Noctua NF-R8-1800 Datasheet

Category
Computer cooling components
Type
Datasheet

This manual is also suitable for

Size
Bearing
Blade Geometry
Input Power
Input Current
Voltage Range
MTBF
Rotational Speed +/-10%
Airflow
Acoustical Noise
www.noctua.at
geräuschoptimierte Premium-Komponenten
sound-optimised premium components
Noctua arises from a cooperation between the Austrian Rascom Computerdistribution Ges.m.b.H and
the Taiwanese Kolink International Corporation and entertains a development partnership with the
Austrian Institute of Heat Transmission and Fan Technology (Österreichisches Institut für Wärmeübertra-
gung und Ventilatorentechnik, ÖIWV). Mail. [email protected]
|
Web. http.//www.noctua.at
NF-R8
80 x 80 x 25 mm
Fan
Lüfter
Ventiladore
Ventilateur
Product
Noctua NF-R8
Warranty
6 Years
Packaging Type Pcs./Colli
Retail 40
80 x 80 x 25 mm
SSO-Bearing
Raised-Blade-Design
1.32 W
0.11 A
4 - 13 V
> 150.000 h
1.800 RPM
53 m³/h
17 dB(A)
80.0 mm
25.0 mm
80.0 mm
with L.N.A.
1.300 RPM
39 m³/h
10 dB(A)
with U.L.N.A.
800 RPM
26 m³/h
7 dB(A)
Self-stabilising oil-pressure bearing
(SSO bearing):
The NF-R8 is equipped with a magnetically
centred, self lubricating oil-pressure bearing that
provides a new level of quietness and long-term stability.
Sound-optimised blade geometry and profile:
The NF-R8 is the first fan employing a novel rotor
which was developed by the Austrian Institute for
Heat-Transmission and Fan Technology (Österreichisches
Institut für Wärmeübertragung und Ventilatorentechnik,
ÖIWV). Thanks to the special optimisation of the blade ge-
ometry towards ultra low noise application, the NF-R8 is up
to 10% more quiet than current high-end fans at the same
flow rate.
Scope of delivery
Ultra-Low-Noise Adaptor(U.L.N.A.)
■ Low-Noise Adaptor (L.N.A.)
■ 4 Vibration Compensators
■ 3:4-Pin Adaptor
■ Screws
  • Page 1 1

Noctua NF-R8-1800 Datasheet

Category
Computer cooling components
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI