Carino Beauty GT-HDI-01 Quick start guide

Brand
Carino Beauty
Model
GT-HDI-01
Category
Hair dryers
Type
Quick start guide
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
E-MAIL SUPPORT [email protected]
Model Number: GT-HDI-01
PARTS AND OPERATING ELEMENTS
Styling nozzle
Cooling level button
(“Cool-Shot”)
Air inlet grill (hair filter)
Heating level switch
Hanging loop
Ventilator level switch
„Finger“-Diffusor
IONIC HAIRDRYER
Quick Set-Up Guide
OVERHEATING PROTECTION
With restricted air inlet, the hairdryer will switch
off through the built-in overheating protection.
1. Set the heating level switch to position 0.
2. Disconnect the mains plug from the socket.
3. Allow the hairdryer to cool down sufficiently.
4. Clean the air inlet, see “Cleaning” in the user
guide.
Subsequently, you can use the hairdryer again.
REFER TO THE USER GUIDE FOR
MORE DETAILED INSTRUCTIONS.
INFORMATION REGARDING USE
zFor fast hair drying, it is recommended to first
use the appliance for a few minutes on a high
heat level, in order to then switch down to the
lower level and shape the desired style.
zFor setting curls/waves, use the cooling level
button (“Cool-Shot”). The cooling level button
can be used at low and high heat ventilation
level. Keep the cooling level button pressed
down during use.
zWith the include styling nozzle, you can use
the airflow in a targeted manner for styling.
The styling nozzle can be rotated into any
position.
zBefore combing out your hair, allow it to cool
off first, so that your hairstyle holds its shape.
zThe “finger” diffuser (air shower) will enable
you to dry your hair particularly carefully,
e.g. with permed hair.
  • Page 1 1

Carino Beauty GT-HDI-01 Quick start guide

Brand
Carino Beauty
Model
GT-HDI-01
Category
Hair dryers
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents