Dow 99036922 User guide

Type
User guide

This manual is also suitable for

The Dow 99036922 is a versatile polyurethane foam system designed for a wide range of sealing, insulating, and structural applications. This two-component system combines a resin and an isocyanate to create a rigid, closed-cell foam that expands to fill cavities, cracks, and gaps. It offers excellent adhesion to a variety of substrates, including metal, wood, concrete, and masonry. The foam is self-extinguishing and has a high R-value, making it an effective insulator. It is also water-resistant and can be used in both indoor and outdoor applications.

The Dow 99036922 is a versatile polyurethane foam system designed for a wide range of sealing, insulating, and structural applications. This two-component system combines a resin and an isocyanate to create a rigid, closed-cell foam that expands to fill cavities, cracks, and gaps. It offers excellent adhesion to a variety of substrates, including metal, wood, concrete, and masonry. The foam is self-extinguishing and has a high R-value, making it an effective insulator. It is also water-resistant and can be used in both indoor and outdoor applications.

®™Trademark of The Dow Chemical Company (“Dow”) or an affi liated company of Dow
FILL YOUR SEALANT AND INSULATION
NEEDS WITH FROTH-PAK
POLYURETHANE FOAM SYSTEMS
From homes and schools to poultry
houses and semi-trailers, quick-cure
FROTH-PAK
polyurethane foam systems
ll cavities, penetrations and cracks for
air sealing, insulation, sound damping,
structural stabilization and more.*
Available as FROTH-PAK
Foam Sealant
or FROTH-PAK
Foam Insulation (with a
Class-A fi re rating), FROTH-PAK
foam is
an ideal choice for penetrations greater than
2".** FROTH-PAK
foam is available in self-
contained kits and refi llable cylinders for
smaller jobs and larger use demands.
Agriculture
• Light control and insulation in
poultry houses
• Silo and grain storage bin sealant
• Pest control
Air Sealing
• Roof/wall junctures
• New and retrofi t construction
• Odor control
Asbestos Abatement
• Crack, void and hole sealant
• Sealant for irregular voids
• Sealant to maintain negative air
pressure
Cold Storage
• Floor seams
• Fluted roof decks
• Wall-to-wall intersects
Heating, Ventilating, Air
Conditioning
• Pipe (including geothermal)
insulator
• HVAC duct sealant
Insulation
• Stud wall cavity fi ll
• Ceiling/fl oor/wall penetrations sealant
Pool and Spa
• Insulation repair
• Structural support
• Sound damping
Plumbing
• Sealant around copper or PVC pipes
and penetrations
• Bathtub/shower base stabilizer
• Fiberglass bathtub repair
Transportation
• Insulation
• Structural stability
• Sound damping
• Vibration control
Other
• Archaeology fi eldwork
• Elevators, sound damping
A Few Examples of the Possible Uses for FROTH-PAK
Systems
UNITED STATES/CANADA . MULTI-INDUSTRY
*Consult the instructions and Material Safety Data Sheets carefully before use.
**FROTH-PAK™ Foam Insulation is available in the United States only.
213518_jun15_R1.indd 1213518_jun15_R1.indd 1 6/15/12 2:39 PM6/15/12 2:39 PM
Form No. 179-04541X-0612TCI
178-00514-0612TCI
NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether
products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other government enactments. The product
shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries or regions. Dow assumes no obligation or liability for the
information in this document. References to “Dow” or the “Company” mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO EXPRESS WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE
WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY DOW. ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
Dow Polyurethane Foam Insulation and Sealants
CAUTION: When cured, these products are combustible and will burn if exposed to open fl ame or sparks from high-energy sources. Do not expose to temperatures above 240ºF (116ºC). For more information, consult MSDS, call Dow
at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400 in the U.S. or 1-519-339-3711 in Canada.
FROTH-PAK™ spray polyurethane foam contains isocyanate, hydrofl uorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves,
goggles or safety glasses, and proper respiratory protection. Do not breathe vapor or mist. Use only with adequate ventilation. It is recommended that applicators and those working in the spray area wear respiratory protection. Increased
ventilation signifi cantly reduces the potential for isocyanate exposure; however, supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a particulate fi lter may still be required to maintain exposure levels
below ACGIH, OSHA, WEEL or other applicable limits. For situations where the atmospheric levels may exceed the level for which an air-purifying respirator is effective, use a positive-pressure, air-supplying respirator (air line or self-contained
breathing apparatus). Spraying large amounts of foam indoors may require the use of a positive-pressure, air-supplying respirator. Contents under pressure.
Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not develop in any specifi c system.
®™Trademark of The Dow Chemical Company (“Dow”) or an affi liated company of Dow
Printed in U.S.A.
THE DOW CHEMICAL COMPANY . Dow Building Solutions . 200 Larkin . Midland, MI 48674
DOW CHEMICAL CANADA ULC . Dow Building Solutions . Suite 2100 . 450 – 1st St., SW . Calgary, AB T2P 5H1
For Technical Information: 1-866-583-BLUE (2583) (English) . 1-800-363-6210 (French)
For Sales Information: 1-800-232-2436 (English) . 1-800-565-1255 (French)
www.sprayfoamatdow.com
Scan this QR code
to learn more about
the safe handling
of FROTH-PAK™
products.
Coverage
Nozzle Type Output Area Description
Caulking Low Controlled • Designed for precisely
bead size controlled output
Use for tight areas
Minimizes overspray
and waste
NS Cone/ Medium Small Cylindrical spray pattern
Spray Fills voids and cavities
Fan/ Medium Wide Designed for flat applications –
Spray area walls, roofs and ceilings
Use to smooth out orange
peel finish
Pour High Large • Designed for filling large
volume cavities (slow rise formulation
recommended)
Use in hidden cavity
applications
Note: Other nozzles with varyin
g
outputs and spray patterns are available.
Spray Accuracy in Action
The lightweight INSTA-FLO
Dispensing Spray Gun is sturdy, reusable
and features a comfort-designed grip.
With the INSTA-FLO
gun, fl ow rates can
be easily controlled and output precisely
metered to reduce overspray and waste.
Dow offers the widest selection of
nozzle types available in the industry
today.
Metal carrying
handles and banding
around cylinders help
increase portability.
Temperature indicator
helps applicator optimize
product performance.
FROTH-PAK
Kits
McKAY213518
213518_jun15_R1.indd 2213518_jun15_R1.indd 2 6/15/12 2:39 PM6/15/12 2:39 PM
  • Page 1 1
  • Page 2 2

Dow 99036922 User guide

Type
User guide
This manual is also suitable for

The Dow 99036922 is a versatile polyurethane foam system designed for a wide range of sealing, insulating, and structural applications. This two-component system combines a resin and an isocyanate to create a rigid, closed-cell foam that expands to fill cavities, cracks, and gaps. It offers excellent adhesion to a variety of substrates, including metal, wood, concrete, and masonry. The foam is self-extinguishing and has a high R-value, making it an effective insulator. It is also water-resistant and can be used in both indoor and outdoor applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI