PRESONUS StudioLive 32 User guide

Advanced AVB Integrator

Application Guide

www.presonus.com

®

English

Table of Contents

1 Overview — 1

1.1 Introduction — 1

2 Installation Checklist — 2

2.1 Pre-Installation — 2

2.2 Networking Setup — 2

2.2.1 Control Network - Wired Ethernet — 2

2.2.2 Control Network - Wireless (WiFi)

Ethernet — 2

2.2.3 Networking Setup - Audio Network — 3

2.3 Basic StudioLive Mixer Setup — 3

2.4 Basic NSB Setup — 3

2.5 Basic EarMix 16 Setup — 4

3 Firmware Update Instructions — 6

3.1 StudioLive Series III Console Mixers — 6

3.1.1 Update Using an SD Card — 6

3.1.2 Update from UC Surface

(No Internet) — 7

3.1.3 Update Using UC Surface

(Internet Access) — 9

3.2 StudioLive Series III Rack Mixers — 11

3.2.1 Update Using UC Surface Drag and Drop

(No Internet Access) — 11

3.2.2 Update Using UC Surface

(Internet Access) — 13

3.3 NSB Stage Boxes — 15

3.4 EarMix 16M Personal Monitor Mixers — 19

3.5 SW5E AVB Switch — 22

3.5.1 Additional Web Tool Interface

Features — 25

4 Applications — 26

4.1 StudioLive Series III Console Mixer

with NSB Stage Box — 26

4.2 StudioLive Series III Console

with Rack Mixer — 30

4.2.1 Monitor Mixer Mode — 32

4.2.2 Stagebox Mode — 34

4.2.3 Editing Default AVB Inputs — 36

4.2.4 Preamp Control — 36

4.3 StudioLive Series III Consoles: FOH

and Monitor Mixer Mode — 37

4.4 StudioLive Series III Console Mixer

and EarMix 16M — 41

4.5 Putting It All Together:

Real World Example — 43

5 Using AVB Streams

from Multiple Sources — 50

5.1 AVB Input Stream Routing

and Digital Patching — 50

6 Troubleshooting — 51

6.1 System Veriﬁcation Checklist — 51

1

1 Overview

1.1 Introduction

Advanced AVB Integrator

Application Guide

1 Overview

1.1 Introduction

Welcome to the PreSonus Ecosystem! As a solutions company, we believe the

best way to take care of our customers (that’s you) is to ensure that you have the

best possible experience from the beginning of your signal chain to the end. In

order to achieve this goal, we’ve prioritized seamless integration throughout every

design phase of the StudioLive Series III AVB ecosystem products from day one.

This Advanced AVB Networking Guide is designed to provide all the set-up

information you need for your StudioLive products in a single location as well

as to oﬀer resources to help manage and troubleshoot large AVB networks.

Before you begin, here are some guidelines to help ensure

the best networking experience possible:

2

2 Installation Checklist

2.1 Pre-Installation

Advanced AVB Integrator

Application Guide

2 Installation Checklist

Please print out and complete this checklist and save for your records.

2.1 Pre-Installation

 Register all StudioLive Series III Ecosystem products at

My.PreSonus.com or using the My PreSonus app.

 My.PreSonus account username: _________________________

 Update all StudioLive Series III Ecosystem product ﬁrmware.

 See Section 3.1 for StudioLive Series III console mixer ﬁrmware

update instructions.

 See Section 3.2 for StudioLive Series III rack

mixer ﬁrmware update instructions.

 See Section 3.3 for NSB-series stage box ﬁrmware update instructions.

 See Section 3.4 for EarMix 16M personal monitor mixer ﬁrmware

update instructions.

 See Section 3.5 for SW5E AVB switch ﬁrmware update instructions.

2.2 Networking Setup

2.2.1 Control Network - Wired Ethernet

Ethernet cabling.

 Cable length cannot exceed 100M (300’) or 7 hops (whichever comes ﬁrst).

 CAT 5, CAT 7, and CAT 8 cables are not recommended.

 It is recommended all wire and connectors meet

or exceed ANSI/TIA-568-C.2 standard.

 Control Network (Select cable type):

Cable Brand Name: _______________________________________

Cable Type UTP Shielded Ethercon

 CAT 5e 

 CAT 6 

 CAT 6A 

2.2.2 Control Network - Wireless (WiFi) Ethernet

 Wireless Router for Control Network

 Router is exclusive to StudioLive network (Circle One) Yes / No

 Wireless Router Make and Model Number: _______________

 Wireless Network Name:______________________________

 Wireless Network Password:___________________________

 Wireless Router SSID:________________________________

 (if applicable) Access Point(s): _________________________

 Connect router to the primary StudioLive mixer’s Control

Port. See Section 4.2 for connection diagram.

 Use router’s LAN ports for connections to any StudioLive Series III

Ecosystem Product. Do not use the Main Internet or WAN port.

NOTE: If multiple AVB devices with switch capabilities are plugged into the same

router, and the router is also connected to the control port on a console, AVB

traﬃc may be forwarded to the control port of the console which would cause

the console to freeze.

3

2 Installation Checklist

2.3 Basic StudioLive Mixer Setup

Advanced AVB Integrator

Application Guide

 Conﬁgure router for DHCP for UC Surface and QMix-UC connectivity.

 Ensure all wireless devices (smartphones, tablets, etc.)

are running the latest operating system.

 Ensure all wireless devices (smartphones, tablets, etc.) have

the latest version of UC Surface or QMix-UC installed.

 Ensure the wireless control connection is accessible by UC Surface

and QMix-UC at all necessary positions in the facility.

 Ensure the wireless channel on the router is free of other wireless traﬃc.

 Select optimum wireless radio channel that is most likely not to be used

by other devices in the same wireless spectrum at same installation.

2.2.3 Networking Setup - Audio Network

Ethernet cabling.

 Cable length cannot exceed 100M (300’) or 7 hops (whichever comes ﬁrst).

 CAT 5, CAT 7, and CAT 8 cables are not recommended.

 It is recommended all wire and connectors meet

or exceed ANSI/TIA-568-C.2 standard.

 AVB Network (Select cable type):

Cable Brand Name: _______________________________________

Cable Type UTP Shielded Ethercon

 CAT 5e 

 CAT 6 

 CAT 6A 

 AVB Network Switches

 Use only AVB switches, like the PreSonus SW5E, for all

AVB traﬃc. Note: Do not use Netgear AVB switches.

 Update AVB switch ﬁrmware. See Section

3.5 for SW5E update instructions.

2.3 Basic StudioLive Mixer Setup

 Set IP Mode to Dynamic (default) either from the console mixer’s UCNET

screen or Networking tab in the Settings menu in UC Surface.

 Set the permissions for all your remote devices (FOH, All Auxes, etc.).

 For mixers with FOH permissions, enter the default

access code in UC Surface (12345).

2.4 Basic NSB Setup

 Update Firmware. See Section 3.3 for instructions.

 Connect NSB stage box to AVB Network.

 Power the NSB stage box on.

 Set primary mixer’s network clock to “Internal” (default).

 Route AVB Network streams from mixer to NSB stage box.

Note: An AVB Output source is required for Network clock,

even if the NSB stage box outputs are not in use.

 Route AVB Network streams from NSB stage box to mixer.

 Change channel source to “Network” for any mixer

channel sourced from the NSB stage box.

See Section 4.1 for complete set-up instructions.

4

2 Installation Checklist

2.5 Basic EarMix 16 Setup

Advanced AVB Integrator

Application Guide

2.5 Basic EarMix 16 Setup

 Update Firmware. See Section 3.4 for instructions.

 Connect EarMix 16M to AVB Network. Note: AVB Switches with

PoE, like the PreSonus SW5E, will provide power in addition to

audio. If PoE is not available, use the included power supply.

 Power the EarMix 16M on.

 Route AVB Network streams from the mixer to the EarMix 16M.

See Section 4.3 for instructions.

Note: You must assign an input stream to EarMix 1-8 for proper clocking.

Model / Device Name Serial Number Firmware

Version Date Location

StudioLive Series III

Consoles

Model / Device Name Serial Number Firmware

Version Date Location

StudioLive Series III

Rack Mixers

Model / Device Name Serial Number Firmware

Version Date Location

NSB Stageboxes

Model / Device Name Serial Number Firmware

Version Date Location

EarMix 16M

5

2 Installation Checklist

2.5 Basic EarMix 16 Setup

Advanced AVB Integrator

Application Guide

Model / Device Name Serial Number Firmware

Version Date Location

SW5E

Use the 5 numbered lines to note

what piece of equipment is con-

nected to each port on your SW5E.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

6

3 Firmware Update Instructions

3.1 StudioLive Series III Console Mixers

Advanced AVB Integrator

Application Guide

3 Firmware Update Instructions

3.1 StudioLive Series III Console Mixers

StudioLive Series III console mixers can be updated either by using an SD card

loaded with the ﬁrmware update ﬁle, or by using UC Surface on computer

with and without Internet access. These sections will explain both options.

