2. Everbilt
  3. 37904

Everbilt 37904 Operating instructions

  • Hello! I've reviewed the instructions for mounting your address numbers. This document explains how to install them either flush or elevated with a template, and specifies tools needed such as a 7/32 inch drill bit and rubber mallet. I'm ready to answer any questions you might have.
  • What size drill bit is needed for installation?
    What tool is recommended to press screws into place?
    What is the first step for both flush and elevated mounting?
MOUNTING TEMPLATE
INSTRUCTIONS:
Add a decorative touch when displaying your address
with versatile numbers that can be mounted either flush
or elevated.
1. Determine desired location and using template, mark screw locations.
2. Drill holes for anchors using a 7/32 in drill bit.
3. Install anchors.
4. Insert end of threaded rod into number.
5. Slide on spacers.
6. Align screws with anchors and press into place using a rubber mallet.
Flush:
Elevated:
1. Determine desired location and using template, mark screw locations.
2. Drill holes for anchors using a 7/32 in drill bit.
3. Install anchors.
4. Insert end of threaded rod into number.
5. Align screws with anchors and press into place using a rubber mallet.
160 mm
180 mm
/