Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
Pa
g
e 1
|
3 Au
g
us
t
2010
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
VESA mount accessory PV01
compatible to the XS35 series
Its optional VESA75/100 wallmount allows it to be installed on to walls
or just affixed on the rear side of a monitor which is particularly
interesting for the industry segment, company buildings and public
institutions.
Feature Highlight
Scope of
delivery
• VESA mount
• 4 screws
Compatibility
• Compatible with Shuttle XS35 series
• Supports 75 and 100mm standards
Shutt
l
e Accessor
y
PV01
Article number: PV01
Images for illustration purposes only.
Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
Pa
g
e 2
|
3 Au
g
us
t
2010
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
XPC Accessory PV01 – Installation Guide
Due to safety reasons, please turn off your computer
completely first and unplug it from the power supply.
Unscrew one screw of the stand mount
and remove the vertical stand.
Fasten the VESA MOUNT at rear of LCD
monitor with four screws.
As shown, install the XS35 in the VESA
MOUNT and push it towards the direction
as indicated by the red arrow.
Check that it is properly aligned, then
tighten securely with one thumbscrew.
c
d
e
f
g
/