Assembly Instructions
for Plastic Deck Wagon
www.millside.ca
2
www.millside.ca
Step 1: Wheel
Installation
First slide plastic
washer onto axle,
then slide wheel onto
axle with hub facing
in. Secure wheel onto
axle with plastic cap
and cotter pin. Clinch
cotter pin at bottom to
secure the cap onto
the axle. Repeat this
for all 4 wheels.
3
Call 866-449-4343 with assembly questions
Step 2: Handle
Installation
First insert metal
handle and
bushings into
tongue of wagon,
then slide bolt
through and fasten
with nut.
Not suitable for children under 3 years old. Contains
small parts which could be swallowed. Tire pressure
must not exceed 30 PSI.
Plastic Deck Wagon - Exploded Parts View
Part # Description
P1 Metal Handle
P2 Poly D Grip
P3 Right Front Wheel Spindle
P4 Left Front Wheel Spindle
P5 Poly Short Tongue
P6 Poly Split Pucks x2
P7 Handle Nut & Bolt
P8 Front Steering Assembly D
P9 Front Poly Brace
P10 Poly Tie Rod
P11 4” x 10” Pneumatic Tire / Rim x4
P12 Wheel Cap
P13 Cotter Pin
P14 Right Rear Poly Brace
P15 Left Rear Poly Brace
P16 Small Plastic Bushing x4
P17 Rear Poly Axle Assembly
To order replacement parts please call 866.449.4343 or 519.669.4343
1
2
3
14
4
15
16
16
16
16
6
6
7
5
8
10
9
11
17
13
12 11
1111
/
