Note: Please read this manual carefully and keep for future reference.
Thank you for supporting us on Indiegogo!
Your contribution helped us to bring the Airdog green technology air purifier to market. Thank you for joining our team to reduce waste
and protect our planet.
Your new Airdog air purifier contains our advanced ionic wind technology. It includes a pre-filter, a washable electronic filtration core
and a replaceable catalytic composite filter, which removes odors, decomposes volatile organic compounds (VOC), and converts
ozone back to oxygen.
These technologies can provide broad protection against airborne particles down to 14.6nm, including many that traditional HEPA
filters leave behind: Bacteria, mold, viruses, fungi, chemical fumes and odors. It offers you a healthier, cleaner home environment.
The Airdog purifier has been thoroughly tested to meet our own exacting quality control standards for your long-term safety.
Click on our Twitter, Facebook and Official Website.
For customer support, please contact support@siliconvalleyairexperts.com
About Your Airdog X5 Air Purifier
2
Table Contents
2.General Safety Imformation / WARNING ---------------------------4
1.About Your Airdog X5 Air Purifier ---------------------------2
3.Caution / Ozone Concerns ---------------------------5
4.Packing List / Components ---------------------------6
5.Installation Guide ---------------------------7
6.Air Purifier Operation Instruction ---------------------------8
7.Display and Air Quality Indicator Instruction ---------------------------9
8.Cleaning and Maintenance ---------------------------10
9.Care of Composite Filter ---------------------------11
10.App Setting ---------------------------12-13
11.Customer Service ---------------------------14
12.Q&A ---------------------------15-16
13. Airdog X5 Manual ---------------------------17
WARNING
GENERAL SAFETY IMFORMATION
•Read this manual carefully before you operate the air purifier. Failure to do so may result in serious injury or death.
•Do not connect to a stable power supply until you have installed all components.
•Do not use the purifier when power cord or plug is damaged as it may result in electric shock, serious injury or death. Have a
qualified technician replace damaged cords or plugs.
•Do not operate air purifier with wet hands as this may result in electrical shock, serious injury or death.
•Do not modify the purifier without the help of a qualified electrician. Please contact our customer support for assistance.
•Do not use your Airdog near any open window as rain may create an electrical hazard. Do not expose your Airdog to wet or
damp conditions.
•Do not immerse the Airdog air purifier in water or any other liquid.
•Do not reach for an Airdog air purifier that has fallen into water. Unplug it immediately.
•Do not block the Airdog’s outlet/inlet when operating or put it in a soft surface where the air openings may be blocked.
•Do not insert any object into the air outlet /inlet as it may damage the device or lead to injury.
•Do not remove the collecting plate without turning off the power supply.
•Do not touch the inside parts after removing the filter. A small amount of static charge may still be present if the unit was just
turned off.
Please Read All Instructions Before Using This Product !
4
Cantion
•Remove all packing materials (bags, cardboard, foams, etc.)
•Use the correct electrical supply voltage for safety.
•Turn the Airdog off before unplugging it from the electrical outlet.
•Monitor children carefully when operating your Airdog near them, even when the purifier is in child lock mode.
•Follow our official cleaning instruction video to clean and maintain your Airdog for long-term safety.
•Make sure the filter is completely dry before placing it back into the Airdog after cleaning.
•After cleaning, always re-install the collecting plate according to the orientation on the label.
•Always put your Airdog in an open, flat, and stable area when operating to avoid any accidents.
•Airdog X5 reaches a maximum of 5ppb (0.005ppm) ozone after testing for 24 hours in an enclosed room according to EN60335
(equivalent to UL 867 standards). This is lower than the ambient ozone level in most environments.
Ozone Concerns
5
Components
Front/Side Back Internal Structure
Notes：Wording in order from left to right and from up to down in order to correspoonding to the words on graph
6
Air Purifier Main Body × 1 Collecting Plates× 1 Remote Control × 1 Cleaning Brush × 1
Packing List
Installation Instructions
1.Take the collecting plates out of the foam box;
2. Use the pull handle to open the back shroud (Pic1);
3.Insert the collecting plates in the orientation described on the label (Pic2);
4.Place the air purifier in an open location to achieve the best cleaning efficiency;
7
Air Purifier Operation Instruction
Children Lock Indicator
In this mode the operation button is locked to prevent children from playing with the purifier.
The purifier may be controlled or unlocked only with the remote control or smartphone app.
Auto mode Indicator Light
When this light on, the air purifier is running under automatic mode. It automatically senses the air
quality and adjusts its running speed according to the air quality level. This is the most energy
efficient mode and we recommend keeping the purifier in this mode most of time.
Auto Indicator Light
When this light on, the air purifier is running under automatic mode. It automatically senses the air
quality and adjusts its running speed according to the air quality level. This is the most energy
efficient mode and we recommend keeping the purifier in this mode most of time.
Wind Speed Indicator Light
A short press ( approximately 1 second) turns the power ON. A long press (over 3 seconds) turns the power
OFF.
When power is ON, each short press cycles through auto-mode ON/OFF, different fan speeds, sleep mode,
etc…Check indicator lights to understand each operation mode.
Sleep Mode Indicator
In sleep mode, your air purifier is still cleaning your air but in
quieter low-speed mode. Also to avoid light disturbance, all
display lights are OFF.
WIFI Indicator (Blue light)
When the indicator is flashing the
purifier is in pairing mode;
8
Display and Air Quality Indicator Instruction
AQI (Air Quality Index),
this is a calculated air quality index based on the particle numbers that
the sensor measures in the air. Ranges from 0-500.
Cleaning reminder
When “C” appears on the display instead of AQI numbers, it reminds
you to wash the collecting plates. Press and hold the “Reset” button for
6 seconds to cancel the reminder once the collecting plates are washed
or cleaned.
Fault Display
When the display shows “9XXX”, please contact our customer service
We will promptly respond to your request or have our local team to
contact you.
Yellow Green:
Good
35ug/m3 < PM 2.5 ≤ 75ug/m3
Green:
Excellent
PM 2.5 ≤ 35 ug/m3
Wind Speed Indicator
L1-L4, slow to fast.
Notes:
1. Results based on the real-time monitoring about particles by using build-in sensor.
2. Results affect by the position and height even it is nearby areas.
Yellow:
Moderately Polluted
75ug/m3 < PM 2.5 ≤ 150ug/m3
Red:
Hazardous
PM2.5 > 150ug/m3
9
Cleaning and Maintenance
Air quality sensor cleaning
The Airdog air purifier has an embedded air quality sensor. To keep the air
quality sensor reading correctly, please clean the sensor as illustrated every 6
months, using dry cotton swabs as illustrated.
Cleaning and Maintenance
•We recommend a complete cleaning every 6-12 months.
•First, unplug the power supply. Open the back shroud, pull out the ionization wire frame and collecting plates. Pull
out the protective rubber sleeve as illustrated in (Pic 1).
•Clean the ionization wire frame and collecting plates properly according to the previous instructions.
•Use a wet cloth to wipe down all surfaces of the protective rubber sleeve, as illustrated. Clean the sleeve
completely, including the notches
•Clean the inner walls of the air purifier with a wet cloth;
•Dry the parts completely, then put them back in order.
10
Care of Composite Filter
The composite filter is composed of an composite catalyst, a formaldehyde removal
catalyst, and active carbon. In principle the catalyst is not involved in the reaction and
should not be changed. However, if the catalyst becomes coated with dust and moisture
then the catalytic effect will decrease. Protect the device with the provided cover whenever
it is not powered up to help extend the catalyst life. A periodic sunbath for 1-2 hour may
also help to reduce the moisture build up and reactivate the catalytic effect.
The shelf life of the composite filter depends on how much you use the purifier. Change the
composite every year or two, or whenever you notice a significant decrease in the purifier’s
ability to remove odors from the air.
11
App Setup
•Download the App by scanning the matrix code on the back of the air purifier or search “Airdog X5” in the Google Play or or Apple App
store;
•Register an account on the App;
•Pair your air purifier with your mobile device
–Turn on your house wifi connection;
–Press the “WIFI” Button on the Airdog remote controller;
–Open the Airdog App and add a device;
–Confirm the wifi user name and password after adding the device;
–Start connection….
•(Note: Once you begin the pairing process, you have about 1 minute to add the device and confirm the wifi information on the App.)
12
App Workflow Chart
13
Customer Service
Warranty
We will repair or exchange your purifier at no cost if it malfunctions within 1 year of purchase.
After 1 year, the cost of repair or exchange will be based on the actual cost of parts and labor.
Please contact our customer support via email support@siliconvalleyairexperts.com
for further assistance.
Disclaimer
The following situations shall not provide free repair, exchange or return service even within the 1
year warranty period:
1.Malfunction or damage caused by natural disaster or abnormal voltage, public disaster or
chemical corrosion.
2.Malfunction or damage caused by opening the air purifier without turning the power off.
3.Damage to the inner walls or air inlets of the purifier due to lack of proper cleaning.
4.Repair, modification or disassembly by unauthorized agents.
5.Malfunction or damage caused by use, maintenance and storage without following the requires of
instruction manual.
6. Other malfunctions or damages caused by user error.
14
Q&A
Q1: Air purifier is producing popping or crackling sounds
Why: Large particles are entering the air purifier or the collecting plates are severely fouled.
Solution: Clean the ionization wires and collecting plates. Using a sponge, wipe the ionization wires gently to avoid breaking them.
Q2: Display is showing a symbol as “-[-”.
Why: The collecting plates are severely fouled.
Solution: Clean the collecting plates and cancel the “cleaning reminder” as outlined on page 5.
Q3: Insensitive display for PM 2.5 concentration
Why: Sensor malfunction, or dirt has accumulated on the sensor.
Solution: Clean the sensor. If the problem persists, please contact customer service at support@siliconvalleyairexperts.com
Q4: Inefficient purifying effect
Why1: The air purifier is placed in an unventilated place or surrounded by obstacles.
Solution1: Move the air purifier to a ventilated place or clear obstacles from around the purifier.
Why2: The collecting plates are severely fouled.
Solution2: Clean the collecting plates.
15
Q&A
Q5: The collecting plates is not working.
Why: Damage to the collecting or generating electrode.
Solution: Contact customer service at support@siliconvalleyairexperts.com
Spare parts are available at our Amazon store.
Q6: The air purifier is producing unpleasant odors.
Why1: This may occur when you first use the unit, if it has been in its packaging for too long.
Solution1：Put the air purifier in a ventilated place for some time before use.
Why2: After a period of use, the collecting plates may have accumulated some odorous dust.
Solution2: Clean the collecting plates. Refer to the cleaning and maintenance section for details.
Q7: The smartphone app is failing to pair with the purifier.
Why1: The Wifi connection to which you are trying to pair the purifier is not stable.
Solution1: Make sure your Wifi is stable.
Why2: The air purifier is unplugged.
Solution2: Plug in the purifier and repeat the pairing procedure.
Maintenance video instructions
https://drive.google.com/file/d/0B8qan25CgaigNkxJVTlLYU9KSVU/view?usp=sharing
16
Silicon Valley Air Expert Inc. All rights reserved. All marks, text, logos, product configurations and registered trademarks are owned and used
under the authority of Silicon Valley Air Expert Inc.
Airdog X5 Manual
X5
40 *
340
100
P4/F4
≤5 (Safety Standard≤50)
≤65
55
100-240V~ 50/60Hz
10.7
0.65 (H) *0.316 (L) *0.306 (W)
Model
Applicable area
CADRParticle (m³/h)
CADRFormaldehyde (m³/h)
CCMParticle/CCMFormaldehyde
Ozone (ppb)
Noise (dB(A))
Rated Power (W)
Power
Weight (kg)
Size (m)
All figures above are all under the national standards of Air Purifier
*Based on the national standards S=0.12Q (CADRParticle)
17
THANKS
/
