Everbilt 37904 Operating instructions

MOUNTING TEMPLATE

INSTRUCTIONS:

Add a decorative touch when displaying your address

with versatile numbers that can be mounted either flush

or elevated.

1. Determine desired location and using template, mark screw locations.

2. Drill holes for anchors using a 7/32 in drill bit.

3. Install anchors.

4. Insert end of threaded rod into number.

5. Slide on spacers.

6. Align screws with anchors and press into place using a rubber mallet.

Flush:

Elevated:

1. Determine desired location and using template, mark screw locations.

2. Drill holes for anchors using a 7/32 in drill bit.

3. Install anchors.

4. Insert end of threaded rod into number.

5. Align screws with anchors and press into place using a rubber mallet.

160 mm

180 mm