Simplicity Manufacturing 1733180 User manual

Brand
Simplicity Manufacturing
Model
1733180
Type
User manual
1
Supplemental
Instructions
For 38” Frame Hung
Mowers (Snapper)
INSTALLATION
1. Remove the carriage bolts (A, Figure 2), locknuts (B)
and deflector & hinge assembly (C) from mower deck
(D).
2. Place shim (E, Figure 3) between deck (D) and
deflector & hinge assembly (C) as shown. Secure
with carriage bolts (A) and locknuts (B).
Figure 1. Contents
Figure 2. Remove Deflector & Hinge Assembly
A. Carriage Bolts, 5/16-18 x 3/4
B. Locknuts, 5/16-18
C. Deflector & Hinge Assembly
D. Mower Deck
Kit Contents:
Ref. Part No. Qty. Description
1 1733180 1 Shim
This kit is intended for 38” frame hung mowers. It
will open the gap between the mower deck and
the deflector hinge bracket to ease the installation
of some deck mounted attachments.
D
1
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
and disconnect the spark plug wire(s).
WARNING
Form No. 1733181-00
Rev. 4/2006
© 2006 Simplicity Manufacturing, Inc. All Rights Reserved
TP 200-4287-00-SK-SMAN
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
Figure 3. Install Deflector & Hinge Assembly and Shim
A. Carriage Bolts, 5/16-18 x 3/4
B. Locknuts, 5/16-18
C. Deflector & Hinge Assembly
D. Mower Deck
E. Shim
B
A
C
D
B
A
C
E
The mower deflector MUST be properly installed
in the down position and retained by the spring
latch. Operating the unit without the deflector or
the deflector not properly installed will expose
operator and bystanders to rotating blades and
flying debris hazards that can cause amputation
or other injuries.
WARNING
  • Page 1 1

Simplicity Manufacturing 1733180 User manual

Brand
Simplicity Manufacturing
Model
1733180
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents