LG V-CE641HTG Owner's manual

Model

Language English+Chinese

Page

Material Size(W*H)

Designer

Confirm

Color(cover/body)

Part No. Description

Date

No. Date

Chage Record

Change content

ECO No.

1

2

3

4

5

6

7

8

9

Weight 100g

2009.02.09

V-CE641HTG.CAQPLGT

27

MFL57903810

1/1

150220(mm)

GEYANG

Owners Manual

Page is loading ...

Dust Capacity: 1.5L

V-CE641HTG

220V~ 50Hz

1200W

1400W

300W

5.3Kg

272mm x 414mm x 290mm

Product specifications

Attention before using the appliance

Assembling and adjusting the Cleaner

Parts description and assembly

Accessories

Elbow Tube

How to separate or empty the dust box

How to empty the dust separator

How to clean and assemble the dust box

and separator

Cleaning

Assembling

How to separate, clean and assemble the

protection filter of the motor

Disassembling

Cleansing

How to separate, clean and assemble exhaust filter

Disassembling

Cleansing

Assembling

Check before reporting the trouble

Packing List

15

16~17

18

19

20

21

22

23

24~26

27

15

Page is loading ...

Cord winding

Flexible Hose

Control button

Telescopic tube

Button

18

Nozzle, Crevice

Nozzle, Crevice can be used for cleaning the place hard to reach.

19

20

21

1

3

How to separate or empty the dust box

2

3

Empty the separator.

4

Button

Uncover by pressing the button.

Check if the dust has settled in the dust separator. Separate the cover by holding its handle.

Remove the dust from the small holes in the

cover of the separator.

Detach the dust box by holding its handle. Empty the dust box.

Warning: • Empty the box when the dust settles up to the MAX line.

• Too much dust beyond this line may reduce the inhaling power.

Warning: • Check the inside of the dust separator when cleaning the dust box.

• Clean the inside of the dust separator, because too much foreign substance such as waste

paper or plastic in the dust separator may reduce the inhaling power.

How to empty the dust separator

Using and cleaning the Sani Punch

21

CleaningCleaning

1

2

How to clean and assemble the dust

box and separator

Cleanse the dust box, separator and its

cover with running water.

Attach the cover by inserting the spiral in the

cover into the groove.

3

Attach the assembled dust box to the body of

the cleaner.

Warning: If you move the cleaner by holding the carrying handle with the cover not fully closed, the cover

may open, causing damage to the parts and the dust box. So check if the cover has been properly

closed.

If you use the cleaner without assembling the cover of the dust separator, it will increase the noise

and reduce the inhaling power when cleaning. So check the assembling once again.

Assemble the dust separator and box.

2

Cover the cleaner by holding the carrying

handle of the body.

Dry them in the well-ventilated shade for

a day before using.

AssemblingAssembling

1 2

Warning: Assembling is done in reverse order of disassembling.

If you use the cleaner without assembling the protection filter of the motor, noise increases and dust

gets into the motor when cleaning, thus leading to the shorter life of the cleaner. So check the assembling

once again.

How to separate, clean and assemble the

protection filter of the motor

Disassembling

Cleansing

Button

Uncover by pressing the button. Detach the protection filter of the motor from the

body after disassembling the dust box.

3 4

Separate it from the filter cover by

holding the handle of the case.

1

Clean with running water.

1

Put the filter into

the case.

2

Cover the filter.

3

Mount the assembled filter

and assemble the dust box.

4

Cover the cleaner by

holding the carrying

handle of the body.

2

Remove the water completely.

3

Dry in the well-ventilated shade

for a day before using.

Detach the filter.

22

23

The exhaust filter should be cleaned at least once half a year.

Allow exhaust filter to dry in a shaded location for a dry.

Cleansing

1

Cord winding button

The cord winds up when you press the button.

Insert the spiral of the inhaler into the groove in the back or at the bottom of the body.

How to separate, clean and assemble

exhaust filter

Disassembling

Cover button of the exhaust filter

Cover of the

exhaust filter

Exhaust filter button

Exhaust filter

Shake off the exhaust filter.

How to keep the cleaner after using

2

Insert the exhaust filter and join the cover

properly until you hear the click of the button.

Assembling

You won't be happy to waste money by calling for service when there is no trouble with the cleaner.

Here is good advice to follow for trouble shooting before calling for service. Read the instructions

carefully, and you can remove the trouble by yourself.

Check if the control button of the inhaling power

has been put to “MAX”.

Clean the protection filter of the motor.

Uncover the body by pressing

the button of the cover.

Detach the protection filter of the motor

from the body after disassembling the

dust box.

If inhaling is

not well done?

Stage 1

Disassembling

Cleansing (with cold water)

1

Cleanse it with running water.

1

Remove the water completely.

2

Dry it in the well-ventilated

shade for a day before

using.

3

2

Separate the filter from the cover by

holding the handle of the case.

Detach the protection filter of the motor.

3 4

24

Check before reporting the trouble

Stage 2

Page is loading ...

LG V-CE641HTG Owner's manual

LG V-CE641HTG Owner's manual

Related papers