X-Watch M
User Guide
1. Introduction
1.1 Product details
Power key: Power on/off, awaken /turn off screen, back to home screen.
USB: Charging /Data
Touch Screen: Each function (main menu) will be shown and displayed on capacitive touch
screen. You can enter into Home screen, when you press the power button. Press power button
twice for clock mode. You can set the different clock interfaces, if you press in the middle of the
screen for a long time.
Sliding from up to down on main screen , you can enter shortcut functions for setting interface and
for the functions: Bluetooth music, airplane mode, brightness adjustment .
8
Home screen：
Menu interface：
To change the interface device, press lightly on the screen.
1.2 Specification
Name
Smart watch
LCD
1.2inch round screen
Display
Touch screen,
resolution：240*240
CPU
MT6261
Frequency
GSM 850/900/1800/1900MHz
Memory
32Mb+32Mb
Battery
280mAh
Bluetooth
BT3.0
Pedometer
Support
Sleep monitor
Support
9
2. Product Quickly Use
2.1 Download the software
Download the Fun-Run application using the qr code, or you can download it directly from the
marketplace.
Notice：This application only use for sync between the watch and phone.
If you already have downloaded the related software, please check the version
and use the newest one.
2.2 Install the application
After you have install the application, you will find the FunRun icon on your phone:
Click on the icon application, choose ‘Bluetooth service’ and let all the application functions by
default.
To add new functions, sign in in the application and select Fun Run.
Notice: Please do not turn off Bluetooth when you click on a notification. Otherwise it will
affect the timing of dispositions and the connection with phone.
2.3 Bluetooth connectivity and sync function
2.3.1 Connecticity from phone to watch
Conditions: Make sure the Bluetooth function is activated.
Enter in the phone setting, turn on Bluetooth search for device, choose the Bluetooth
name of the watch and then click to pair both devices.
2.3.2 Connectivity from watch to phone
Go to the watch settings, turn on Bluetooth search for device, choose the Bluetooth name of the
phone and then click to pair both devices.
What brings you a successful connectivity between the phone and watch?
Both devices can find each other. You can looking for your phone via anti lost function.
3. Basic Functions
3.1 Calls
Enter the phone number and call.
3.2 Messages
Please synchronize the clock with the phone agenda to view messages.
10
3.3 Call Records
The smartwatch can view all of the missed calls, dialed or received.
3.4 Contacts
To view the phone contacts on the watch screen, you have to synchronize both devices.
3.5 Bluetooth
Leave the Bluetooth function active to enable the connection.
3.6 Calls via Bluetooth
For calls from via bluetooth, please sync your phone with your watch.
3.7 Notifications
Notifications received on the phone (SMS, missed call, WhatsUp messages, Facebook
notifications, etc.) will be displayed on screen watch.
3.8 Remote Camera
Use the phone's camera remotely via 'remote camera ".
3.9 Music Player
You can listen to your favorite music, listening to songs saved in your phone. For this to be
possible, it is necessary to activate the Bluetooth function.
3.10 Anti lost
You can find your smartphone by using anti lost function.
3.11 Settings
In menu settings you can set the clock time, date, language, display items.
3.12 Pedometer
The Pedometer functions measures the number of steps, distance, speed and calories consumed. Note:
If you want to return to main menu but keep pedometer during the exercise, please don’t
click the pause or reset, you only should press the power button.
3.13 Sleep Monitor
To observe the quality of your sleep, is necessary to wear the watch and have the function activated.
3.14 Remind sedentary
You can select a certain time every day and the clock will remind you of resuming exercise.
Note: You can not use Sendetary Reminder, Pedometer and Monitor Sleep at the same time.
11
Other useful information:
Charge the battery completely before using.
The charging time is 2 hours.
Use the original accessories.
The device will lose the connection if the distance between phone and watch will be too high.
Please reconnect the watch with the phone via Bluetooth, if it’s disconnected occasionally
To see the name of the person calling you, it is necessary to synchronize the phonebook with
the clock.
4. Possible problems when using:
4.1 Unable to open clock?
To open the clock hold around the power button for 4 seconds.
4.2 The clock shuts himself?
If the clock shuts himself, means that the battery is discharged. Recharge your device.
4.3 Time of use too short?
If the time of use is too short, means that the battery is not fully charged.
4.4 The watch does not load?
Battery life is reduced over time.
Check lest the USB cable is damaged.
Check that you have entered the correct cable.
4.5 There appears not on the display, the person name who is calling you?
This situation happens when you forget to sync your clock with the phone.
4.6 The call is interrupted during the conversation?
The devices are too far from each other.
If you have trouble using the X-Watch M, please contact us:
Evolio Technical Department:
Phone: +4021.300.2003
E-mail: suport@evolio.ro
Evolio Service Address: Street Gregory Cobalcescu no. 39, district 1, Bucuresti
Evolio service schedule: Monday-Friday 9:00 to 5:00 p.m.
12
Declaration of conformity
Televoice Grup S.R.L., with headqurtered in Bucharest, District 1, Grigore Cobalcescu no.39 RO15005294,
J40/11378/2002, declare on own responsability, this product Evolio X Watch M, solded in Romania :
Brand: Evolio;
Model: X Watch M
Commercial name: Smartwatch
The electric and electronics equipment solded by our company respect legal terms like: Decision no.
1022/2002, H.G. 497/2003 (electromagnetical compatibility), H.G. 457/2003, modified by decision
1514/2003 (about consumer safety with electric equipment ) and all normative acts, H.G. 992/2005 (about
limited uses of dangerous substances), H.G. 448/2005 about prevention of wastes electrical and electronic
equipment) and UE Directives 2002/95/CE, 1999/5/EC.
The product was evaluated according with the following terms, mentioned in annex II a H.G. 88/2003: EN
62479:2010, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011, EN 301 489-1, EN 301 489-17, EN 300
328.
All documents of the evaluations received from the manufacturer, are stored at our company headquarters.
The all products have inscription CE.
The products warranty are in conformity with O.G. 21/1992, Law 449/2003,Law 296/2004 and O.U.G
174/2008, about consumer protect.
Liviu Nistoran
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Imperii Electronics TE.03.0355.14 User manual
-
Polaroid SW1505 User manual
-
-
Xlyne QIN XW Prime User manual
-
Crypto SW100 User manual
-
-
Nordmende BFW1000HR Quick start guide
-
ProScan PBTW360 User manual
-
Naxa NSW-15 User manual
-
Timex iConnect By Round User manual
