Panasonic TH42PV8EYA Operating instructions

Category
Plasma TVs
Type
Operating instructions
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Operating Instructions
Plasma Television
Model No. TH-42PV8EYA
2
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
3
Viewing Advanced FAQs, etc.
Quick Start Guide
media excitement
Enjoy rich multi-media
Camcorder
Ampli er with
Speaker system
VCR
DVD player
DVD Recorder
Set top box
Up to 100,000 hours Plasma Panel Lifetime
The Plasma display panel used in the 2008 VIERA TV
range is rated for up to 100,000 hours.
This measurement is based on the time taken for the brightness of
the panel to reduce to half of it’s maximum level.
The time taken to reach this level may vary depending on the
image content and the environment where the TV is used.
Image retention and malfunctions are not taken into account.
Contents
Be Sure to Read
Safety Precautions ······································ 4
(Warning / Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Quick Start Guide
Accessories / Options ········· 6
Identifying Controls ·············· 8
Basic Connection ················ 10
Auto Setup ······························ 12
Enjoy your TV!
Basic Features
Watching TV ·············································· 14
Viewing Teletext ········································ 16
Watching Videos and DVDs ······················ 18
Advanced Features
How to Use Menu Functions ····················· 20
(picture, sound quality, etc.)
Editing Programmes ································· 24
Tuning Programmes ·································· 26
Control Programme Audience ·················· 28
Restore Settings ······································ 29
Input Labels ·············································· 30
Link Functions ·········································· 32
(Q-Link / VIERA Link)
External Equipment ··································· 38
FAQs, etc.
Technical Information ································ 40
FAQs ························································· 42
Speci cations ············································ 43
Licence ······················································ 44
4
Safety Precautions
Warning & Caution
Do not expose to direct
sunlight and other sources
of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent re never place any
type of candle or naked ame on top or near the
TV.
Handling the mains plug and
lead
Ensure that the mains plug is easily accessible at
all times. The On / Off switch on this model does
not fully disconnect the TV from the mains supply.
Remove the mains plug from the wall socket when
the TV is not used for a prolonged period of time.
Ensure the earth pin on the mains plug is securely
connected to prevent electrical shock.
An apparatus with CLASS I construction shall
be connected to a mains socket outlet with a
protective earthing connection.
Do not use any mains lead other than that
provided with this TV. (This may cause re or
electrical shock.)
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
Power source
This TV is designed to operate on 220-240 V,
50 / 60 Hz AC.
Do not remove the cover
Do not remove the rear cover as live parts are accessible
when it is removed. There are no user serviceable parts
inside.
Do not expose your ears to
excessive volume from the
headphones
Irreversible damage can be caused.
Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
AC 220-240 V
50 / 60 Hz
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is tted in this
mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is re tted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one supplied with this TV.
The supplied mains lead and moulded plug are designed to be used with this TV to avoid interference
and for your safety.
If the socket outlet in your home is not suitable, get it changed by a quali ed electrician.
If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.
WARNING: – THIS TV MUST BE EARTHED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
5
Use only the dedicated
pedestals / mounting
equipment
Using an unapproved pedestal or other
xtures may make the TV unstable,
risking injury. Be sure to ask your local
Panasonic dealer to perform setup.
Use approved pedestals / mounts
(p. 6).
Notes
Auto power standby function
If no signal is received and no operation is performed in TV
mode for 30 minutes, the TV will automatically go to standby
mode.
Keep the TV away from these types of equipment
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect operation of
other equipment).
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image
retention”).
This is not considered a malfunction and is not covered by the
warranty.
Typical still images
Programme number and other logos
Image displayed in 4:3 mode
Video game
To prevent image retention, contrast is lowered automatically
after a few minutes if no signals are sent or no operations are
performed. (p. 42)
Allow suf cient space
around the TV for
radiated heat
Minimum distance
10
10
10 7
(cm)
When using the pedestal, keep the
space between the bottom of the TV
and the oor surface.
In case of using Wall-hanging bracket,
follow the manual of it.
Maintenance
Do not expose to rain or
excessive moisture
To prevent damage which might result
in electric shock or re, do not expose
this TV to rain or excessive moisture.
This TV must not be exposed to
dripping or splashing water and objects
lled with liquid, such as vases, must
not be placed on top of or above the TV.
Do not block the rear
ventilation openings
Ventilation should not be impeded by
covering the ventilation openings with
items such as newspapers, tablecloths
and curtains.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture
and dust may lead to re or electrical shock.)
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth
dampened with clean water or diluted neutral detergent (1 part
detergent to 100 parts water). Then, using a soft dry cloth, evenly
wipe the surface clean until it is dry.
Caution
The surface of the display panel has been specially treated and
may be easily damaged.
Do not tap or scratch the surface with your ngernail or other hard
object.
Take care not to subject the surface to insect repellent, solvent,
thinner, or other volatile substances
(this may degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water
containing a small amount of neutral detergent. Then, wring the cloth
and wipe the surface clean with it. Finally, wipe the surface clean with
a dry cloth.
Caution
Take care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
Take care not to subject surfaces to insect repellent, solvent,
thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet and pedestal to make contact with a
rubber or PVC substance for a long time.
6
TV
OK
132
465
798
0
+
-
-
+
Accessories / Options
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, re or the like.
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the pedestal, and be absolutely sure to take steps to prevent
the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product
damage.
Optional accessories
Wall-hanging bracket
(vertical)
TY-WK42PV3W
TY-WK42PV4W
(angle)
TY-WK42PR3W
TY-WK42PR4W
Batteries for the
Remote Control (2)
R6 (UM3)
Remote Control
N2QAYB000223
Standard accessories
Check that you have the accessories and items shown
Clamper
p. 8
Mains Lead
p. 11
Pedestal
p. 7
Operating Instructions
Pan European Guarantee Card
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
1
Pull open
Hook
2
Note the correct
polarity (+ or -)
Close
Installing / removing remote’s batteries
7
Quick Start Guide
A
R
D
L
D
B
Securing the TV
Use the assembly screws to fasten securely.
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
View from the bottom
Assembling the pedestal
Use the four assembly screws to fasten the left and
right poles to the base securely.
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will
strip the threads.
“L” or “R” mark is stamped on the bottom of the pole.
Front
Arrow mark
Hole for pedestal installation
Accessories / Options
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insuf cient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
(silver)
XYN5+F18FN
Assembly screw (4)
(black)
THEL061N
Pole (2)
R : TBLA3626
L : TBLA3627
Base
TBLX0061
M5 × 18 M5 × 25
L
R
8
AV3
P
U
LL
Using the clamper
Do not bundle the RF cable and mains
lead together (could cause distorted
image).
Fix cables with clampers as necessary.
When using the optional accessory,
follow the option’s assembly manual to
x cables.
Rear of the TV
snaps
To loosen:
Keep
pushing both
side snaps
Set the
tip in the
hooks
Insert the clamper
in a hole
Attach the clamper Bundle the cables
Keep
pushing
the knob
knobhooks
To remove
from the TV:
hole
TV
Lift door to open
Increases or decreases the programme position by one. When a function is already displayed,
press to increase or decrease the selected function. When in Standby mode, switches TV On.
Changes the
input mode
Function select
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 27)
Headphones jack
(p. 38)
AV3 terminals
(p. 38)
Accessories / Options
Identifying Controls
Mains power
On / Off switch
Switch On to turn on the TV
or turn the TV to standby
mode by the remote control
Remote control signal receiver
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
9
Quick Start Guide
TV
PROGRAMME
ASPECT
INPUT
RETURN
EXIT
MENU
OK
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
VCR DVD
TEXT F.P. INDEX HOLD
Identifying Controls
Accessories / Options
Identifying Controls
Remote Control
Cursor buttons
Makes selections and adjustments
Standby On / Off switch
Switches TV On or Off standby
Sound Mute
Switches sound mute On or Off
Surround (p. 22)
Switches Surround On or Off
Programme Up / Down
Selects programme in sequence
Teletext (p. 16)
Switches to teletext mode
OK
Con rms selections and choices
Press after selecting programme positions to
quickly change programme
VCR / DVD Panasonic equipment
operations (p. 19)
Volume Up / Down
Programme Information (p. 15)
Displays programme information
Index (p. 17)
Returns to the teletext index page
(teletext mode)
Exit
Returns to the normal viewing screen
VIERA Link Menu (p. 35)
Press to access VIERA Link Menu directly
Aspect (p. 15)
Changes aspect ratio from Aspect Selection list
Also possible by pressing this button
repeatedly until you reach the desired aspect
Option Menu (p. 14)
Easy setting for viewing and sound
options
Main Menu (p. 20)
Press to access VIERA Link, Picture,
Sound and Setup Menus
Favourite Page (p. 17)
Calls up the teletext page stored in blue button
Input mode selection
TV - switches to TV mode (p. 18)
AV - switches to AV input mode from Input
Selection list (p. 18)
Direct TV Recording (p. 33 and p. 35)
Records programme immediately in
DVD Recorder / VCR with Q-Link or
VIERA Link connection
Hold
Freeze / unfreeze picture (p. 14)
Holds the current teletext page (teletext
mode) (p. 17)
Return
Returns to the previous menu
Numeric buttons
Changes programme and teletext pages
When in Standby mode, switches TV On
Coloured buttons
Used for the selection, navigation and
operation of various functions
10
RGB
VIDEO
S VIDEO
RGB
VIDEO
HDMI 1 HDMI 2
AV2AV1
COMPONENT
AUDIO
OUT
AUDIO
IN
Y
PB
P
R
L
R
L
R
RGB
VIDEO
S VIDEO
RGB
VIDEO
HDMI 1 HDMI 2
AV2AV1
COMPONENT
AUDIO
OUT
AUDIO
IN
Y
PB
P
R
L
R
L
R
RF OUT
RF IN
Basic Connection
Mains lead (supplied)
Mains lead (supplied)
SCART cable
(fully wired)
DVD Recorder or VCR
Aerial AerialRear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet rst.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
RF cable
TV only TV, DVD Recorder or VCR
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
Note
Connect to AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link (p. 33).
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable
(p. 38).
Q-Link connection p. 32
VIERA Link connection p. 32
Read the manual of the equipment too.
RF cable
RF cable
11
Quick Start Guide
RGB
VIDEO
S VIDEO
RGB
VIDEO
HDMI 1 HDMI 2
AV2AV1
COMPONENT
AUDIO
OUT
AUDIO
IN
Y
PB
P
R
L
R
L
R
RF OUT
RF IN
RF IN
RF OUT
RF IN
Basic Connection
Example 3
Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
DVD Recorder
or VCR
Fully wired HDMI
compliant cable
Aerial
Mains lead (supplied)
Rear of the TV
Set top box
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable
RF cable
To remove from the TV:
Push until both
side tabs click
Press both tabs
and pull on
mains connector
to release
tabs
Make sure that
the mains lead is
securely xed.
12
INPUT
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
PROGRAMME
REC
VCR DVD
TEXT F.P. INDEX HOLD
TV
RETURN
EXIT
MENU
OK
Auto Setup
This will take about 3 minutes.
EXIT
RETURN
CH 29
Channel Service Name
CH 33
Analogue: 2
Searching
Scan 2 99 21 41
Sending Preset Data
Please wait!
Remote control unavailable
0% 100%
Country
Portugal
Spain
Italy
France
Austria
Germany
Switzerland
Hungary
Czech
E.Eu
Ireland
Poland
Netherlands
Belgium
Finland
Norway
Sweden
Denmark
Greece
OSD Language
Nederlands
Português
Español
Italiano
Français
English
Deutsch
Latviešu
Slovenščina
Hrvatski
Lietuvių
eesti keel
Srpski
Românǎ
Български
Slovenčina
Magyar
čeština
Polski
Еλληνικά
Türkçe
Suomi
Norsk
Svenska
Dansk
Please select your viewing environment.
Home Shop
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
Auto Setup
Auto Setup is now complete and your TV is ready for viewing.
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
To edit programmes
“Editing Programmes” (p. 24)
4
Start Auto Setup
If Q-Link, VIERA Link or similar
technology (p. 32), compatible
recorder is connected, programme,
language, country / region settings
are automatically downloaded to
the recorder.
Auto Setup will start to search for
TV programmes and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
3
Select your country
2
Select the language
“Shop” and “Home” are equal
to “Dynamic” and “Normal”
respectively - “Viewing Mode” in
“Picture Menu” (p. 22)
5
Select the picture setting
Search and store TV programmes automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Depending on the selected
countries, you may also be
required to select the region.
select
select
store
select
set
13
Quick Start Guide
Select
EXIT
Change
RETURN
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Speaker Distance to Wall
Over 30cm
MPX Stereo
Sound Menu 1/2
Page up
Page down
Auto Setup
ON SCREEN HELP Instructions box
(example: Sound Menu)
Many features available on this TV can be accessed via the On Screen Display
menu.
How to use remote control
Using the
On Screen
Displays
MENU
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal viewing screen
Note
If tuning has failed “Auto Setup”
(
p. 27)
If downloading has failed “Download”
(
p. 23)
To initialize all settings “Shipping Condition”
(
p. 29)
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
On-screen operation guide
will help you.
14
INPUT
RETURN
MENU
DIRECT TV REC
PROGRAMME
REC
VCR DVD
TEXT F.P. INDEX
TV
ASPECT
OK
OPTION
VCR
132
465
798
0
HOLD
EXIT
1 BBS
CH05 SC1 Coronation Street
All Services
BBCi
6
7
8
1
2
3
4
Select
Connect
EXIT
RETURN
Page up
Page down
VCR
132
465
798
0
Watching TV
Select a programme using Information banner (p. 15)
Possible to con rm the programme name before selecting programmes.
Select a programme
up
Volume
2
Information banner appears
whenever you select a
programme
For details p. 15
Turn power on
(Press for about 1 second)
Mains power On / Off switch should be On. (p. 8)
down
or
1
To select the two or three-digit
programme number, e.g. 39
3
9
(in a short time)
Display Information banner
if it is not displayed
While the banner is displayed,
select the programme
Possible to set display
timeout in “Banner Display
Timeout” (p. 23).
HOLD
Freeze / unfreeze picture
Hold
Other useful functions
Display the
selectable
settings for
the current
programme
OPTION
Check or change the current
programme status instantly
To change
Teletext Character Set
Sets the teletext language
Setup Menu (p. 23)
MPX
Sound Menu (p. 22)
Volume Correction
Adjusts volume of individual programme or
input mode
Note
Also possible to change the settings in Menu list (p. 22 and p. 23).
select
change
To select from the Programme List
select
programme
watch
select programme
watch
Off Timer
Main Menu
VIERA Link
Picture
Sound
Setup
1/2
Service List Edit
Link Settings
Child Lock
Tuning Menu
Off Timer
OSD Language
Teletext TOP
Teletext Character Set West
Shipping Condition
Setup Menu
Off
MENU
Display the
menu
Select “Setup”
access
select
Select “Off Timer” and set the time
To cancel Set to “Off” or turn the TV off.
To display the remaining time Information banner (p. 15)
When the remaining time is within 3 minutes, the remaining time will ash on screen.
Turn the TV off automatically after a xed period
set
select
15
Viewing
Watching TV
Other useful functions
Display
Information
banner
Sound mute On
Teletext service available
Stereo, Mono
Audio mode
1 - 90
Off Timer remaining time
For settings p. 14
Display Information banner
Also appears when changing a programme
1 BBS
CH05 SC1 PAL
45Stereo
Coronation Street
Programme
Example:
Features available / Message meanings
To con rm another tuned
programme name
To watch the programme
listed in the banner
To hide
EXIT
To set display timeout
“Banner Display Timeout” (p. 23)
Event information is referred to teletext
signal.
Event
Sound System Colour System
Change
aspect
ratio
Auto 16:9
The best ratio is chosen and
the picture expanded to ll the
screen.
For details p. 40
Directly displays the image
at “16:9” without distortion
(anamorphic).
14:9 Just
Displays the image at the
standard “14:9” without
distortion.
Displays a “4:3” image
full-screen.
Stretching is only noticeable
at the left and right edges.
4:3 4:3 Full
Displays the image at the
standard “4:3” without
distortion.
Displays a “4:3” image
enlarged horizontally to t the
screen.
HD signal only
Zoom1 Zoom2
Displays a “16:9” letterbox or
“4:3” image without distortion.
Displays a “16:9” letterbox
(anamorphic) image
full-screen without distortion.
Zoom3
Displays a “2.35:1” letterbox (anamorphic)
image full-screen without distortion. At “16:9”,
displays the image at its maximum
(with slight enlargement).
Select
Change
EXIT
RETURN
Aspect selection
16:9
Just
14:9
4:3 Full
4:3
Zoom1
Zoom2
Zoom3
Auto
A
SPECT
Change the aspect ratio
Enjoy viewing the picture at its optimum size and aspect.
Aspect
Selection list
To change the mode using the ASPECT button only
A
SPECT
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
A
SPECT
While the list is displayed,
select the mode
Note
Not available in teletext mode.
Aspect mode can be memorized separately for SD (Standard de nition) and HD (High
de nition) signals.
store
select
16
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
ASPECT
INPUT
RETURN
EXIT
REC
VCR DVD
OPTION
DIRECT TV REC
MENU
OK
VCR
132
465
798
0
TEXT F.P. INDEX HOLD
TEXT
MENU
MENU
red
green
VCR
132
465
798
0
Viewing Teletext
Switch to Teletext
1
Select the page
Displays Index
(content varies
depending on the
broadcasters)
Time / date
Current
page
number
Sub page number
Colour bar
To adjust contrast
MENU
(Press three times)
To return to TV
TEXT
Using teletext conveniently
2
FULL /
TOP /
BOTTOM
Reveal
hidden
data
Re-hide
red
Reveal hidden words e.g. quiz page answers
(TOP) (BOTTOM)
(Expand the BOTTOM half)
Normal (FULL)
(Expand the TOP half)
As the blue bar is displayed
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
Fast overview of the teletext information available
Easy to use step-by-step selection of the topical subject
Page status information at the bottom of the screen
Available page up / down
red
green
To select among subject blocks
blue
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
yellow
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 17)
To change mode “Teletext” in Setup Menu (p. 23)
or
or
up
down
red
green
yellow
blue
(Corresponds to the colour bar)
17
Viewing
Viewing Teletext
INDEX
INDEX
Return to the main index page
HOLD
Stop automatic updating
(If you wish to hold the current page without updating)
To resume
HOLD
HOLD
View in
multi
window
Watch TV and Teletext in two windows at once
MENU
Operations can be made only in Teletext screen.
(Press twice)
Select Picture and text
On or Off
Call up a
favourite
page
F.P.
Call up the page stored in “blue”.
Factory setting is “P103”.
View a favourite page stored
Store
frequently
viewed
pages
Store frequently viewed pages in the colour bar
(List mode only)
press
and
hold
As page is
displayed
The number changes to white.
To change stored pages
press
and
hold
View sub
page
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Enter the
4-digit number
example: P6
0
0
0
6
Appears at top of
the screen
To view speci c sub page
MENU
blue
View sub page (Only when teletext is more than one page)
Watch
TV while
waiting
for update
P108
MENU
yellow yellow
Appears
when
updating is
completed
(You cannot change the programme.)
The news page provides a function that indicates arrival of latest news (“News Flash”).
Changes to TV screen temporarily
View the
updated
page
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
Corresponding
colour button
VCR
132
465
798
0
Enter new page number
Colour button you
want to change
18
ASPECT
RETURN
EXIT
MENU
DIRECT TV REC
OPTION
TEXT F.P. INDEX HOLD
TV
PROGRAMME
INPUT
OK
VCR
132
465
798
0
REC
VCR DVD
Watching Videos and DVDs
2
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment p. 10 and p. 11
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the input mode connected to the equipment
Note
If the external equipment has an aspect adjustment function, set to “16:9”.
For details, see the manual of the equipment or ask your local dealer.
To return to TV
Display the Input select menu
Displays the selected mode
1
Turn the TV on
When connecting with SCART as example 2 or 3 (p. 10 and p. 11)
Receives input signals automatically when playback starts
Input signals are automatically identi ed by the SCART (pin 8)
terminal.
This function is also available for HDMI connections (p. 38).
If input mode is not switched automatically
Perform and
Dependant on the setup of the equipment
You can also select the input using the AV button on the remote
control or the front panel of the TV.
Press the button repeatedly until the desired input is selected.
You can label or skip each input mode “Input Labels” (p. 30)
Input Selection
AV1
AV2/S
COMPONENT
AV3/S
HDMI1
HDMI2
TV
4
View
select
watch
19
Viewing
Watching Videos and DVDs
VCR DVD
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
PROGRAMME
Programme Up / Down
Select programme
REC
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
VCR DVD
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
Press
“VCR” position
Equipment Code
VCR 10 (default)
DVD 11
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre
71
Note
Con rm if the remote control works correctly after changing the code.
The codes will be reset to default values if batteries are replaced.
“DVD” means DVD player, DVD recorders and Recorder home theatre.
Some operations may not be possible on some equipment models.
VCR
132
465
798
0
Main Menu
VIERA Link
Picture
Sound
Setup
Picture Menu 1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
VCR
132
465
798
0
INPUT
ASPECT
OPTION
DIRECT TV REC
TEXT F.P. INDEX HOLD
PROGRAMME
REC
VCR DVD
TV
RETURN
EXIT
MENU
OK
1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
Picture Menu
Colour Balance Normal
Sharpness
Tuning Menu Access
MENU
20
How to Use Menu Functions
Display the menu
3
2
4
Various menus allow you to make settings for the picture, sound, and other functions.
Displays the functions that can be set
(varies according to the input signal)
To return to TV
at any time
EXIT
To return to the
previous screen
RETURN
To change menu
pages
up
down
Select the menu
Select the item
(example: Picture Menu)
Adjust or select
(example: Picture Menu)
(example: Picture Menu)
1
Changed
Number and positions of alternatives
Moved
Choose from among
alternatives
Adjust using the slide bar
Displays the next screen
Go to the next screen
To reset the settings
To reset the picture settings only
“Reset to Default”
in Picture Menu (p. 22)
To reset the sound settings only
“Reset to Default”
in Sound Menu (p. 22)
To initialize all settings
“Shipping Condition”
in Setup Menu (p. 29)
Enter characters by free input menu
You can enter names or numbers freely for some items.
access
select
change
store or access
( Required by
some functions)
select
User input
Name
ABCDEFGH I JKLMN
UVWXYZ 0123456
abcdefghi jklmn
uvwxyz ( )+- . *_
OPQRST
789 ! : #
opqr s t
Set characters
RETURN
Store
set
select
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Panasonic TH42PV8EYA Operating instructions

Category
Plasma TVs
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI