Black & Decker GS500 User manual

Brand: Black & Decker

Model: GS500

Type: User manual

Figure 5A

WARNING: Read and understand all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or serious personal injury.

Important Safety Warnings and Instructions

TO REDUCE RISK OF INJURY:

• Before any use, be sure everyone using this garden appliance reads and understands all

safety instructions and other information contained in this manual.

• Save these instructions and review frequently prior to use and in instructing others.

WARNING: When using gardening appliances, basic safety precautions should always

be followed to reduce risk of fire, electric shock, and personal injury, including the following.

• For your own safety before using this accessory with the GS500, DS600, DS700 and the

GS700 or the SSC1000 combo unit, read the particular manual for operation of the units

and read all the safety sections of the instruction manuals.

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

INSTRUCTION MANUAL

Cat No. GSH1000 Form # 90500043 (Sept. ’05)

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-54-HOW-TO (544-6986)

IF YOU SHOULD EXPERIENCE A PROBLEM

WITH YOUR BLACK & DECKER PRODUCT,

CALL 1-800-54-HOW-TO (544-6986)

BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND

DATE CODE (e.g. 20000130M). IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE

YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.

YOUR FEEDBACK IS VITAL TO BLACK & DECKER.

Catalog No. GSH1000

Figure 8

Figure 10

Figure 9

READ ALL INSTRUCTIONS

PREPARING TO OPERATE: (GS500 & DS600)

• Line the axle with the center hole in the wheel and press to end (Fig. 1A).

• Slide the assembled wheel and axle through the axle hole in the unit.

• Lay unit on it’s side and press other wheel on (Fig. 1B).

• Insert the two handle halves as shown in Figure 2. This is a one time assembly DO NOT

disconnect.

• Remove the hinged inlet cover (DO NOT DETACH FROM UNIT) from the handle

mounting hole (Fig. 3A).

• Push handle into handle mounting hole until handle locks (Fig. 3B).

• Push the power connector into the unit, it’s locking tab will lock it to the unit (Fig. 3C).

AUXILIARY HANDLE (Installed on handle tube):

• Push collar into auxiliary handle (Fig. 8A).

• Press auxiliary handle with installed collar onto handle tube and slide spacer (Fig. 8B) into

position. Install bolt (Fig. 8C) through spacer and assemble the wing nut (Fig. 8D) (do not

tighten). Slide auxiliary handle to comfortable working position and tighten wing nut

(Fig. 8D)

PREPARING TO OPERATE: (DS700, GS700, SSC1000)

• Line the axle with the center hole in the wheel and press to end (Fig. 4A).

• Slide the assembled wheel and axle through the axle hole in the handle adapter.

• Lay unit on it’s side and press other wheel on (Fig. 4B).

• Insert the end of the handle tube into the handle adapter as shown in Figure 5A until it

locks.

• Slide the handle adapter on to the appliance as shown in Figure 5B until the locks click.

• Push the power connector into the appliance, its locking tab will lock it to the appliance.

(Fig. 6)

• To remove the adapter from the appliance, squeeze the two levers shown in Figure 7A

and pull the handle adapter off the appliance.

• To remove handle tube from handle adapter, push the unlock button in and pull the

handle out of the handle adapter. (Fig. 7B)

SWITCH:

A SWITCH LOCKING BUTTON is provided on the top of the handle as a safety feature.

Please note the following very carefully.

1. TO TURN TOOL “ON” (Fig. 9) slide the locking button “A” FORWARD with your thumb,

and hold it FORWARD momentarily, while you squeeze the trigger switch “B”. Release

locking button. The trigger has been designed so that it is very easy to hold in the “ON”

position.

2. TO TURN TOOL “OFF” just release the trigger.

REMOVING HANDLE:

• Remove the power connector by pressing the locking tab.

• Slide handle out of the HANDLE adapter.

USE OF YOUR UNIT:

• The UPRIGHT HANDLE installed on the unit may be used to extend your tool’s reach.

(Fig. 10)

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers

with efficient and reliable power tool service. Whether you need technical advice, repair, or

genuine factory replacement parts, contact the Black & Decker location nearest you. To find

your local service location, refer to the yellow page directory under "Tools—Electric" or call:

1-800-54-HOW TO. (544-6986) or visit www.blackanddecker.com.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment should be performed by Black & Decker Service Centers or other qualified service

organizations, always using identical replacement parts.

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material

or workmanship. The defective product will be replaced or repaired at no charge in either of

two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it

was purchased (provided that the store is a participating retailer). Returns should be made

within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the

sale). Proof of purchase may be required. Please check with the retailer for their specific return

policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or

authorized Service Center for repair or replacement at our option. Proof of purchase may be

required. Black & Decker owned and authorized Service Centers are listed under

"Tools-Electric" in the yellow pages of the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and

you may have other rights which vary from state to state. Should you have any questions,

contact the manager of your nearest Black & Decker Service Center. This product is not

intended for commercial use.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are

missing, call 1-800-544-6986 for a free replacement.

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

To be used with units:

Pour utilisation avec les modèles :

Para utilizarlo con las siguientes

unidades:

GS500, DS600, SSC1000

GS700, DS700

Figure 1

Figure 4

For GS500 & DS600

Pour le modèle GS500, DS600

Para GS500, DS600

For DS700, GS700 & SSC1000

Pour les modèles DS700, GS700 et SSC1000

Para DS700, GS700 y SSC1000

Figure 5B Figure 6

Figure 7B

Figure 7A

Figure 3

Figure 2

Page is loading ...

Black & Decker GS500 User manual

Brand: Black & Decker

Model: GS500

Type: User manual

Download PDF

report

in other languages

français: Black & Decker GS500 Manuel utilisateur
español: Black & Decker GS500 Manual de usuario

Black & Decker GS500 User manual

Black & Decker GS500 User manual

in other languages

Related papers

Other documents