Roadstar LCD-7111KL Owner's manual

Type
Owner's manual
7” (17.8 CM) TFT-LCD COLOUR
TELEVISION / MONITOR AND REMOTE
CONTROL
LCD-7111KL
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
Instructionmanual
Bedienungsanleitung
Manueldinstructions
Manualed’istruzioni
Manualdeinstrucciones
Manualdeinstrões
English Page 1
Deutsch Seite 15
Français Page 29
Italiano Pagina 43
Español Página 57
Português Pagina 71
INDEX
Ihres neues Gerät wurde unter Beachtung der
strengen ROADSTAR-Qualitätsvorschriften gefertigt.
Wir danken Ihnen für den Kauf unseres Produktes
und wünschen Ihnen optimalen Hörgenuss. Bitte
lesen Sie diese Bedienungsanleitung durch, und
heben Sie sie auf, um jederzeit darin nachschlagen
zu können.
Il vostro nuovo apparecchio é stato prodotto ed
assemblato sotto lo stretto controllo di qualitá
ROADSTAR.
Vi ringraziamo di aver acquistato un nostro prodotto
per il vostro piacere d’ascolto.
Prima di procedere all'utilizzo dell'apparecchio,
leggete attentamente il manuale distruzioni e
tenetelo sempre a portata di mano per futuri
riferimenti.
Seu novo aparelho foi construido e montado sob o
estrito controle de qualidade da ROADSTAR.
Agradecemos por ter comprado nosso produto para
a sua diversão.
Antes de usar esta unidade é necessário ler com
atençâo este manual de instruções pare que possa
ser usada apropriadamente; mantenha o manual
ao seu alcance para outras informações.
Your new unit was manufactured and assembled
under strict ROADSTAR quality control.
Thank-you for purchasing our product for your music
enjoyment.
Before operating the unit, please read this instruc-
tion manual carefully. Keep it also handy for further
future references.
Votre nouve appareil a été fabriqué et monté en
étant soumis aux nombreauxtests ROADSTAR. Nous
espérons que cet appareil vous donnera entre sat-
isfaction.
Avant de vous adonner à ces activités, veuillez lire
attentivement ce manuel d’instructions. Conservezle
à portée de main à fin de référence ultérieure.
Vuestro nuevo sistema ha sido construido según las
normas estrictas de control de calidad ROADSTAR.
Le felicitamos y le damos las gracias por su eleccn
de este aparado. Por favor leer el manual antes de
poner en funcionamiento el equipo y guardar esta
documentación en case de que se necesite
nuevamente.
LCD-7111KL
REMOTE CONTROL
1
2 3 4 5
6
7
8
9
10
16
11
12
13
14
15
3
1
2
10
4
6
5
11
EnglishEnglish 1 2
LCD-7111KL
7 inch (17.8 cm) TFT-LCD Colour TV/Monitor with 256 memories and Remote
Control.
FUNCTIONS AND CONTROLS
1. Power/Standby Indicator
2. Remote Control Sensor
3. Power Switch
4. TV/AVSwitch
5. MENU Switch
6. Volume Down Control
7. Volume Up Control
8. Channel Down Button
9. Channel Up Button
10. Built In Speakers
11. Antenna Jack
12. AV IN Jack
13. Headphone Jack
14. Power Source Input Jack
15. Stand Holder (Plastic)
16. Rotary Telescopic Antenna
WARNINGS
The exclamation point within the triangle is a warning sign alert-
ing the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle
is a warning sign alerting the user of “dangerous voltage” inside
the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit operates on 12VDC/230V ~ 50Hz. If the unit is not used
for a long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain. During heavy
rains with lightnings unplug TV from mains.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains in
OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not exposethis unit to directsunlight or heat radiating sources.
Make sure all batteries are inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1
month), remove all batteries from their compartment to avoid
possible leaking.
EnglishEnglish 3 4
REMOTE CONTROL
1. Stand By Button
2. Mute Mode
3. AV Switch
4. Number Selector(0~9)
5. Volume Down Control
6. Channel Up Control
7. Enter Button
8. Volume Up Control
9. Channel Down Control
10. Auto Search
11. Single/Two/Three Digits Selector
Battery Installation:
1. Open the Battery drawer by pulling it out.
2. Insert a CR-2025 battery in the Battery drawer.
3. Close the Battery drawer.
Operation:
Aim the Remote Control to the Remote Sensor (2) on the unit.
Maximum operation Range: 5 m.
POWER SUPPLY
Mains operation with PowerAdapter
For use with 230V AC house current, plug the AC/DC cable of the Power Adaptor
(supplied) to the 12V IN jack (14) and the Power Adaptor to a 230V AC wall outlet.
Press the Main Power switch (3) to ON.
Car battery operation
The car cigarette lighter adapter cable (supplied) is useable with this unit for direct use in
any 12V negative ground vehicle. Simply insert the small plug of the cable into the
matching DC jack (14) on the side of the unit and the other end into the cigarette lighter of
the vehicle. The unit can operate between 11 and 15 V DC.
INSTALLING & OPERATING INSTRUCTION
1. Plug the power cord of the AC/DC adapter (included) one end to the DC 12V IN (14)
on the unit and the other end to the 230V outlet.
2. Press the POWER button on the unit (3) unit or on the remote control (1).
3 Pull out the ROD ANTENNA (16) easily and adjust the angle / heading to the best
position to receive TV signals.
4. To turn Offthe unit, press the POWERSWITCH (3).
VOLUMEADJUSTMENT
The Volume can be adjusted directly by pressing the [VOL]and [VOL] Buttons (6,7)
on the unit or [VOL +/- ] Buttons on the remote control (5,8).
MENU OPERATION
VIDEOCONTROL
To press CH knob to enter.
