HOLOPHANE ESL3 Pendant, MPL3 Pendant Installation guide

I'm an AI assistant and I have read the instruction sheet for HOLOPHANE House Side Shield installation. The document provides step-by-step instructions for installing shields on various types of glass diffusers, ensuring correct placement and safety. I am ready to answer any questions you have about this document or the shields it describes.
What tool is needed for installation?

What types of shields are covered in this instruction?

What is the first step in the installation process?

LTGEN3 Instruction Sheet

House Side Shield Installation

AFTER INSTALLATION DELIVER THIS

MANUAL TO OWNER

Figure 2

1 INSTALLATION

1.1 Tools and Materials Required

¼” Socket Driver

1.2 Shields Covered

• Large Teardrop, Bowl, & Flat Glass

House Side Shield

• LTD3HSS90

• LTD3HSS120

• LTD3HSS180

• Large Sag Glass House Side Shield

• LTD3HSG90

• LTD3HSG120

• LTD3HSG180

1.2.2 Loosen wing nut and swing open the outer glass diffuser

and remove. This will now make the COB optical assembly

accessible. See Fig. 1

1.2.3 Attach the shield with provided #10-24 self-threading

screws as shown. See Fig. 2.

1.2.3.1 IMPORTANT: Make certain the shield is NOT installed on

the side indicated as “STREET SIDE”.

1.2.4 Reinstall the glass diffuser assembly in the reverse order as

1.2.1

1.2.5 Return electrical power to luminaire.

Figure 1

GR2497

IMPORTANT SAFETY INSTRUCTIONS

WARNING – READ THESE INSTRUCTIONS

CAREFULLY BEFORE ATTEMPTING TO INSTALL OR

MAINTAIN THIS FIXTURE. WORK MUST BE DONE BY

QUALIFIED PERSONNEL. ALLWAYS DISCONECT

POWER BEFORE SERVICING THE LUMINAIRE

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT

IN DEATH, INJURY OR SIGNIFICANT PROPERTY

DAMAGE.