John Lewis JLWM1204 User manual

Brand: John Lewis

Model: JLWM1204

Category: Washing machines

Type: User manual

This manual is also suitable for

JLWM1408

Washing Machine

JLWM 1204

JLWM 1408

User manual

Contents

Safety instructions 3

Product description 5

Control panel 6

On Off button 1 6

Programme knob 2 6

Display 3 7

Start/Pause button 4 7

Delay start button 5 7

Quick button 6 8

Extra rinse button 7 8

Spin button 8 8

Temperature button 9 8

Personalization 9

Use 10

First use 10

Daily use 10

Load the laundry 10

Detergent dispenser drawer 10

Check the position of the flap 11

Set a programme 11

Interrupt a programme 12

Cancel a programme 12

Change a function 12

Set the delay start 12

Cancel the delay start 12

Open the door 12

End of programme 13

Helpful hints and tips 14

Programmes 16

Technical data 19

Care and cleaning 20

Descaling 20

External cleaning 20

Detergent dispenser 20

Washing drum 21

Door seal 21

Drain pump 21

The inlet hose filter and the valve filter 22

Emergency emptying out 23

Frost precautions 23

Unpacking 25

Positioning and levelling 26

Fixing plate kit (405517114) 27

Plumbing in 27

Water inlet 27

Special conditions 27

Water drainage 28

In the interest of the environment 29

Electrical connection 29

What to do if… 31

Repairs - After Sales Service 34

Environment concerns 35

2 Washing Machine user manual

Safety instructions

Important! Read carefully and keep for

future reference.

• The safety of your appliance complies with

the industry standards and with legal

requirements. However, as manufacturers,

we feel it is our duty to provide the following

safety notes.

• It is most important that this instruction book

should be retained with the appliance for

future reference. Should the appliance be sold

or transferred to another owner, or should

you move house and leave the appliance,

always ensure that the book is supplied with

the appliance in order that the new owner

can get to know the functioning of the

appliance and the relevant warnings.

• You MUST read them carefully before

installing or using the appliance.

• Before first use, check the appliance for any

transit damage. Never connect up a damaged

appliance. If parts are damaged, contact your

supplier.

• If the appliance is delivered in the winter

months when there are minus temperatures.

Store it at room temperature for 24 hours

before using for the first time.

General safety

• It is dangerous to alter the specifications or

attempt to modify this product in any way.

• During high temperature wash programmes

the door glass may get hot. Do not touch it!

• Make sure that small children and animals do

not climb into the drum. To avoid this, please

check into the drum before using.

• Any objects such as coins, safety pins, nails,

screws, stones or any other hard, sharp

material can cause extensive damage and

must not be placed into the machine.

• Only use the advised quantities of fabric

softener and detergent. Damage to the fabric

can ensue if you over-fill. Refer to the

manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts etc in a washing bag or pillow

case as it is possible for such items to slip

down between the tub and the inner drum.

• Do not use your washing machine to wash

articles with whalebones, material without

hems or torn material.

• Always unplug the appliance and turn off the

water supply after use and during cleaning and

maintenance.

• Under no circumstances should you attempt

to repair the machine yourself. Repairs

carried out by inexperienced people may

cause injury or serious malfunctioning.

Contact your local Service Centre. Always

insist on genuine spare parts.

Installation

• This appliance is heavy. Care should be taken

when moving it.

• When unpacking the appliance, check that it is

not damaged. If in doubt, do not use it and

contact the Service Centre.

• All packing and transit bolts must be removed

before use. Serious damage can occur to the

product and to property if this is not adhered

to. See relevant section in the user manual.

Washing Machine user manual 3

• After having installed the appliance, check that

it is not standing on the inlet and drain hose

and the worktop is not pressing the electrical

supply cable against the wall.

• If the machine is situated on a carpeted floor,

please adjust the feet in order to allow air to

circulate freely under the appliance.

• Always be sure, that there is no water leakage

from hoses and their connections after the

installation.

• If the appliance is installed in a location subject

to frost, please read the “dangers of freezing”

chapter.

• Any plumbing work required to install this

appliance should be carried out by a qualified

plumber or competent person.

• Any electrical work required to install this

appliance should be carried out by a qualified

electrician or competent person.

Use

• This appliance is designed for domestic use. It

must not be used for purposes other than

those for which it was designed.

• Only wash fabrics which are designed to be

machine washed. Follow the instructions on

each garment label.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets are

empty and buttons and zips are fastened.

Avoid washing frayed or torn articles and

treat stains such as paint, ink, rust, and grass

before washing. Underwired bras must NOT

be machine washed.

• Garments which have been in contact with

volatile petroleum products should not be

machine washed. If volatile cleaning fluids are

used, care should be taken to ensure that the

fluid is removed from the garment before

placing in the machine.

• Never pull the power supply cable to remove

the plug from the socket; always take hold of

the plug itself.

• Never use the appliance if the power supply

cable, the control panel, the working surface

or the base are damaged so that the inside of

the washing machine is accessible.

Child Safety

• This appliance is not intended for use by

person (including children) with reduced

physical sensory or mental capabilities or lack

of experience and knowledge unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• The packaging components (e.g. plastic film,

polystyrene) can be dangerous to children -

danger of suffocation! Keep them out of

children's reach.

• Keep all detergents in a safe place out of

children’s reach.

• Make sure that children or pets do not climb

inside the drum.

4 Washing Machine user manual

Product description

12 3

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Rating plate

6. Drain pump

7. Feet for the appliance level

Accessories

1 2

4 3

Spanner

To remove the transit bolts.

Plastic hose guide

To connect the drain hose on the edge of a

sink.

Plastic caps

To close the holes on the rear side of the

cabinet after the removal of the transit

bolts.

Inlet hose

To connect the appliance to the cold water

tap.

Washing Machine user manual 5

Control panel

The Control Panel illustrated below shows the programme selector dial as well as the buttons and

pilot lights. These are represented by relevant numbers on the following pages.

repm

Spin

400

30°

40°

60°

95°

800

1200

1400

Cold

Quick

aleD

Extra

rinse

PauseStart /

ytefas dlihC

Cottons

with Prewash

Intensive

Synthetics

Easy iron

Delicates

Wool

Spin

Rinse

Reset

Cottons economy

20 Minute wash

Heavy cotton

Lingerie

Drain

Rinse

Hold

OffOn /

12 3

456789

1. On/Off button (On/Off)

2. Programme knob

3. Display

4. Start/Pause button

5. Delay Start button

6. Quick button

7. Extra rinse button

8. Spin button

9. Temperature button

On Off button 1

Press this button to activate or deactivate the

appliance. A tone sounds when the appliance is

activated.

The AUTO Stand-by function automatically

deactivates the appliance to decrease the energy

consumption when:

• You do not use the appliance for 5 minutes

before you press button 4.

– All settings are cancelled.

–

Press button 1 to activate the appliance

again.

– Set again the washing programme and all

possible options.

• After 5 minutes from the end of the washing

programme. Refer to 'At the end of

programme'.

Programme knob 2

Turn this knob to set a programme. The related

programme indicator comes on.

6 Washing Machine user manual

Display

ABC

The display shows:

• The programme time

When the programme starts, the time decreases with steps of 1 minute.

•The delay start

When you press the delay start button, the display shows the delay start time.

•Alarm codes

If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshooting' chapter.

•Err

The display shows this message for some seconds if:

– You set a function that is not applicable for the programme.

– You change the programme while it operates.

The indicator of the Start/Pause button

flashes.

•

When the programme is completed.

Door lock

• You cannot open the appliance door when the symbol is on.

• You cannot open the appliance door when the symbol flashes. Wait for some

minutes before you open the door.

• You can open the door only when the symbol goes off.

If the programme is completed but the symbol stays on:

• There is water in the drum.

• The 'Rinse Hold' function is on.

The child lock symbol

The symbol comes on when you activate this device.

Start/Pause button 4

Press button 4 to start or interrupt a

programme.

Delay start button 5

Press button 5 to delay the start of a

programme from 30 minutes to 20 hours.

Washing Machine user manual 7

Quick button 6

Press the button 6 to decrease the programme

duration.

•Press once to set 'Shortened duration' for

items with daily soil.

• Press twice to set 'Extra Quick' for items with

almost no soil.

Some programmes accept only one of

the two functions.

Extra rinse button 7

Press button 7 to add extra rinse to a

programme.

Use this function for persons allergic to

detergents and in areas where the water is soft.

Spin button 8

Press this button to:

• Decrease the maximum speed of the spin

phase of the programme.

• Activate the 'Rinse Hold' function. Set this

function to prevent fabric creases. The

appliance does not drain the water when the

programme is completed.

• The indicator ‘Rinse hold’ is on.

Temperature button 9

Press button 9 to change the default

temperature.

When the ‘Cold’ indicator is on, the appliance

does not heat the water.

8 Washing Machine user manual

Personalization

Acoustic signals function

You can hear the acoustic signals when:

• You activate the appliance.

• You deactivate the appliance.

• You press the buttons.

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic signals,

press the Temperature button and the Spin

button at the same time for 6 seconds.

If you deactivate the acoustic signals,

they continue operate only when you

press the buttons and when a

malfunction occurs.

Child lock function

This function prevents children playing with the

control panel.

•

To activate the function, press the Extra

rinse and the Quick buttons at the same

time until the display shows the symbol

•

To deactivate the function, press the Extra

rinse and Quick buttons at the same time

until the symbol

goes off.

You can activate the function:

•

Before you press the Start/Pause button 4:

the appliance cannot start.

•

After you press the Start/Pause button 4, all

the buttons and the programme knob are

deactivated.

Permanent extra rinse function

With this function you can keep the extra rinse

function permanently on when you set a new

programme.

•

To activate the function press the Quick

button and the Delay start button at the

same time until the indicator of button 7 is

on.

•

To deactivate the function press Quick and

Delay start buttons at the same time until

the indicator of button 7 is off.

Washing Machine user manual 9

Use

First use

1. To activate the drain system, put 2 litres of

water in the main wash compartment of the

detergent dispenser.

2. Put a small quantity of detergent in the main

wash compartment of the detergent

dispenser. Set and start a programme for

cotton at the highest temperature without

laundry. This removes all possible dirt from

the drum and the tub.

Daily use

1. Open the water tap.

2. Connect the mains plug to the mains

socket.

Press button 1 to activate the appliance.

4. Put the laundry in the appliance.

5. Use the correct quantity of detergent and

additives.

6. Set and start the correct programme for

the type of laundry and soil.

Load the laundry

1. Open the appliance door.

2. Put the laundry in the drum, one item at a

time. Shake the items before you put them

in the appliance. Make sure not to put too

much laundry in the drum.

3. Close the door.

Make sure that no laundry stays between the

seal and the door. There is a risk of water

leakage or damage to the laundry.

Detergent dispenser drawer

•

: Detergent compartment for the

prewash phase, the soak programme and for

the stain function. Add the detergent for

prewash, soak and stain remover before the

start of the programme.

10 Washing Machine user manual

•

: Detergent compartment for the

washing phase. If you use a liquid detergent,

put it in immediately before you start the

programme.

•

: Liquid additives compartment (fabric

conditioner, starch). Put the liquid in the

compartment before you start the

programme.

•

: Maximum level for the quantity of

liquid additives.

•

Flap for powder or liquid

detergent. Turn it (up or down) in the correct

position to use powder or liquid detergent.

Always follow the instructions that you

find on the packaging of the detergent

products.

Check the position of the flap

1. Pull out the detergent dispenser until it

stops.

2. Press the lever down to remove the

dispenser.

3. To use powder detergent, turn the flap up.

4. To use liquid detergent, turn the flap down.

With the flap in the position

DOWN:

– Do not use very thick liquid

detergents.

– Do not put more liquid detergent

than the limit indicated in the flap.

– Do not set the prewash phase.

– Do not set the delay start function.

5. Measure out the detergent and the fabric

conditioner.

6. Carefully close the detergent dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

Set a programme

1. Turn the programme knob.

The indicator of button 4 flashes in red

colour.

Washing Machine user manual 11

3. The indicators of the default temperature

and spin speed come on. To change the

temperature and/or the spin speed, press

the related buttons.

4. Set the available functions and the delay

start. When you press the relevant button,

the indicator of the set function comes on

or the display shows the related symbol.

Press button 4 to start the programme. The

indicator of button 4 is on with red colour.

The drain pump can operate for a

short time when the appliance fills

water.

The appliance adjusts automatically the

cycle time to the laundry you have put

in the drum to have perfect washing

results in the minimum necessary time.

After approximately 15 minutes from

the start of the programme, the display

shows the new time value.

Interrupt a programme

Press button 4. The indicator flashes.

Press button 4 again. The washing

programme continues.

Cancel a programme

Turn the programme knob to

to cancel

the programme.

2. Turn again the programme knob to a new

washing programme. At this time you can

also set the available functions.

The appliance does not drain the

water.

Change a function

You can change only some functions before they

operate.

Press button 4. The indicator flashes.

2. Change the function set.

Set the delay start

Press button 5 repeatedly until the display

shows the number of minutes or hours.

Press button 4, the appliance starts the

countdown of the delay start.

When the countdown is completed, the

programme starts automatically.

Before you press button 4 to start the

appliance, you can cancel or change

the delay start.

You cannot set the delay start with the

Steam programme.

Cancel the delay start

Press button 4. The related indicator

flashes.

Press button 5 repeatedly until the display

shows 0’.

Press button 4. The programme starts.

Open the door

While a programme or the delay start operates,

the appliance door is locked.

To open the appliance door:

Press button 4. The door lock symbol in

the display goes off.

2. Open the appliance door.

3. Close the appliance door and press button

4. The programme or the delay start

continues.

12 Washing Machine user manual

If the temperature and level of the

water in the drum are too high, the

door lock symbol stays on and you

cannot open the door. To open the

door follow the steps below:

1. Deactivate the appliance.

2. Wait for some minutes.

3. Make sure that no water is in the

drum.

Important! If you deactivate the

appliance, it is necessary to set the

programme again.

End of programme

• The appliance stops automatically.

• The acoustic signals operate.

•

In the display

comes on.

•

The indicator of the Start/Pause button 4

goes off.

• The door lock symbol goes off.

•

Press button 1 to deactivate the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the appliance again,

the display show the end of the last set

programme. Turn the programme

knob to set a new cycle.

• Remove the laundry from the appliance. Make

sure that the drum is empty.

• Keep the door ajar, to prevent mildew and

odours.

• Close the water tap.

The washing programme is completed,

but there is water in the drum:

– The drum turns regularly to prevent the

creases in the laundry.

–The door stays locked.

– You must drain the water to open the door.

To drain the water:

1. If necessary, decrease the spin speed.

Press the Start/Pause button 4. The

appliance drains the water and spins.

3. When the programme is completed and the

door lock symbol goes off, you can open

the door

4. Deactivate the appliance.

The appliance drains and spins

automatically after approximately 18

hours.

Washing Machine user manual 13

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each garment

label and the manufacturer’s washing

instructions. Sort the laundry as follows: whites,

coloureds, synthetics, delicates, woollens.

Before loading the laundry

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the wash.

New coloured items may run in the first wash;

they should therefore be washed separately the

first time.

Make sure that no metal objects are left

in the laundry (e.g. hair clips, safety pins,

pins).

Button up pillowcases, close zip fasteners, hooks

and poppers. Tie any belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove hooks

or tie them up in a bag or net.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisable to

treat them prior to washing.

Special stain removers are available. Use an

appropriate stain remover and always follow the

instruction given.

Detergents and additives

Good washing results also depend on the choice

of detergent and use of the correct quantities to

avoid waste and protect the environment.

Although biodegradable, detergents contain

substances which, in large quantities, can upset

the delicate balance of nature.

The choice of detergent will depend on the type

of fabric (delicates, woollens, cottons, etc.), the

colour, washing temperature and degree of

soiling.

All commonly available washing machine

detergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics (60°C

max) and woollens

• liquid detergents, preferably for low

temperature wash programmes (60°C max)

for all types of fabric, or special for woollens

only.

The detergent and any additives must be placed

in the appropriate compartments of the

dispenser drawer before starting the wash

programme.

If using liquid detergents, a programme without

prewash must be selected.

Your appliance incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s

recommendations on quantities to use and do

not exceed the «MAX» mark in the

detergent dispenser drawer.

Quantity of detergent to be used

The type and quantity of detergent will depend

on the type of fabric, load size, degree of soiling

and hardness of the water used.

Follow the product manufacturers’ instructions

on quantities to use.

Use less detergent if:

• you are washing a small load

• the laundry is lightly soiled

• large amounts of foam form during washing.

14 Washing Machine user manual

Degrees of water hardness

Water hardness is classified in so-called

“degrees” of hardness. Information on hardness

of the water in your area can be obtained from

the relevant water supply company, or from

your local authority. If the water hardness

degree is medium or high we suggest you to add

a water softener following always the

manufacturer’s instructions. When the degree of

hardness is soft, readjust the quantity of the

detergent.

Washing Machine user manual 15

Programmes

Programme

Temperature

Type of load

max. weight of load

Cycle

description

Functions

Cottons

95° - Cold

White and coloured cotton

with normal soil.

max. 7 kg

Wash

Rinses

Long spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

with Prewash

95° - Cold

White and coloured cotton

with heavy soil.

max. 7 kg

Prewash

Wash

Rinses

Long spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

Intensive

95° - 40°

White and coloured cotton

with heavy soil.

max. 7 kg

Wash

Rinses

Long spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

Textiles

Synthetics

60° - Cold

Synthetic or mixed fabric

items with normal level of soil.

max. 3.5 kg

Wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

Easy iron

60° - Cold

Synthetic fabric items with

normal soil.

max. 3.5 kg

Wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

Delicates

40° - Cold

Delicate fabrics as acrylics,

viscose, polyester items with

normal soil.

max. 3.5 kg

Wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

Wool

40° - Cold

Machine washable wool.

Hand washable wool and

delicate fabrics with «hand

washing» care symbol.

max. 2 kg

Wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

Extra programmes

Spin

All fabrics

The maximum load of the

laundry is related to the type

of laundry.

Drainage of the water

Spin phase at the

maximum speed.

SPIN REDUCTION

16 Washing Machine user manual

Programme

Temperature

Type of load

max. weight of load

Cycle

description

Functions

Drain All fabrics

The maximum load of the

laundry is related to the type

of laundry.

Drainage of the water

Rinse All fabrics. One rinse with additive

spin phase

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

Lingerie

40° - Cold

Special programme for

lingerie. It adds automatically

a prewash phase.

max. 1 kg

Prewash

Wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

Heavy cotton

60° - Cold

All items in jeans. Jersey made

items with hi-tech materials.

max. 7 kg

Wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

20 Minute wash

40° - 30°

Cotton and synthetic items

with light soil or worn only

one time.

Wash

Rinses

Short spin

SPIN REDUCTION

Cottons economy

60° - 40°

White and fast coloured

cotton with normal soil.

max. 7 kg

Wash

Rinses

Long spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

QUICK

1) if you press the button 6 two times (Extra Quick duration), we recommend that you decrease the quantity of the load. It is

possible to load fully the appliance, however the washing results are reduced.

2) The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds some rinses.

3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry.

4) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin.

5) Standard programmes for the Energy Label consumption values according to regulation 1061/2010, the ‘Cottons Economy 60°

C’ and “Cottons Economy 40° C” are respectively the “standard 60° C cotton programme” and the “standard 40° C cotton

programme”. They are the most efficient programmes in terms of combined energy and water consumption for washing

normally soiled cotton laundry.

For «cottons economy» programmes you can only set the ‘Extra Quick’ duration.

Consumption values

The data of this table are approximate. Different causes can change the data: the quantity

and type of laundry, the water and ambient temperature.

Washing Machine user manual 17

Programmes Load

(kg)

Energy

consumpti

on (kWh)

Water

consumptio

n (litre)

Approxim

ate

programm

e duration

(minutes)

Remaining

moisture

(%)

JLWM 1204

Remaining

moisture

(%)

JLWM 1408

Cottons 60 °C 7 1.30 62 157 53 52

Cottons 40 °C 7 0.80 62 154 53 52

Synthetics 40 °C 3.5 0.53 45 127 35 35

Delicates 40 °C 3.5 0.57 53 100 35 35

Wool/Hand wash

30 °C

20.25 45 56 30 30

Standard cotton programmes

Standard 60 °C

cotton

7 1.05 52 240 53 52

Standard 60 °C

cotton

3.5 0.74 41 215 53 52

Standard 40 °C

cotton

3.5 0.52 41 210 53 52

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.75 0.75

18 Washing Machine user manual

Technical data

Dimensions Width

Height

Depth

Depth (Overall dimensions)

60 cm

85 cm

52,2 cm

54 cm

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating plate, on

the inner edge of the appliance door.

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 7 kg

Spin Speed Maximum 1200 rpm (JLWM 1204)

1400 rpm (JLWM 1408)

Washing Machine user manual 19

Care and cleaning

You must DISCONNECT the appliance from

the electricity supply, before you can carry out

any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a

good idea to periodically use a water softening

powder in the machine. Do this separately from

any laundry washing, and according to the

softening powder manufacturer's instructions.

This will help to prevent the formation of lime

deposits.

After each wash

Leave the door open for a while. This helps to

prevent mould and stagnant smells forming

inside the appliance. Keeping the door open

after a wash will also help to preserve the door

seal.

Maintenance wash

With the use of low temperature washes it is

possible to get a build up of residues inside the

drum.

We recommend that a maintenance wash be

performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be

a powder with biological properties.

External cleaning

Clean the exterior cabinet of the appliance with

soap and water only, and then dry thoroughly.

Important! Do not use methylated

spirits, solvents or similar products to

clean the cabinet.

Detergent dispenser

1. Press the lever.

2. Pull the dispenser out.

3. Remove the top part of the liquid additive

compartment.

4. Clean all the parts with water.

5. Clean the dispenser recess with a brush.

20 Washing Machine user manual

Page is loading ...

John Lewis JLWM1204 User manual

Brand: John Lewis

Model: JLWM1204

Category: Washing machines

Type: User manual

This manual is also suitable for

JLWM1408

Download PDF

report

John Lewis JLWM1204 User manual

This manual is also suitable for

John Lewis JLWM1204 User manual

Related papers

Other documents