To press select V+ or V- to the 0-100 unit as desired.
-Brightness
To adjust the picture if it s too bright or dark.
-Contrast
To adjust the picture if it s too bright or dark.
-Color
To adjust the color density.
-Sharpness
To adjust the picture to clear.
-Tint
To adjust the best color under N system signal.
SETUP CONTROL
-Language
Press CH+ or CH- knob to enter & Press V+ or V-to select language in English (Eng)
/Deutsch (DEU)/Spanish(ESP)/Italian(ITA) /French(FRAN)L/Portuguese(PORT).
-Background
Press CH+ or CH- knob to enter & Press V+ or V-to set ON/OFF, it will becoming
blue screen when no signal.
-Mode
Press CH+ or CH- knob to select the MODE , Keep pressing knob to select
NORMAL (4 : 3) or Wide(16:9)
EnglishEnglish
-UV REV
Press CH+ or CH- knob to enter & press V+ or V- to reverse the picture up or down
-RLREV
Press CH knob to enter & press V+ or V- to reverse the picture left or right.
TUNECONTROL
--C-SYS
To press the CH+ or CH- knob to set the C-SYS. Press V+ or V- to change the TV color
system inyour countries. E.g.: PAL & PAL-M & PAL-N & NTSC358 & NTSC433 &
SECAM& SECAM--L
(Under AV mode, PAL/NTSC 358 for selection)
-S-SYS
To press CH+ or CH- knob to enter & press V+ or V- to set the Audio System in your
countries.E.g. I &D/G& M & D/K
-Channel
To press CH+ or CH- knob to enter & press V+ or V- to change the TV channel by manual.
-Auto Install
To press CH+ or CH- knob to enter & press V+ or V- to auto searching the TV channel L-
H-U in order
Note: Set the C-SYS and S-SYS before select system in your countries.
--Search
To press CH+ or CH- knob to enter & press V+ & V- to searching the TV channel
--Band
To press CH+ or CH- knob to enter & press V+& V- to set the TV Band UHF,VHF-L,VHF-H
--Fine Tune
To press CH+ or CH- knob to enter and press V+ & V- one by one to fine tune the signal
of the TV channel
--Skip
To press CH + or CH-knob to enter & press V+& V- to select skip ON by the TV
channel through the CH+/CH- knob on the remote control if you want. To
select skip off to release or press the number on the remote control directly
to display.
-PG Exchange
To press CH+ or CH- knob to enter & display:
Press CH knob to select the row & press V knob to select the channel number. E.g. To
change the frequency signal of channel 8 to the frequency signal of channel 3 as above.
Press V knob to confirm and press menu to release
TIMECONTROL
--Clock e.g. 02:12(Display the operating time)
Press CH+ or CH- knob to enter & press the number knob on the remote control
to set the time. e.g.19:20 to enter 1920.
--OFF e.g. --:-- (To set the time for auto-off)
Press the number knob on the remote to set the auto-off time.
--ON e.g. --:-- (To set the time for auto-on)
Press the number knob on the remote to set the auto-on time.
--ON Channel e.g.--:--(To set on the channel when switch on)
Press the number knob on the remote to select the channel that you desired when
switch on.
Press MENU to quit after finished.
ACCESSORIES
- Remote control
- AC/DC Adapter
- Car Adapter
- A/V RCA Cable
- 3.5 mm 75 Ohm Adaptor cable
IMPORTANTSAFEGUARDS
Avoid places with excessive humidity or near water or touching the TV set with wet hands.
Avoid places with extremely high or low temperatures, dust, or subject to excessive
sunlight, in a vehicle also. Avoid applying strong shocks to the set.
Do not use any chemical solvent (alcohol, benzine, thinner, etc.) for cleaning the TV set.
Do not disassemble or alter the TV set.
5 6
Channel
PG Exchange
3
0(e.g. Press V knob to enternumber 8)
EnglishEnglish
TROUBLE-SHOOTING
SYMPTOMSANDPOSSIBLECAUSES
A) No picture, No sound
- Check Power cord connection
- Switch Power to ON
B) Good picture, No sound
- Press Volume + button
- Check if Mute function is inserted. In case press Mute button again
C) No picture, Good sound
- Adjust brightness control
D) No colour
- Adjust the colour control
-Check the Tuning with FINE Tuning
E) Snowy picture, Noisy sound
- Check and move the antenna
F) Dotted line or stripes
- This may be caused by local interference (e.g. cars, neon signs, hair dryers, etc)
Adjust the antenna for minimum interference
G) Double images or ‘Ghosts’
- This may be caused by reflections from nearby mountains or buildings.
H) Remote control malfunction or reduction in operating distance
- Check battery terminals or replace batteries
- Clean indicator window (remote sensor) (2)
7 8
SPECIFICATIONS
SCREENTYPE LCD-TFT
SCREEN SIZE 17.8 CM (7")
TELEVISIONSYSTEM PALB/G,D/K,I
SECAML,B/G,D/K
NTSCPLAYBACK
RECEIVABLEFREQUENCIES VHF-L 48.25-160.25MHz
VHF-H 168.25-464.25MHz
UHF 471.25-863.25MHz
MEMORIES 256
VIDEOIN 1Vp-p (75 Ohm)
AUDIOIN 500-700 MV (RMS) 47KOhm
DISPLAYRESOLUTION 1440(H) X 234(V) dots
AUDIOOUTPUT 0.25W(MAX)
POWERSUPPLY DC 11V-15V (1A)
POWERCONSUMPTION 11 W
DIMENSION 224(L) X 147(H) X 39(D)
WEIGHT 850 g
Due to continuing improvements, the features and design are subject to change without
notice.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Roadstar LCD-7111KL Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI