none 133599 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the none 133599 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
US patent # 6,644,627
MADE IN CHINA
Distributed by Universal Forest Products
Grand Rapids, MI 49525
DECK
DECK
WRECKERWRECKER
WRECKER
WRECKER
REMOVE
DECK BOARDS
FAST
Lightweight fiberglass handle
Designed to work on single and
double joists
Rotating head allows for use in
two directions
O O O
uSEFul
INFO
POSITION 2
POSITION 1
With tool in
Position #2, start
on outside of deck
and work toward
structure removing
all boards as close
to structure as
possible.
Remove outside
board first to allow
access for tool to
straddle joist.
Rotate head to
Position #1. While
standing on a safe
platform over the
exposed joists,
remove remaining
boards.
2
3
1
NOTE: Insert tool head fully under
board for maximum lifting leverage.
To rotate the tool head, simply pull pin,
rotate head 180° and reinsert pin.
These diagrams and instructions are for illustration purposes only and are not meant to replace a licensed professional. Any construction or use of the product must be in accordance with all local
zoning and/or building codes. The consumer assumes all risks and liability associated with the construction or use of this product. The consumer or contractor should take all necessary steps
to ensure the safety of everyone involved in the project, including, but not limited to, wearing the appropriate safety equipment. SELLER MAKES NO WARRANTY FOR THIS PRODUCT, EITHER
EXPRESS OR IMPLIED. SELLER EXPRESSLY DISCLAIMS ANY AND ALL LIABILITY FOR DAMAGES ARISING OUT OF THE USE OR OWNERSHIP OF THE PRODUCT, INCLUDING DISCLAIM-
ING INCIDENTAL AND CONSEQUENTIAL DAMAGES, UNLESS OTHERWISE REQUIRED BY STATE LAW. © 2011 Universal Forest Products, Inc. All rights reserved.
7071_9/12
/