Delfield DC-L6 Datasheet

DC-L6
Delfield
Brand
Delfield
Model
DC-L6
Type
Datasheet

This manual is also suitable for

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Exterior body is constructed of 0.75” Melamine reinforced
front and rear panels with 22 gauge stainless steel skin and
1” polyethylene horizontal rib supports. Horizontal brace on
rear is constructed of 18 gauge galvanized steel. The exterior
ends are unfinished.
Exterior top is constructed of 14 gauge stainless steel.
Horizontal top supports on front and rear are constructed with
18 gauge galvanized steel.
Interior base bottom is constructed of 16 gauge galvanized
steel. Vertical base support braces are 14 gauge galvanized
steel. Top end supports are 12 gauge stainless steel.
The LiquiTec® cold pan has 2-6 die stamped 19.87” x 11.87”
(50.5cm x 30.2cm) openings with depressed edges. Formed
well below each opening is 6.25” (15.9cm) deep with 0.5” drain
manifold to gate valve. Each well, flush with the top, for flush
mount pans to accommodate 12” x 20” (30.5cm x 50.8cm) pans
4” (7.6cm) or 6” (15.2cm) deep, supplied by others. Product
temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained
at 86˚F (30˚C) ambient room temperature, meeting NSF7
requirements. The cold pan is separated from the exterior top
by a thermal break. Copper refrigeration tubing is attached
to the sides of every well. Eutectic fluid is used as the heat
transfer medium. Cold pan is fully insulated with foamed in
place polyurethane insulation. Cold pans are equipped with
a 0.5” stainless steel drain plumbed to the drain valve located
behind the hinged louvered door.
Refrigeration system uses HFC-404A refrigerant and has a
self-contained 115 volt, 60 Hertz, single phase hermetically
sealed condensing unit with adjustable cold pan thermostat
control.
Legs: Bases mounted on 6.12” adjustable legs.
Specifications
Standard Features
Options &
Accessories
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
Flush mounted pans
Individual 0.5” stainless steel drains
Thermostat for temperature control
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Must be hard wired in field
One year parts and labor standard
warranty
•
•
•
•
•
•
•
•
•
•
DC-L2 Self-contained LiquiTec® cold pan serving counter, fits two standard 12”x20” pans
DC-L3 Self-contained LiquiTec® cold pan serving counter, fits three standard 12”x20” pans
DC-L4 Self-contained LiquiTec® cold pan serving counter, fits four standard 12”x20” pans
DC-L5 Self-contained LiquiTec® cold pan serving counter, fits five standard 12”x20” pans
DC-L6 Self-contained LiquiTec® cold pan serving counter, fits six standard 12”x20” pans
•
•
•
•
•
Models
Concepts™ Serving Systems
Self-Contained LiquiTec® Cold Pan Serving Counter
Concepts™ Serving Systems: Self-Contained LiquiTec® Cold Pan Serving Counter
Custom lengths available per inch
Granite, Hanstone and Solid Surface
top materials
Laminated base panels
Finished stainless steel or laminated
end panels
Décor panels
Graphics packages
FlexiShield® foodshields
Signage with overstructures, lights
and heatlamps
Refrigerated base inserts
Heated base inserts
Dry storage base inserts
Mechanical access doors
Casters (stand alone units only)
Kickplates (units with legs only)
Tray slides
Adapter plates and bars
Remote refrigerant (specify
refrigerant)
220v/50 cycle*
Inclusion of this option will alter
electrical specifications of the unit
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*
DC-L4
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Concepts™ Serving Systems
Self-Contained LiquiTec® Cold Pan Serving
Counter
Printed in the U.S.A.
DSDCL
03/10
Deleld reserves the right to make changes to the design or specications without prior notice.
Specifications
Model Length Depth Height
# of 12”x20”
Pans Held
H.P. V/Hz/Ph Amps BTU Ship Weight
DC-L2 38.00” 36.00” 36.00” 2 1/4 115/60/1 7.0 379 342lbs/155kg
DC-L3 52.00” 36.00” 36.00” 3 1/4 115/60/1 7.0 569 468lbs/212kg
DC-L4 66.00” 36.00” 36.00” 4 1/4 115/60/1 7.0 758 594lbs/269kg
DC-L5 80.00” 36.00” 36.00” 5 1/4 115/60/1 7.0 948 720lbs/327kg
DC-L6 94.00” 36.00” 36.00” 6 1/4 115/60/1 7.0 1138 846lbs/384kg
38.00
[97cm]
36.00
[91cm]
6.12
[16cm]
36.00
[91cm]
52.00
[132cm]
36.00
[91cm]
66.00
[168cm]
36.00
[91cm]
80.00
[203cm]
36.00
[91cm]
94.00
[239cm]
36.00
[91cm]
DC-L2 Plan View
DC-L3 Plan View
DC-L5 Plan View DC-L6 Plan View
DC-L2 Elevation View
DC-L3 Elevation View
DC-L5 Elevation View DC-L6 Elevation View
All Models Right Side View
DC-L4 Plan View
DC-L4 Elevation View
  • Page 1 1
  • Page 2 2

Delfield DC-L6 Datasheet

DC-L6
Delfield
Brand
Delfield
Model
DC-L6
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents