"!$"On'Enter
6!!9!$&6!6ALL'PrevNext
&""<ALL9Ind9AdC9dEF@9$!&Enter
%'
6 Programmable parameters
!&&"!$$4
' K&&:ALL –"!!!'
?$$"!$$$&$!
$$!%!'""$$!
$!& &"$$ $$$"'
' 8$ $&:Ind:!!6!$ $
&9$"$ $$$"'!$$
0
'
Group parameters have a higher priority than individual parameters.
This means that programming in the ALL mode, for example, the DMX
address, cancels the previous settings for all channels.
,' &:°C:!!#!
$&'
' A">$"$&6!":AdC:!
6!6$"$<@"<:;
"@'
' $!&"":dEF: 6!!$"
$<!&AdCOFF@'
!64
◦,&""
◦-$%$!&6!&$$$"&
&""
◦&$$$"-!
6.1 Digital input settings
"&<"!$6!-"@
6!&AdCOFF'
6.1.1 Group parameters
' Adr:$$!"0<"0!
$$!%!$$!
!$!@'
' Cur:!9!0&!4
◦Lin:
◦SP:6!
◦Inu: $
◦LnU:"!
◦E_P:&
◦nE1MnE3:&N
◦Li2::C<F !&6&
:C@
,' ACL:!& "!":,;
' PrE:!"&!%9!":C
' FSo:$6#&&6&&
ENTER
ENTER
NEXT
NEXT
NEXT
NEXT
' noS:&!$"&'!
&!4
◦On:"&C
◦OFF:"&
◦HLd:! $ !$
◦:6&6!"<$@
◦Sc1MSc4:&"
◦CrF:-!
◦CrP:-$%$!
◦AnL:"$ !<'"'
6"!$
@
6.1.2 Individual parameters
' Adr:$$!"
' Cur:!9!0&!4
◦Lin:
◦SP:6!
◦Inu: $
◦LnU:"!
◦E_P:&
◦nE1MnE3:&N
◦Li2::C<F !&6&
:C@
,' ACL:!& "!":,;
6.1.3 Temperature
°C:!&6!#!$&
!"-2H'
=/EI"Er19 '
6.1.4 Input control mode
AdC:6!"6$$"$<-9"
OFF@$"$<:;":"
On@'
6.1.5 Scenes and chaser programming
' Sc1MSc4:&""4
◦C01MC04:$$!
▪0M100:!"!&"C
' CrP:-$%$!4
◦F01MF08:$&
▪C01MC04:$$!
•0M100:!"!&"C
◦LEn:!&<3@
◦SPd:!&$<$@,<'$@
◦FAd:$"6!"
,' CrF:-!4
◦SPd:!&$<$@,<'$@
◦FAd:$"6!"
,
6.2 Analog input settings
A"&!:;
6!!&AdCOn'
6.2.1 Group parameters
' AIn:$$""&4
◦AnL: ":;<;$"9;
"!@"#O&
"
◦bIn:"4
▪Fun:!<!',@
▪rIS:"!"6$&
ACL ":<$@$
▪LAS:$000$
' Cur:!9!0&!4
◦Lin:
◦SP:6!
ENTER
ENTER
NEXT
NEXT
NEXT
NEXT
◦Inu: $
◦LnU:"!
◦E_P:&
◦nE1MnE3:&N
◦Li2::C<F !&6&
:C@
,' ACL:!& "!":,;
' PrE:!"&!%9":C
' FSo:$6#&&6&&
6.2.2 Individual parameters
' AIn:"&"!!4
◦AnL: ":;<;$"9;
"!@"#O&
"
◦bIn:"4
▪Fun:!<!',@
▪rIS:"!"6$&
ACL ":<$@$
▪LAS:$000$
' Cur:!9!0&!4
◦Lin:
◦SP:6!
◦Inu: $
◦LnU:"!
◦E_P:&
◦nE1MnE3:&N
◦Li2::C<F !&6&
:C@
,' ACL:!& "!":,;
6.2.3 Temperature
°C:!&6!#!$&
!"-2H'
=/EI"Er19 '
!D&&$6!!&6!!6"
"!&$!$4
•H:!$
•0H:C$&&6&$C6!!D
H
•H:6!-!$
A"$6"!&1H9!$
6#""&6'
6.2.4 Input mode
AdC:6!"6$$"$<-9"
OFF@$"$<:;":"
On@'
6.3 Function diagrams for external button control
6.3.1 Function one
6.3.2 Function two
1
Time
Rising
time
(parameter rIS)
Button
held pressed
MAX
(ACL)
MIN
Button
released
Time
Rising
time
(parameter rIS)
Short
press
(<500 ms)
MAX
(ACL)
MIN
Button
held pressed
Button
released
6.3.3 Function three
6.3.4 Function four
3
Time
Rising
time
(parameter rIS)
Short
press
(<500 ms)
MAX
(ACL)
MIN
Short
press
(<500 ms)
Short
press
(<500 ms)
Short
press
(<500 ms)
Time
Rising
time
(parameter rIS)
Fall down time
= rising time
Duration
time
(parameter LAS)
Short
press
(<500 ms)
MAX
(ACL)
MIN
Short
press
(<500 ms)
E!D!`!!&!
LAS&9!&$<!
&$@'! !&#!
!'!!!"$'
6.3.5 Function !ve
"$!$"!PAQ!"!'
/$!"!&'"$!$"!
P.Q$!"!$6'A"!
P.Q"!6! !
'
0
Time
MAX
(ACL)
MIN
Button B
held pressed
Button A
held pressed
Buttons A and B
released
=/EI!$$!$$
P.Q<!!$"6@'
7 Dimmer access lock
A$"&$$&$&"!
&$&""<&"-$%$
"@'!!$$%$&
6!&$%'!!&$$
dEF$&$'
REFLECTORS
max. 4 x 600W
NEUTRAL
STRAND
PROTECTIVE
STRAND
PHASE
STRAND
230V POWER SUPPLY
RCCB with overloady
type C 10A
PE
PE
L OUT 4
L OUT 3
L OUT 2
N OUT
N OUT
L OUT 1
BUTTON A
BUTTON B
Additional
resistor
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
PXM PX155 is a digital dimmer that enables its user to control four independent circuits of 600W loads each. It has a built-in interference suppression system, signal lights, fuses, DMX-512 control, and 0 - 10V input. It also has external control keys that work following one of four built-in functions. Programmable parameters for all channels include DMX start address of the first channel, control characteristics, ACL - limiting the output voltage in the range of 50 - 230V with an accuracy of up to 1V, Preheat - bulb preheating (0 - 10%), and dimmer reaction to DMX signal loss.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SKYDANCE lV User manual
-
Work-pro WD 2012 DMX User manual
-
Elation MDP-1219 User manual
-
Vari-Lite ©2018-2023 Signify Holding. All rights reserved. Owner's manual
-
Martin ProScenium DMX User manual
-
Samsung LP624 User manual
-
Robe ClubWash 250CT User manual
-
GLP Scan Operator FX II User manual
-
Coemar DIGIfactor club 6x2,5Kw User manual
-
Stairville DMX Joker 512 MK2 USB-DMX Box Owner's manual