CB 608 W

IKEA CB 608 W User guide

  • Hello! I am an AI chatbot trained to assist you with the IKEA CB 608 W User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
9 M PRODUCT DESCRIPTION SHEET
GB
IGBD F NL E P GR
DK
S N FIN
1.
Tray (for ice packs and ice cube trays)
2.
Ice packs
3.
Control unit
4.
Area for drawers and pull out baskets
5.
Pull-out defrost water drain
6.
Thermometer
7.
Data plate (inside the appliance)
Note:
The design of drawers and accessories may vary, depending on the model.
6
2
13
57
4
40057-gb.fm5 Page 1 Wednesday, October 4, 2000 5:46 PM
Black Process Plate
9 M
5019 100 40057
Printed in Italy 10/00
IGBD F NL E P GR
DK
S N FIN
Controls
CONTROL UNIT:
A.
GREEN LED: indicates that the appliance is on.
B.
YELLOW LED: indicates that the fast freeze function is in operation.
C.
RED LED: indicates that the freezer temperature is too high (see “Troubleshooting Guide”).
D.
Switch for selection of fast freeze function.
E.
Acoustic alarm (if supplied): sounds when the freezer compartment temperature is too high.
F.
Door contact switch (if supplied).
F/a.
Door contact switch for deselection of acoustic alarm (if supplied).
G.
Thermostat.
Important:
To set a colder temperature, turn the thermostat clockwise (towards the right).
To switch the freezer off, turn the thermostat anticlockwise (towards the left).
Thermostat set to
z
: freezer switched off
Thermostat set to
1
:
least cold
internal temperature
Thermostat set to
2/3
:
intermediate
internal temperature
Thermostat set to
4
:
coldest
internal temperature
The average recommended thermostat setting is 2/3.
Note:
the yellow led
must light up only
during fast freezing.
To freeze the
maximum amount
of food possible, select the fast freeze function
24
h before placing
food in the freezer and to
deselect the function
24 h after placing the food.
ABCDGFE
F/a
40057-gb.fm5 Page 2 Wednesday, October 4, 2000 5:46 PM
Black Process Plate
/