Bauknecht ADG 50205 Installation guide

Contents

1

1. Safety and operating instructions _________ 2

2. Installation and hook-up _______________ 14

You are advised to read this manual carefully; it

contains all the information you

need about the

right conditions for the proper, safe use of your

dishwasher.

INSTALLATION INSTRUCTIONS: these are

intended for the qualified technician

who must

carry out the installation, hook-

up and testing of

the appliance.

User instructions

2

1. Safety and operating instructions

THIS MANUAL FORMS AN INTEGRAL PART

OF THE APPLIANCE;

IT MUST ALWAYS BE

KEPT INTACT TOGETHER WITH THE

DISHWASHER FOR FUTURE REFERENCE.

BEFORE USING THE APPLIANCE,

CAREFULLY READ ALL THE INSTRUCTIONS

CONTAINED IN THIS MANUAL.

THEY

CONTAIN IMPORTANT INFORMATION FOR

THE INSTALLATION, USE AND

MAINTENANCE OF THE APPLIANCE. IN THE

EVENT OF SALE OR TRANSFER, ENSURE

THAT THE MANUAL ALW

AYS ACCOMPANIES

THE APPLIANCE.

THIS APPLIANCE IS INTENDED FOR

INDOOR

USE IN A HOUSEHOLD ENVIRONMENT

AND

SIMILAR SUCH AS STAFF KITCHENS OF

SHOPS, OFFICES AND OTHER

WORKPLACES, INSTITUTIONS, AND FOR

THE USE BY

GUESTS AT HOTELS,

HOSTELS, BED AND BREAKFAST AND

OTHER RESIDENTIAL FACILITIES.

THIS APPLIANCE IS DESIGNED TO BE USED

ONLY IN STATIONARY LOCATIONS.

User instructions

3

THIS APPLIANCE

COMPLIES WITH

DIRECTIVES 2006/95/EC AND 2004/108/EC

CURRENTLY IN FORCE, INCLUDING THE

PREVENTION AND ELIMINATION OF RADIO

FREQUENCY INTERFERENCE AND

IS

DESIGNED FOR THE FOLLOWING PURPOSE:

WASHING AND DRYING OF DISHES;

ANY

OTHER USE SHALL BE C

ONSIDERED

IMPROPER.

THE MANUFACTURER

DECLINES ALL RESPONSIBILITY F

OR USES

OTHER THAN THOSE DESCRIBED ABOVE.

DO NOT USE APPLIANCES WHICH HAVE

BEEN DAMAGED DURING TRANSIT!

IF IN

DOUBT, CONSULT YOUR DEALER.

THE APPLIANCE MUST B

E INSTALLED AND

CONNECTED IN ACCORDA

NCE WITH THE

INSTRUCTIONS PROVIDE

D BY THE

MANUFACTURER.

INSTALLATION MUST BE

PERFORMED BY A QUALIFIED TECHNICIAN,

IN COMPLIANCE WITH THE REGULATIONS

IN FORCE.

DO NOT LEAVE THE DIS

CARDED

PACKAGING MATERIALS UNSUPERVIS

ED

WITHIN THE HOME.

DO NOT ALLOW

CHILDREN TO PLAY WIT

H PACKAGING

MATERIALS. SEPARATE THE VARIOUS

MATERIALS WHICH MAKE

UP THE

PACKAGING AND TAKE T

HEM TO THE

NEAREST SORTED WASTE

COLLECTION

CENTRE.

User instructions

4

THE NAME PLATE FEATU

RING THE

TECHNICAL DATA, SERI

AL NUMBER AND

MARKINGS IS VISIBLY

POSITIONED ON THE

INNER EDGE OF THE DOOR.

THE NAME

PLATE MUST NEVER BE REMOVED.

THE APPLIANCE MUST B

E PROVIDED WITH

AN EARTH CONNECTION

IN ACCORDANCE

WITH THE ELECTRICAL

SAFETY

REGULATIONS IN FORCE.

THE MANUFACTURER DEC

LINES ALL

RESPONSIBILITY FOR D

AMAGE TO

PERSONS OR PROPERTY

RESULTING

FROM THE FAILURE TO

EARTH THE

APPLIANCE OR FROM A

DEFECTIVE EARTH

CONNECTION.

DURING THE INSTALLATIO

N THE

APPLIANCE MUST BE D

ISCONNECTED

FROM THE NETWORK.

DO NOT INSTALL THE A

PPLIANCE IN A

PLACE SUBJECT TO FREEZING.

IF THE APPLIANCE IS

INSTALLED ON A

CARPETED OR COVERED

FLOOR, ENSURE

THAT THE OPENINGS ON

ITS UNDERSIDE

ARE NOT OBSTRUCTED.

DO NOT INSTALL THE APPL

IANCE NEAR

EQUIPMENT WITH HIGH

IRRADIATION

TEMPERATURES (EG. GAS BURNERS

,

FIREPLACES, ETC.) AS

THEY MAY CAUSE

DAMAGE.

User instructions

5

IF THE APPLIANCE IS

INSTALLED IN A

COMPARTMENT ABOVE OR

BELOW

ANOTHER EQUIPMENT (E

G. GAS BURNERS,

OVENS, ETC.), READ C

AREFULLY THE

INSTRUCTIONS PROVIDE

D BY THE

MANUFACTURER OF THE

EQUIPMENT. IF

THE INSTRUCTIONS OF

THE EQUIPMENT

DO NOT CONTAIN INFORMATION,

CONTACT

THE MANUFACTURER OF

THE EQUIPMENT

TO ENSURE THAT THE A

PPLIANCE CAN BE

INSTALLED ABOVE OR BELOW IT.

BUILDING-IN THE APPLIANCE UNDERN

EATH

A HOB IS ABSOLUTELY FORBIDDEN.

INSTALL A HOB ON TOP OF A FREE-

STANDING APPLIANCE I

S ABSOLUTELY

FORBIDDEN.

TO ENSURE STABILITY,

INSTALL THE

APPLIANCE ONLY UNDER

CONTINUOUS

WORKTOP, SECURELY FIXED TO AD

JACENT

CABINETS. IF THE APP

LIANCE IS INSTALLED

IN A HIGH CABINET BOTH, THE

APPLIANCE

AND THE CABINET,

MUST BE ADEQUATELY

FIXED.

User instructions

6

IF THE APPLIANCE IS PLACED AT THE END

OF A ROW OF KITCHEN

CABINETS (THERE

IS NO FULL END CABIN

ET), THE DOOR

HINGE AREA MAY BE EX

POSED.TO COVER

UP THIS AREA, THUS A

VOIDING ANY RISK

OF ITEMS BEING PINCH

ED IN THE EXPOSED

DOOR HINGE, YOU ARE

OBLIGATED TO

ATTACH THE HINGE-PROTE

CTION PANELS

THAT ARE SUPPLIED WI

TH THE APPLIANCE

TO THE SIDE PANELS O

F THE APPLIANCE.

THERE IS A LEFT-HAND VERSION FOR THE

LEFT-HAND SIDE OF THE APP

LIANCE AND A

RIGHT-HAND VERSION FOR THE RIGHT-

HAND SIDE OF THE APP

LIANCE. INSTALL

THE PANELS AS SHOWN IN TH

E DRAWING

ATTACHED TO THE KIT,

USING THE

SCREWS PROVIDED WITH THE PANELS.

CHECK THAT THE VOLTA

GE AND THE

FREQUENCY OF THE MAI

NS MATCH THE

RATINGS ON THE NAME

PLATE OF THE

APPLIANCE.

THE PLUG ON THE SUPP

LY CORD AND THE

CORRESPONDING SOCKET

OUTLET MUST

BE OF THE SAME TYPE

AND MEET THE

REGULATION IN FORCE.

DO NOT USE ADAPTORS

OR SHUNT

CONNECTIONS IN ORDER

TO AVOID THE

POSSIBILITY OF OVERH

EATING OR

BURNING.

User instructions

7

THE PLUG OF THE APPL

IANCE MUST BE

ACCESSIBLE AFTER INSTALLATION.

NEVER DISCONNECT THE

PLUG BY

PULLING ON THE POWER CORD.

IF THE APPLIANCE IS

PROVIDED WITH A

PLUGLESS SUPPLY CORD

, A CIRCUIT

BREAKER

PROVIDING A FULL

DISCONNECTION

IN OVERVOLTAGE

PROTECTION CLASS III

MUST BE

INSTALLED IN AN EASI

LY ACCESSIBLE

POSITION ON THE SUPPLY LINE.

THE APPLIANCE MUST B

E CONNECTED TO

THE WATER SUPPLY BY

NEW HOSES; OLD

HOSES MUST NEVER BE REUSED.

IMMEDIATELY AFTER INSTALLING THE

DISHWASHER, PERFORM A QUICK TEST OF

THE APPLIANCE.

IF THE DISHWASHER

FAILS TO OPERATE CORRECTLY,

DISCONNECT IT FROM THE ELECTRICAL

POWER SUPPLY AND CALL THE NEAREST

TECHNICAL SERVICE CENTRE.

DO NOT

ATTEMPT TO REPAIR THE APPLIANCE.

User instructions

8

THIS APPLIANCE CAN BE USE

D BY

CHILDREN AGED FROM 8

YEARS AND

ABOVE AND PERSONS WI

TH REDUCED

PHYSICAL, SENSORY OR

MENTAL

CAPABILITIES OR LACK

OF EXPERIENCE

AND KNOWLEDGE IF THE

Y HAVE BEEN

GIVEN SUPERVISION OR

INSTRUCTION

CONCERNING USE OF TH

E APPLIANCE IN A

SAFE WAY AND UNDERSTAND T

HE

HAZARDS INVOLVED. CHILDREN SHALL

NOT PLAY WITH THE AP

PLIANCE. CLEANING

AND USER MAINTENANCE

SHALL NOT BE

MADE BY CHILDREN WIT

HOUT

SUPERVISION.

DO NOT ALLOW CHILDREN TO PLAY WITH

THE APPLIANCE.

SOME DETERGENTS ARE STRONGLY

ALKALINE. AVOID CONTACT WITH THE SKIN

AND EYES.

DETERGENTS CAN BE

EXTREMELY DANGEROUS IF SWALLOWED.

THEY CONTAIN SUBSTANCES CAPABLE OF

CAUSING PERMANENT DAMAGE TO THE

MOUTH AND THROAT, AND EVEN LEADING

TO SUFFOCATION. OBSERVE ALL

THE

SAFETY INSTRUCTIONS ON THE

PACKAGING OF THESE PRODUCTS.

User instructions

9

KEEP CHILDREN AWAY FROM THE

DISHWASHER WHEN THE DOOR IS OPEN.

ALWAYS CHECK THAT THE DETERGENT

RECEPTACLE IS EMPTY AFTER

COMPLETION OF THE WASH CYCLE.

DO NOT DRINK THE WAT

ER RESIDUES

WHICH MAY BE PRESENT

INSIDE THE

DISHES OR APPLIANCE

AT THE END OF THE

WASHING PROGRAM.

DO NOT INTRODUCE SOL

VENTS SUCH AS

ALCOHOL OR TURPENTINE

IN THE

APPLIANCE, AS THIS

MAY CAUSE AN

EXPLOSION.

DO NOT LOAD DISHES THAT ARE

SOILED

WITH ASH, WAX OR PAINT.

NEVER LEAVE THE DISH

WASHER DOOR

OPEN; PEOPLE MIGHT TRIP OVER IT.

LEANING OR SITTING O

N THE DISHWASHER

DOOR WHEN OPEN MAY C

AUSE THE

APPLIANCE TO OVERTURN.

KNIVES OR OTHER SHARP-

ENDED

COOKING TOOLS MUST BE PLACED IN TH

E

CUTLERY BASKET BLADE-

DOWN, OR LAID

HORIZONTAL IN THE TOP BASKET.

TAKE

CARE NOT TO CUT YOUR

SELF AND

ENSURE THAT THEY DO

NOT PROJECT

FROM THE BASKET.

User instructions

10

THE DISHWASHER MEETS

ALL THE

REQUIREMENTS SET OUT

BY THE

REGULATIONS IN FORCE

CONCERNING

SAFETY AND ELECTRICAL EQUIPMENT.

ANY

TECHNICAL CHECKS SHO

ULD BE

CONDUCTED EXCLUSIVEL

Y BY TRAINED

AND AUTHORISED TECHNICIANS:

REPAIRS

CARRIED OUT BY UNAUT

HORISED

PERSONS WILL INVALID

ATE THE

WARRANTY, AS WELL AS

POSING A

POTENTIAL HAZARD TO THE USER.

IN THE EVENT OF A FA

ULT, DISCONNECT

THE DISHWASHER FROM

THE ELECTRICAL

POWER SUPPLY AND SHU

T OFF THE

WATER TAP.

IN THE EVENT OF DAMA

GE TO THE SUPPLY

CORD, HAVE IT REPLACED

BY THE

MANUFACTURER OR AN A

UTHORIZED

TECHNICAL SERVICE CENTRE.

SOME COMPONENTS ARE LIVE

EVEN WITH

THE ON/OFF BUTTON IN

THE OFF POSITION.

BEFORE MAINTENANCE W

ORK ON THE

APPLIANCE, DISCONNEC

T THE PLUG OR

TURN OFF THE MAINS S

WITCH IN THE

FIXED WIRING.

User instructions

11

C

LEANING AND REGULAR MAINTENANCE

OF THE APPLIANCE BY CHILDREN IS

ONLY

PERMITTED UNDER THE SUPERVISION OF A

PERSON RESPONSIBLE FOR THEIR

SAFETY.

DO NOT USE STEAM CLE

ANERS TO CLEAN

THE DISHWASHER.

MODELS WITH “AQUASTOP” DEVICE

THE “AQUASTOP” DEVICE

PREVENTS

FLOODING IN THE EVENT OF A WATER

LEAK.

WHEN THE “AQUASTOP” DEVICE IS

TRIPPED, CALL IN A QUALIFIED TECHNICIAN

TO IDENTIFY AND REPAIR THE FAULT.

INSIDE THE “AQUASTOP

” WATER INTAKE

HOSE, THERE ARE ELECTRICAL PARTS.

DO

NOT CUT THE HOSE AND DO NOT ALL

OW

THE “AQUASTOP” DEVICE

TO DROP INTO

WATER. IN THE EVENT OF DAMA

GE TO

THE “AQUASTOP” WATER

INTAKE HOSE,

DISCONNECT THE APPLI

ANCE FROM THE

ELECTRICAL SUPPLY AN

D FROM THE

WATER SUPPLY.

MODELS WITH INTERNAL LIGHTING

THE LIGHTING SYSTEM

OF THE APPLIANCE

BELONGS TO RISK GROU

P 1 UNDER THE

IEC/EN 62471 STANDAR

D. THIS MEANS

THAT THERE IS NO PHO

TOBIOLOGICAL

RISK IN NORMAL CONDITIONS OF USE.

User instructions

12

IN ACCORDANCE TO ART

. 26 OF THE

LEGISLATIVE DECREE 1

4 MARCH 2014, NR.

49 “IMPLEMENTATION O

F THE DIRECTIVE

2012/19/EU ON WASTE OF ELECTRIC

AL

AND ELECTRONIC EQUIPMENT (WEEE)”.

THE SYMBOL OF A CROS

SED OUT WHEELIE

BIN ON THE DEVICE OR PAC

KAGE

SHOWS THAT THE PRODU

CT MUST BE

COLLECTED SEPARATE F

ROM OTHER

WASTE, AT THE END OF ITS SERVICE LIFE.

THEREFORE, THE USER HAS TO TAKE

ANY

EQUIPMENT THAT HAS R

EACHED THE END

OF ITS SERVICE LIFE

TO LOCAL WASTE

DISPOSAL CENTRES FOR

ELECTRICAL AND

ELECTRONIC EQUIPMENT WASTE.

AS AN ALTERNATIVE TO

THE IDEPENDENT

MANAGEMENT, IT IS PO

SSIBLE TO DELIVER

THE EQUIPMENT WHICH

HAS TO BE

DISPOSED OF TO

THE DEALER, AT THE

MOMENT OF PURCHASING

A NEW

EQUIVALENT DEVICE AT

THE ELECTRONIC

EQUIPMENT DEALERS WITH A

SALES AREA

OF AT LEAST OF 400 M

2

. ALSO, FOR

DISUSED DEVICES WITH

DIMENSIONS

INFERIOR TO 25 CM, F

REE DELIVERY TO

THE DEALERS IS POSSI

BLE, WITH NO

PURCHASE OBLIGATION

A PROPER SEPARATE WA

STE COLLECTION

AND THE CONSEQUENT H

EADING OF THE

DISUSED DEVICE TOWAR

DS ITS

RECYCLING, TREATMENT

AND

User instructions

13

ENVIRONMENTALLY COMP

ATIBLE

DISPOSAL, CONTRIBUTE

S IN PREVENTING

ANY POSSIBLE NEGATIV

E EFFECTS ON

ENVIRONMENT AND HEA

LTH; ALSO, IT

SUPPORTS THE REUSE A

ND/OR RECYCLE

OF THE MATERIALS WHI

CH COMPOSED THE

DEVICE.

OBSOLETE APPLIANCES

MUST BE

RENDERED UNUSABLE.

CUT OFF THE

MAINS POWER CORD AFT

ER UNPLUGGING

IT FROM THE WALL OU

TLET, AND MAKE

SAFE ANY COMPONENTS WHICH MIGHT

BE

DANGEROUS FOR CHILDR

EN (LOCKS,

DOORS, CABLES, HOSES, ETC.).

The manufacturer declines all responsibility for

damage to persons or property resulting from

failure to observe the above precautions, from

tampering with even a single component of the

appliance, or from the use of non original spare

parts.

User instructions

14

2. Installation and hook-up

0

Usage of gloves during installation

Remove the polystyrene basket retainers.

Position the appliance in the desired place of

installation. The back

or sides of the dishwasher

may be placed up against walls or other furniture

units.

If the dishwasher is installed near a heat

source, fit the special insulating panel to prevent

overheating and malfunction of the appliance.

To ensure stability, install integrated or built-

under dishwashers only under continuous

worktops, and screw them to the adjacent units.

To facilitate the installation procedure, the intake

and drain hoses can be positioned in any

direction; make sure that the hoses are not

kinked, crushed or pulled too tightly.

Make sure

to tighten the locking ring-

nut once the pipes

have been placed in the direction required.

A

hole at least 8 cm in diameter is required to allow

the power supply cable and pipes to pass.

Before

putting the dishwasher in

to its definitive position,

turn on the water tap and check that there are

no leaks from the tap connection, the

dishwasher connection or the hose.

Level the appliance on the floor using its

adjustable feet.

This operation is essential for

ensuring correct operation of the dishwasher.

User instructions

15

Some models are equipped with only one

adjustable foot at the rear, which can be

adjusted by turning the screw on the lower front

part of the appliance.

Building-

in a dishwasher underneath a hob is

absolutely forbidden.

0

Moreover, dishwashers may not be installed

directly touching appliances which are not

conventional built-

in kitchen appliances (e.g.

fireplaces, stoves, etc.).

0

When installing the dishwasher in a compartment

next to one or more

other appliances, it is

essential to comply with all the recommendations

provided by the appliance’s manufacturer

(minimum distances, installation procedures,

etc.).

For free-standing models only:

- Installing a hob on top of a free-

standing

dishwasher is absolutely forbidden.

- If the appliance is not built-

in and is therefore

accessible on one side, the door hinge area

must be covered for safety

reasons (injury hazard). The covering fixtures are

a

vailable as an accessory from specialist

dealers or the After-Sales

Service.

- To build in the dishwasher, the special kit

must

be purchased from authorised dealers or the

After-Sales Service.

User instructions

16

Long door models only:

If the appliance is placed at

the end of a row of

kitchen cabinets (there is no full end cabinet),

the door hinge area may be exposed. To cover

up this area, thus avoiding any risk of items

being pinched in the exposed door hinge, you

are obligated to attach the hinge-

protection

panel

s that are supplied with the appliance to

the side panels of the appliance. There is a left-

hand version for the left-

hand side of the

appliance and a right-hand version for the right-

hand side of the appliance. Install the panels

shown in the drawing atta

ched to the kit, using

the screws provided with the panels.

2.1 Water supply connection

Preventing the risk of clogging or damage:

if

the water pipe is new or has not been used for a

long time, before connecting to the water supply

check that the water

is clear and free of

impurities, to prevent damage to the appliance.

The dishwasher must always be connected

to the water system with new hoses; old or

used hoses must never be reused.

User instructions

17

CONNECTING TO THE WATER

SUPPLY

Connect the intake hose to a cold

water supply with ¾” gas thread,

inserting the filter A

supplied with the

dishwasher.

Take care to screw the

hose firmly into place with your

hands and then complete by

tightening about ¼ of a turn with

pliers.

In

dishwashers equipped with the

ACQUASTOP device, the filters is

already fitted inside the threaded

ring.

The dishwasher can also be connected to a hot

water supply not exceeding 60°C

. Supplying the

appliance with hot water cuts down the washing

time by approximately 20 minutes, but slightly

reduces its effectiveness.

Make the connection to

the domestic hot water supply using the same

procedure described for connecting to the cold

water supply.

User instructions

18

DRAIN CONNECTION

Insert the dishwasher’s drain

hose into a drain pipe having a

diameter of at least 4 cm

, or

alternatively, place it inside the

kitchen sink using the plastic

support provided, taking care

not to crush or excessively bend

the hose.

It is important to

preven

t the hose from coming

loose and falling.

For this

purpose, the plastic support is

equipped with a hole for tying it

to the wall or water tap.

The free end should be positioned at a height of

between 30 and 100 cm,

and should never be

submerged in water.

If a horizontal drain

extension hose is used (for a maximum of 3 m)

the drain hose can be placed at a maximum

height of 85 cm from the ground.

Class of protection against moisture: IPX0

APPLIANCE CAN NOT BE OPERATED UNTIL

INSTALLATION PROCESS IS COMPLETE.

User instructions

19

2.2 Electrical connection and precautions

CHECK THAT THE VOLTA

GE AND THE

FREQUENCY OF THE MAI

NS MATCH THE

RATINGS ON THE NAME

PLATE OF THE

APPLIANCE POSITIONED

ON THE INNER

EDGE OF THE DOOR.

THE PLUG ON THE SUPP

LY CORD AND THE

CORRESPONDING SOCKET

OUTLET MUST

BE OF THE SAME TYPE

AND MEET THE

REGULATIONS IN FORCE.

THE PLUG MUST BE ACC

ESSIBLE AFTER

INSTALLATION.

NEVER DISCONNECT THE

PLUG BY

PULLING ON THE POWER SUPPLY LEAD.

AFTER CHANGING THE SUPPLY

CORD,

MAKE SURE THAT THE BRACKET

WHICH

SECURES THE CORD IS

FIXED SECURELY

IN PLACE.

DO NOT USE ADAPTORS

, CONVERSION

PLUGS OR SHUNT CONNECTIONS

IN

ORDER TO AVOID THE P

OSSIBILITY OF

OVERHEATING OR BURNING.

EXTENSION

CORD IS NOT ALLOWED.

In the event of damage to the supply

cord,

have it replaced by the manufacturer or an

Authorized Technical Service Centre in order

to avoid any risk.

User instructions

20

Some components are live even with the

ON/OFF button in the OFF position. Before

maintenance work on the appliance, remove

the plug or

turn off the power supply at the

wall switch.

IF THE APPLIANCE IS PROVIDED WITH A

PLUGLESS SUPPLY CORD:

AN OMNIPOLAR CIRCUIT

BREAKER IN

OVERVOLTAGE PROTECTION CLASS III

MUST BE INSTALLED IN

AN EASILY

ACCESSIBLE POSITION

ON THE POWER

SUPPLY LINE.

THE CONNECTION TO TH

E MAINS MUST BE

CARRIED OUT BY A QUALIFIED TECHNICIAN

IN ACCORDANCE TO THE

SCHEME SHOWN

BELOW AND THE REGULATIONS IN FORCE.

L = brown

N = blue

= yellow-green

Class of protection against electric shock: I

Page is loading ...

Bauknecht ADG 50205 Installation guide

This manual is also suitable for

Bauknecht ADG 50205 Installation guide

Other documents