3.1.1 Update Using an SD Card

1. Download the ﬁrmware update ﬁle for your StudioLive Series III mixer from the

My Product page in your My.Presonus account. Please review all instructions

before updating your mixer.

2. Open the folder to which you downloaded the .zip ﬁrmware ﬁle. It will be

named with your mixer’s model number and the new ﬁrmware version (e.g.

SL32sIII_1.0.11489.zip).

3. Depending on your system preferences, the ﬁrmware folder may not

automatically decompress the .zip ﬁle. To unzip/decompress the ﬁle, simply

double-click it. On PC, right-click and select Extract All.

4. In the unzipped folder, you will ﬁnd the ﬁrmware update ﬁle. The ﬁle will be

named as follows:

•StudioLive 16: ad16upgrade.img

•StudioLive 24: ad24upgrade.img

•StudioLive 32: ad32upgrade.img

•StudioLive 32SC: as16_scupgrade.img

•StudioLive 32SX: as24_sxupgrade.img

•StudioLive 32S: as32_supgrade.img

•StudioLive 64S: ad64upgrade.img

7

3 Firmware Update Instructions

3.1 StudioLive Series III Console Mixers

Advanced AVB Integrator

Application Guide

5. Select the upgrade ﬁle and save it to the root of your SD card. The ﬁle must

be in the top level of your SD card’s directory, not contained in a folder.

Once the upgrade ﬁle has been saved to your SD card, eject it and remove it

from your computer.

6. Power on your mixer and insert the SD card into the SD card slot on the mixer.

7. Press the Home button on your StudioLive Series III mixer.

8. Press the System button on your StudioLive Series III mixer touchscreen.

9. Select Firmware from the touchscreen.

10. Touch the Check for Updates button.

11. When the ﬁrmware ﬁle has been located on your SD Card, you will be notiﬁed.

Press Proceed to begin the ﬁmware update.

12. A progress bar will display the ﬁrmware update status. When the ﬁrmware

update is complete ﬁnished, the mixer will automatically reboot.

13. Once the mixer has rebooted, conﬁrm the ﬁrmware version from the Firmware

screen.

Your StudioLive mixer is now ready to use!

3.1.2 Update from UC Surface (No Internet)

Please Note: While this ﬁrmware update method does not require an Internet

connection while updating your mixer, an Internet connection is required to

download the ﬁrmware update ﬁle itself.

1. Download the ﬁrmware update ﬁle for your StudioLive Series III mixer from the

My Product page in your My.Presonus account. Please review all instructions

before updating your mixer.

Comp Gate

FX CFX D

FX AFX B

EFFECTS MASTER MASTER CONTROL

-2

-12

-24

-36

-48

-65

Ch 6

6

Ch 7

7

Ch 8

8

Ch 9

9

Ch 10

10

Ch 11

11

Ch 12

12

Ch 13

13

Comp Gate

FX CFX D

FX AFX B

-2

-12

-24

-36

-48

-65

1Ch. 1

TB

System Global Lockout Audio Routing

UtilsCapture

Talkback Edit

Voume 0.5 dB

System

Bluetooth Reg.Link Aux Mutes

Fat Ch Load/Paste Firmware

User Button AssignsPermissions

Sample Rate:

48 kHz

Internal

Off

Network Clock:

Show Peak Hold:

Low

Stereo LCR

Med High

High

Pan Mode:

Firmware

Mixer: StudioLive 64S

2.0.XXXX

Nov 19 2019

SD3E123456789

PreSonus

Firmware Version:

Firmware Date:

Serial Number:

Registered To:

Firmware Version

Check for Updates

Mixer: StudioLive 64S

2.0.XXXX

Nov 19 2019

SD3E123456789

PreSonus

Firmware Version:

Firmware Date:

Serial Number:

Registered To:

An update is available from SD Card

NOTE: mixer will automatically restart during update

Firmware Version

Cancel Proceed

Proceed

8

3 Firmware Update Instructions

3.1 StudioLive Series III Console Mixers

Advanced AVB Integrator

Application Guide

2. Open the folder to which you downloaded the .zip ﬁrmware ﬁle. It will be

named with your mixer’s model number and the new ﬁrmware version (e.g.

SL32sIII_1.0.11489.zip).

3. Depending on your system preferences, the ﬁrmware folder may not

automatically decompress the .zip ﬁle. To unzip/decompress the ﬁle, simply

double-click it. On PC, right-click and select Extract All.

4. In the unzipped folder, you will ﬁnd the ﬁrmware update ﬁle. The ﬁle will be

named as follows:

•StudioLive 16: ad16upgrade.img

•StudioLive 24: ad24upgrade.img

•StudioLive 32: ad32upgrade.img

•StudioLive 32SC: as16_scupgrade.img

•StudioLive 32SX: as24_sxupgrade.img

•StudioLive 32S: as32_supgrade.img

•StudioLive 64S: ad64upgrade.img

5. Open UC Surface and connect to your StudioLive Series III mixer.

9

3 Firmware Update Instructions

3.1 StudioLive Series III Console Mixers

Advanced AVB Integrator

Application Guide

6. Click on the Gear icon in the top right corner of the UC Surface window to go to

the UC Surface Device Settings page.

7. Select the upgrade ﬁle on your computer then drag and drop it on the Version

Info section of the Settings page.

8. UC Surface will immediately send the ﬁrmware update ﬁle to the mixer to

begin the ﬁrmware update. A progress bar will show on the mixer’s screen as

the ﬁrmware update proceeds. When it is ﬁnished, the mixer will automatically

reboot .

9. Once the mixer has rebooted, conﬁrm the ﬁrmware version from the Firmware

screen.

Your StudioLive mixer is now ready to use!

3.1.3 Update Using UC Surface (Internet Access)

1. On a computer that is connected to the Internet, open UC Surface and connect

to your StudioLive Series III mixer.

10

3 Firmware Update Instructions

3.1 StudioLive Series III Console Mixers

Advanced AVB Integrator

Application Guide

2. Click on the Gear icon in the top right corner of the UC Surface window to go to

the UC Surface Device Settings page.

3. In the lower left section under Version Info, click the Check Firmware Update

button.

4. UC Surface will connect to your My.PreSonus account and check for an available

ﬁrmware update.

Note: UC Surface requires access to your PreSonus Account in order to check for and

perform the ﬁrmware update. The ﬁrst time you do a network update, you will need

to enter the Username and Password for your my.presonus account.

If you have not created a PreSonus User Account with, please do so and make sure

your account is activated as well.

5. If there is a ﬁrmware update available, you will see the following dialog. Click Yes

to continue.

If your mixer’s ﬁrmware is already up to date, you will see the

following dialog. In this case, you do not need to update the mixer’s

ﬁrmware as it is already up to date. You can click OK to close the

dialog, or Update Anyway to force a ﬁrmware update.

11

3 Firmware Update Instructions

3.2 StudioLive Series III Rack Mixers

Advanced AVB Integrator

Application Guide

6. Once you begin the update, UC Surface will download the ﬁrmware image and

then send it to the mixer to be installed.

Note: The ﬁrmware image ﬁle will be saved to your Downloads folder on your

computer. You will now have a local copy of the ﬁrmware that you can use at a later

time if needed. Because this downloaded ﬁrmware image ﬁle is renamed, if you want

to use it you’ll either need to use the UC Surface drag and drop update method, or

rename the image ﬁle as listed in Sections 2.1.1 and 2.1.2 so you can use the SD card

or drag-and-drop to UC Surface update methods.

7. A progress bar will be displayed on the mixer’s screen showing the ﬁrmware

update status. When the ﬁrmware update is ﬁnished, the mixer will automatically

reboot.

8. Once the mixer has rebooted, conﬁrm the ﬁrmware version from the Firmware

screen.

Your StudioLive mixer is now ready to use!

3.2 StudioLive Series III Rack Mixers

Your StudioLive Series III Rack mixer can be updated in two diﬀerent ways using

the UC Surface software. The following sections will detail each method. Please

be review all instructions before updating your StudioLive Series III Rack mixer.

3.2.1 Update Using UC Surface Drag and Drop (No Internet Access)

Please Note: While this ﬁrmware update method does not require an Internet

connection while updating your mixer, an Internet connection is required to

download the ﬁrmware update ﬁle itself.

1. Download the ﬁrmware update ﬁle for your StudioLive Series III mixer from the

My Product page in your My.Presonus account. Please review all instructions

before updating your mixer.

2. Open the folder to which you downloaded the .zip ﬁrmware ﬁle. It will be

named with your mixer’s model number and the new ﬁrmware version (e.g.

SL32sIII_1.0.11489.zip).

12

3 Firmware Update Instructions

3.2 StudioLive Series III Rack Mixers

Advanced AVB Integrator

Application Guide

3. Depending on your system preferences, the ﬁrmware folder may not

automatically decompress the .zip ﬁle. To unzip/decompress the ﬁle, simply

double-click it. On PC, right-click and select Extract All.

4. In the unzipped folder, you will ﬁnd the ﬁrmware update ﬁle. The ﬁle will be

named as follows:

•StudioLive 16R: ar16upgrade.img

•StudioLive 24R: ar24upgrade.img

•StudioLive 32R: ar32upgrade.img

5. Open UC Surface and connect to your StudioLive 32R mixer.

6. Click on the Gear icon in the top right corner of the UC Surface window to go to

the UC Surface Device Settings page.

13

3 Firmware Update Instructions

3.2 StudioLive Series III Rack Mixers

Advanced AVB Integrator

Application Guide

7. Select the upgrade ﬁle on you computer and then drag and drop it on the

Version Info section of the Settings page.

8. UC Surface will immediately send the ﬁrmware update ﬁle to the mixer and it

will begin the ﬁrmware update. A progress bar will be displayed in UC Surface

showing the ﬁrmware update transfer to the mixer.

9. As the update proceeds on the mixer, the Control LED on the rack mixer will

illuminate solid blue and the Power LED will blink yellow:

Once the update completes, the mixer will automatically reboot.

Note: Update via UC Surface over USB takes noticeably longer than updating with

UC Surface over a network connection. It can take up to ﬁve minutes, so be patient

and allow the mixer to complete the process and reboot. If after ﬁve minutes the

mixer has not rebooted and the Power LED is still blinking yellow, you may manually

power cycle the mixer and check to see if the update has completed. If it has not

updated, it is recommended to disconnect USB and connect the mixer to your

network via Ethernet instead. Once connected, perform the update from UC Surface

over the network connection.

10. Once the mixer has rebooted, conﬁrm the ﬁrmware version from the Firmware

screen.

Your StudioLive mixer is now ready to use!

3.2.2 Update Using UC Surface (Internet Access)

1. On a computer that is connected to the internet, open UC Surface and connect

to your StudioLive 32R mixer.

14

3 Firmware Update Instructions

3.2 StudioLive Series III Rack Mixers

Advanced AVB Integrator

Application Guide

2. Click on the Gear icon in the top right corner of the UC Surface window to go to

the UC Surface Device Settings page.

3. In the lower left section under Version Info, click the Check Firmware Update

button.

4. UC Surface will connect to your My.PreSonus account and check for an available

ﬁrmware update.

Note: UC Surface requires access to your PreSonus Account in order to check for and

perform the ﬁrmware update. The ﬁrst time you do a network update, you will need

to enter the Username and Password for your my.presonus account.

If you have not created a PreSonus User Account with, please do so and make sure

your account is activated as well.

5. If there is a ﬁrmware update available, you will see the following dialog. Click Yes

to continue.

If your mixer’s ﬁrmware is already up to date, you will see the

following dialog. In this case, you do not need to update the mixer’s

ﬁrmware as it is already up to date. You can click OK to close the

dialog, or Update Anyway to force a ﬁrmware update.

15

3 Firmware Update Instructions

3.3 NSB Stage Boxes

Advanced AVB Integrator

Application Guide

6. Once you begin the update, UC Surface will download the ﬁrmware image and

then send it to the mixer to be installed.

Note: The ﬁrmware image ﬁle will be saved to your Downloads folder on your

computer. You will now have a local copy of the ﬁrmware that you can use at a later

time if needed. Because this downloaded ﬁrmware image ﬁle is renamed, if you want

to use it you’ll either need to use the UC Surface drag and drop update method, or

rename the image ﬁle as listed in Sections 2.1.1 and 2.1.2 so you can use the SD card

or drag-and-drop to UC Surface update methods.

7. A progress bar will be displayed on the mixer’s screen showing the ﬁrmware

update status.

8. As the update proceeds on the mixer, the Control LED on the rack mixer will