McIntosh MP1100 Owner's manual

Brand: McIntosh

Model: MP1100

Type: Owner's manual

McIntosh MP1100 is a high-end phono preamplifier designed to enhance the sound quality of vinyl records. It offers both balanced and unbalanced inputs and outputs, allowing for flexible connectivity with various audio components. The MP1100 features a built-in analog-to-digital converter, enabling the user to easily convert their vinyl collection into digital formats for storage or playback on digital devices. It also includes a USB output with control signal for direct connection to a computer.

MP1100 Phono Preamplifier Connection Diagram

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04173000

Integrated Amplifier requiring Analog to Digital Conversation

Computer

Tur ntable 2

Tur ntable 1

Note: Refer to the MP1100 Owner’s Manual page 9 for additional connection information.

Connection Legend:

Data Cable*- Digital Signal Cable -

Sensor/Keypad Cable - RS232 Cable -

Power Control Cable* - Ground Wire -

Audio Signal Cable - AC Power Cords -

Video Signal Cable - Loudspeaker Cable -

RF Signal Cable -

* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.

Connect to

AC Outlet

Analog Preamplifier

Digital Preamplifier

Connection from

the Preamplifier

Power Control

(Trigger Out)

IR Sensor

MP1100 Rear Panel Connections

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

Connect the MP1100 power

cord to a live AC outlet. Refer

to information on the back

panel of your MP1100 to

determine the correct voltage

for your unit

GROUND terminals

accept a ground wire

from a turntable

RIGHT PHONO INPUT 3

BALanced Input accepts

signals from Moving Mag-

net or Moving Coil Phono

Cartridges

RIGHT OUTPUT

BALanced sends sig-

nals to a Preamplifier

or a recording device

COAXial DIGITAL OUT-

PUT for components with a

Digital Coaxial Input receiv-

ing a digital audio signal

OPTICAL DIGITAL AUDIO

OUTPUT for components with a

Digital Optical Input receiving a

digital audio signal

USB DIGITAL OUTPUT

with control signal for con-

nection to a computer

IR INput for

signals from a

compatible IR

Room Sensor

POWER CONTROL

TRIGger IN receives turn-on signals

from a McIntosh component.

TRIGger OUT sends turn-on signals

on to another McIntosh Component

RIGHT OUTPUT un-

balanced sends signals

to a Preamplifier or a

recording device

LEFT OUTPUT BAL-

anced sends signals

to a Preamplifier or a

recording device

LEFT OUTPUT unbalanced

sends signals to a Preampli-

fier or a recording device

RIGHT LINE INPUT 2

balanced input receives

analog signals for listen-

ing to and/or converting

into a digital signal

RIGHT LINE INPUT 1

unbalanced input receives

analog signals for listen-

ing to and/or converting

into a digital signal

LEFT LINE INPUT 2

balanced input receives

analog signals for listen-

ing to and/or converting

into a digital signal

LEFT LINE INPUT

1 unbalanced input

receives analog signals

for listening to and/or

converting into a digital

signal

RIGHT PHONO INPUTS

1 thru 3 Unbalanced Inputs

accept signals from a

Moving Magnet or Moving

Coil Phono Cartridge

LEFT PHONO INPUT 3

BALanced Input accepts

signals from Moving

Magnet or Moving Coil

Phono Cartridges

LEFT PHONO INPUTS

1 thru 3 Unbalanced Inputs

accept signals from a

Moving Magnet or Moving

Coil Phono Cartridge

McIntosh MP1100 Owner's manual

McIntosh MP1100 Owner's manual

McIntosh MP1100 Owner's manual

Related papers